JLTV Test A: Verified Questions & Answers for Operator-Level Success |2025 Exam UPDATES.
VERIFIED.
This JLTV Test A study set is built to help you pass your Joint Light Tactical Vehicle training with
confidence. It includes verified questions and accurate answers based on real course content and test
formats. Designed for both new trainees and experienced personnel needing a refresher, this guide
focuses on what matters most: vehicle systems, basic operations, safety protocols, and mission-
readiness
10. What do you do if an item in the Basic Issue Items (BIl) appears to be broken or unserviceable?
A. Try to fix it.
B. Annotate it on the BIl Inventory as serviceable.
C. Annotate it on the Bll Inventory as unserviceable and then continue with your mission.
D. Annotate it on the BII Inventory and call MT representative - ✔✔-D. Annotate it on the BII Inventory
and call MT representative
11. List five Before Operations Inspection items to check before driving the JLTV. - ✔✔-Possible
answers include:
Damage or pilferage; Leaks; Fuel, oil, and water levels; Engine warm-up; Instruments; Safety devices;
Tools and equipment
12. Why must you install suspension lockout braces before crawling under the vehicle? - ✔✔-Answer:
The suspension lockout braces prevent the suspension from fully collapsing, as that would crush the
personnel underneath the vehicle.
13. While conducting PMCS, you notice the transmission fluid has a small leak but it is not big enough to
form a drop. Classify the leak and decide if you can operate the vehicle.
A. It is a Class I leak so you can operate the vehicle.
B. It is a Class I leak so you CANNOT operate the vehicle.
C. It is a Class II leak so you can operate the vehicle.
D. It is a Class II leak so you CANNOT operate the vehicle. - ✔✔-A. It is a Class I leak so you can
operate the vehicle.
14. Identify the fill locations on the following image of the JL TV engine. Write the letter of the location
next to the corresponding fill location description. - ✔✔-Brake Fluid Fill A and D
, Coolant Fill G
Engine Oil Fill F
Hydraulic Fluid Fill/Power Steering E
Transmission Fill B
Windshield Washer Fill C
15 - ✔✔-When Wheels are slipping, Corners and Curves
16 - ✔✔-Push
17 - ✔✔-D. Release the throttle Gently, Steer into weight
18. - ✔✔-No
19. Why must you use tow bar adapters when attaching the medium duty tow bar to the disabled JLTV?
A. The tow bar adapters allow for maneuverability of the tow vehicle during a flat-tow.
B. The use of the tow bar adapters increases the Available Effort (AE) of the towed vehicle.
C. The tow bar adapters increase the pull capacity of the tow bar.
D. The tow bar adapters prevent the winch rope from chafing and parting. - ✔✔-A. The tow bar adapters
allow for maneuverability of the tow vehicle during a flat-tow.
2. Why do the High Pressure Gas (HPG) pumps automatically stop running after running continuously for
10 minutes?
A. To prevent overcharging of the suspension components and HPG Spring components
B. To prevent the SPNSN ERROR light from illuminating
C. To prevent the hydraulic pumps that power the springs' pumps from overheating
D. To prevent system leakage - ✔✔-C. To prevent the hydraulic pumps that power the springs' pumps
from overheating
VERIFIED.
This JLTV Test A study set is built to help you pass your Joint Light Tactical Vehicle training with
confidence. It includes verified questions and accurate answers based on real course content and test
formats. Designed for both new trainees and experienced personnel needing a refresher, this guide
focuses on what matters most: vehicle systems, basic operations, safety protocols, and mission-
readiness
10. What do you do if an item in the Basic Issue Items (BIl) appears to be broken or unserviceable?
A. Try to fix it.
B. Annotate it on the BIl Inventory as serviceable.
C. Annotate it on the Bll Inventory as unserviceable and then continue with your mission.
D. Annotate it on the BII Inventory and call MT representative - ✔✔-D. Annotate it on the BII Inventory
and call MT representative
11. List five Before Operations Inspection items to check before driving the JLTV. - ✔✔-Possible
answers include:
Damage or pilferage; Leaks; Fuel, oil, and water levels; Engine warm-up; Instruments; Safety devices;
Tools and equipment
12. Why must you install suspension lockout braces before crawling under the vehicle? - ✔✔-Answer:
The suspension lockout braces prevent the suspension from fully collapsing, as that would crush the
personnel underneath the vehicle.
13. While conducting PMCS, you notice the transmission fluid has a small leak but it is not big enough to
form a drop. Classify the leak and decide if you can operate the vehicle.
A. It is a Class I leak so you can operate the vehicle.
B. It is a Class I leak so you CANNOT operate the vehicle.
C. It is a Class II leak so you can operate the vehicle.
D. It is a Class II leak so you CANNOT operate the vehicle. - ✔✔-A. It is a Class I leak so you can
operate the vehicle.
14. Identify the fill locations on the following image of the JL TV engine. Write the letter of the location
next to the corresponding fill location description. - ✔✔-Brake Fluid Fill A and D
, Coolant Fill G
Engine Oil Fill F
Hydraulic Fluid Fill/Power Steering E
Transmission Fill B
Windshield Washer Fill C
15 - ✔✔-When Wheels are slipping, Corners and Curves
16 - ✔✔-Push
17 - ✔✔-D. Release the throttle Gently, Steer into weight
18. - ✔✔-No
19. Why must you use tow bar adapters when attaching the medium duty tow bar to the disabled JLTV?
A. The tow bar adapters allow for maneuverability of the tow vehicle during a flat-tow.
B. The use of the tow bar adapters increases the Available Effort (AE) of the towed vehicle.
C. The tow bar adapters increase the pull capacity of the tow bar.
D. The tow bar adapters prevent the winch rope from chafing and parting. - ✔✔-A. The tow bar adapters
allow for maneuverability of the tow vehicle during a flat-tow.
2. Why do the High Pressure Gas (HPG) pumps automatically stop running after running continuously for
10 minutes?
A. To prevent overcharging of the suspension components and HPG Spring components
B. To prevent the SPNSN ERROR light from illuminating
C. To prevent the hydraulic pumps that power the springs' pumps from overheating
D. To prevent system leakage - ✔✔-C. To prevent the hydraulic pumps that power the springs' pumps
from overheating
