WATER AND FUEL SYSTEMS
MAINTENANCE JOURNEYMAN VOLUME
1 WITH COMPLETE SOLUTIONS
The manuals the Air Force (AF) develops or pays a contractor to develop for all
equipment built to military specifications are called?
a. Technical orders (TO)
b. joint use manuals
c. commercial off the shelf (COTS) manuals
d. time compliance technical orders (TCTO) manuals - ANSWER-a. Technical orders
(TO)
Which manuals use a layout that follows the one used by the branch of service that
initially had it developed?
a. technical orders (TO)
b. joint use manuals
c. technical manuals(TM)
d. commercial off the shelf (COTS) manual - ANSWER-b. joint use manuals
Which manual comes with locally procured equipment items?
a. technical orders (TO)
b. joint use manuals
c. technical manuals(TM)
d. commercial off the shelf (COTS) manual - ANSWER-d. commercial off the shelf
(COTS) manual
Which manuals may include actions to modify equipment, perform special inspections,
or change operating procedures?
a. time compliance technical orders (TCTO)
b. abbreviated technical orders (TO)
c. technical manuals
d. joint use manuals - ANSWER-a. time compliance technical orders (TCTO)
Which type of time compliance technical orders can be identified by a border of red Xs
around the page?
a. inspection
b. urgent action
, c. routine action
d. immediate action - ANSWER-d. immediate action
Which type of time compliance technical orders can be identified by a border of
alternating red Xs and slashes (/) around the page?
a. inspection
b. urgent action
c. routine action
d. immediate action - ANSWER-b. urgent action
Why must you identify any problems you find in a technical order (TO)?
a. it shows that you read the TO
b. it shows that you always use the TO
c. to allow all Air Force personnel to complete the task differently
d. to allow all AF personnel to complete the task the same way - ANSWER-d. to allow
all AF personnel to complete the task the same way
Which is the best method to make corrections to problems in a technical order?
a. a team effort of many airman
b. your effort researching the problem
c. a team effort of many knowledgeable individuals
d. your effort experimenting with possible corrections - ANSWER-c. a team effort of
many knowledgeable individuals
What Air Force instruction (AFI) covers waste management?
a. AFI 36-2903
b. AFI 32-7042
c. AFI 38-5243
d. AFI 33-2233 - ANSWER-b. AFI 32-7042
Where can you find container labeling guidelines?
a. installation hazardous waste management plan (HWMP)
b. in the power production section
c. the environmental flight
d. installation library - ANSWER-a. installation hazardous waste management plan
(HWMP)
What are the three principal accident prevention methods?
a. punishment, disciplinary action, and deterrence
b. behavior modification, motivation, and strict adhere to the rules
MAINTENANCE JOURNEYMAN VOLUME
1 WITH COMPLETE SOLUTIONS
The manuals the Air Force (AF) develops or pays a contractor to develop for all
equipment built to military specifications are called?
a. Technical orders (TO)
b. joint use manuals
c. commercial off the shelf (COTS) manuals
d. time compliance technical orders (TCTO) manuals - ANSWER-a. Technical orders
(TO)
Which manuals use a layout that follows the one used by the branch of service that
initially had it developed?
a. technical orders (TO)
b. joint use manuals
c. technical manuals(TM)
d. commercial off the shelf (COTS) manual - ANSWER-b. joint use manuals
Which manual comes with locally procured equipment items?
a. technical orders (TO)
b. joint use manuals
c. technical manuals(TM)
d. commercial off the shelf (COTS) manual - ANSWER-d. commercial off the shelf
(COTS) manual
Which manuals may include actions to modify equipment, perform special inspections,
or change operating procedures?
a. time compliance technical orders (TCTO)
b. abbreviated technical orders (TO)
c. technical manuals
d. joint use manuals - ANSWER-a. time compliance technical orders (TCTO)
Which type of time compliance technical orders can be identified by a border of red Xs
around the page?
a. inspection
b. urgent action
, c. routine action
d. immediate action - ANSWER-d. immediate action
Which type of time compliance technical orders can be identified by a border of
alternating red Xs and slashes (/) around the page?
a. inspection
b. urgent action
c. routine action
d. immediate action - ANSWER-b. urgent action
Why must you identify any problems you find in a technical order (TO)?
a. it shows that you read the TO
b. it shows that you always use the TO
c. to allow all Air Force personnel to complete the task differently
d. to allow all AF personnel to complete the task the same way - ANSWER-d. to allow
all AF personnel to complete the task the same way
Which is the best method to make corrections to problems in a technical order?
a. a team effort of many airman
b. your effort researching the problem
c. a team effort of many knowledgeable individuals
d. your effort experimenting with possible corrections - ANSWER-c. a team effort of
many knowledgeable individuals
What Air Force instruction (AFI) covers waste management?
a. AFI 36-2903
b. AFI 32-7042
c. AFI 38-5243
d. AFI 33-2233 - ANSWER-b. AFI 32-7042
Where can you find container labeling guidelines?
a. installation hazardous waste management plan (HWMP)
b. in the power production section
c. the environmental flight
d. installation library - ANSWER-a. installation hazardous waste management plan
(HWMP)
What are the three principal accident prevention methods?
a. punishment, disciplinary action, and deterrence
b. behavior modification, motivation, and strict adhere to the rules
