Texas Mold Remediation Regulations and
IICRC S520 Standards | 100% Correctly
Answered & Rated A+ | 2025/2026 Guide
Legal requirements regarding safety measures during remediation
- Correct Answer - Contractors must implement safety protocols,
including proper ventilation and PPE, to safeguard workers and
occupants.
TDLR requirements regarding advertising and soliciting work
- Correct Answer - All advertising must accurately represent the
contractor's qualifications and services without misleading information.
Requirement for using 'Certified Mold Remediator' in advertisements
- Correct Answer - Contractors must be actually certified by an
accredited provider to use the title.
Action contractors must take if they discover a health hazard during an
assessment - Correct Answer - They must immediately notify the
property owner and recommend appropriate action, potentially involving
local health authorities.
Definition of 'mold remediation' according to TDLR
,- Correct Answer - The removal, cleaning, or sealing of mold from the
environment to prevent further contamination.
Prohibitions under TDLR regulations for contractors
- Correct Answer - They may not perform mold remediation illegally
without a license or misrepresent their qualifications.
IICRC S520 requirements for dealing with water-damaged materials
- Correct Answer - All affected materials should be properly assessed
and either remediated or replaced based on the level of contamination.
TDLR requirements regarding mold assessment reports
- Correct Answer - Reports must be accurate, legible, and include the
findings and conclusions of the assessment.
Post-remediation requirement under Texas law
- Correct Answer - Post-remediation verification must be conducted to
evaluate if remediation was successful.
IICRC S520 guidelines on cleaning techniques for mold remediation
- Correct Answer - Cleaning should include HEPA vacuuming, surface
cleaning, and disinfection as appropriate for the material.
, What measures should contractors take to prevent dust and spores from
spreading?
- Correct Answer - Use of containment barriers, negative air pressure,
and proper clean-up protocols after work is completed.
What information must be provided in the mold remediation work plan?
- Correct Answer - Description of work methods, health and safety
measures, and expected outcomes of the remediation process.
What is the responsibility of contractors in case of a mold outbreak
during the warranty period?
- Correct Answer - They must address any re-emergence of mold
according to the warranty terms set forth in the initial service agreement.
How does TDLR define a "mold inspection"?
- Correct Answer - A comprehensive examination of a structure to
assess mold presence, extent, and any underlying issues related to
moisture.
What is the process a contractor should follow if significant mold growth
is discovered during work?
- Correct Answer - Stop the process, notify the client immediately, and
adjust the remediation plan to address the extent of the problem.
IICRC S520 Standards | 100% Correctly
Answered & Rated A+ | 2025/2026 Guide
Legal requirements regarding safety measures during remediation
- Correct Answer - Contractors must implement safety protocols,
including proper ventilation and PPE, to safeguard workers and
occupants.
TDLR requirements regarding advertising and soliciting work
- Correct Answer - All advertising must accurately represent the
contractor's qualifications and services without misleading information.
Requirement for using 'Certified Mold Remediator' in advertisements
- Correct Answer - Contractors must be actually certified by an
accredited provider to use the title.
Action contractors must take if they discover a health hazard during an
assessment - Correct Answer - They must immediately notify the
property owner and recommend appropriate action, potentially involving
local health authorities.
Definition of 'mold remediation' according to TDLR
,- Correct Answer - The removal, cleaning, or sealing of mold from the
environment to prevent further contamination.
Prohibitions under TDLR regulations for contractors
- Correct Answer - They may not perform mold remediation illegally
without a license or misrepresent their qualifications.
IICRC S520 requirements for dealing with water-damaged materials
- Correct Answer - All affected materials should be properly assessed
and either remediated or replaced based on the level of contamination.
TDLR requirements regarding mold assessment reports
- Correct Answer - Reports must be accurate, legible, and include the
findings and conclusions of the assessment.
Post-remediation requirement under Texas law
- Correct Answer - Post-remediation verification must be conducted to
evaluate if remediation was successful.
IICRC S520 guidelines on cleaning techniques for mold remediation
- Correct Answer - Cleaning should include HEPA vacuuming, surface
cleaning, and disinfection as appropriate for the material.
, What measures should contractors take to prevent dust and spores from
spreading?
- Correct Answer - Use of containment barriers, negative air pressure,
and proper clean-up protocols after work is completed.
What information must be provided in the mold remediation work plan?
- Correct Answer - Description of work methods, health and safety
measures, and expected outcomes of the remediation process.
What is the responsibility of contractors in case of a mold outbreak
during the warranty period?
- Correct Answer - They must address any re-emergence of mold
according to the warranty terms set forth in the initial service agreement.
How does TDLR define a "mold inspection"?
- Correct Answer - A comprehensive examination of a structure to
assess mold presence, extent, and any underlying issues related to
moisture.
What is the process a contractor should follow if significant mold growth
is discovered during work?
- Correct Answer - Stop the process, notify the client immediately, and
adjust the remediation plan to address the extent of the problem.
