NC Locksmith Exam Section 8| Exam Questions with Complete Solutions 100%
Solved| Grade A+
Depth Key set a set of keys used to make a code original key on a key duplicating machine to
a lock manufacturers given set of key bitting specifications. Each key is cut with the correct
spacing to one depth only in all bitting positions, with one key for each depth
Impression Technique a means of fitting a key directly to a locked cylinder by manipulating a
blank in the keyway and cutting the blank where the tumblers have made marks
Key pull(s) a lock specification which indicates by quantity and orientation the position(s) at
which a key may be withdrawn
Key Pull Position any position, of the cylinder plug at which the key can be removed
Primary Key a key, which operates the ignition lock on a vehicle. It may or may not also
operate some or all the other locks on the vehicle
Progression a logical sequence of selecting possible key bittings, usually in numerical order
from the key bitting array
Resistor Pellet the encapsulated resistor with exposed contacts installed in a key, such as
that for VATS
Secondary key a key which operates certain locks on a vehicle, but not the ignition lock
Tip Stop a type of stop located near the tip of the key
Solved| Grade A+
Depth Key set a set of keys used to make a code original key on a key duplicating machine to
a lock manufacturers given set of key bitting specifications. Each key is cut with the correct
spacing to one depth only in all bitting positions, with one key for each depth
Impression Technique a means of fitting a key directly to a locked cylinder by manipulating a
blank in the keyway and cutting the blank where the tumblers have made marks
Key pull(s) a lock specification which indicates by quantity and orientation the position(s) at
which a key may be withdrawn
Key Pull Position any position, of the cylinder plug at which the key can be removed
Primary Key a key, which operates the ignition lock on a vehicle. It may or may not also
operate some or all the other locks on the vehicle
Progression a logical sequence of selecting possible key bittings, usually in numerical order
from the key bitting array
Resistor Pellet the encapsulated resistor with exposed contacts installed in a key, such as
that for VATS
Secondary key a key which operates certain locks on a vehicle, but not the ignition lock
Tip Stop a type of stop located near the tip of the key
