FLORIDA ROOFING TRADE KNOWLEDGE
TEST PREP (GCS) | 117 QUESTIONS |
WITH ACTUAL SOLUTIONS!!
1 of
117
Term
It is recommended that drip edge metal for tile roof systems be
fabricated from:
REFERENCE: NRCA Steep Slope (2021) PG. 226
Give this one a try later!
16 oz copper 10 oz zinc
, 12 oz aluminum
8 oz plastic
Don't know?
2 of 117
Term
Who is responsible for requiring the wearing of appropriate
personal protective equipment?
REFERENCE: OSHA - 1926.28(a)
Give this one a try later!
The employer The manufacturer
The employee The worker's insurance
Don't know?
, 3 of 117
Term
Per Roofing Construction and Estimating, back nailing is:
REFERENCE: RCE-(2015) - pg. 297
Give this one a try later!
To enhance aesthetic appeal To improve insulation properties
To stop membranes
To reduce material costs from
slipping
Don't know?
4 of 117
Term
According to the Florida Building Code, what is the MINIMUM
thickness of Aluminum used for metal flashing?
REFERENCE: FBC-B - TABLE 1503.2
Give this one a try later!
0.024 inches 0.030 inches
, 0.015 inches 0.050 inches
Don't know?
5 of 117
Term
Fishmouths are caused by:
REFERENCE: RCE-(2015) - pg. 330
Give this one a try later!
Excessive heat exposure Inadequate drainage
Improper alignment of the
felts Poor material quality
Don't know?
6 of 117
Term
Stationary louver blades should be pitched a minimum angle of:
REFERENCE: SMACNA-PG. 9.4
TEST PREP (GCS) | 117 QUESTIONS |
WITH ACTUAL SOLUTIONS!!
1 of
117
Term
It is recommended that drip edge metal for tile roof systems be
fabricated from:
REFERENCE: NRCA Steep Slope (2021) PG. 226
Give this one a try later!
16 oz copper 10 oz zinc
, 12 oz aluminum
8 oz plastic
Don't know?
2 of 117
Term
Who is responsible for requiring the wearing of appropriate
personal protective equipment?
REFERENCE: OSHA - 1926.28(a)
Give this one a try later!
The employer The manufacturer
The employee The worker's insurance
Don't know?
, 3 of 117
Term
Per Roofing Construction and Estimating, back nailing is:
REFERENCE: RCE-(2015) - pg. 297
Give this one a try later!
To enhance aesthetic appeal To improve insulation properties
To stop membranes
To reduce material costs from
slipping
Don't know?
4 of 117
Term
According to the Florida Building Code, what is the MINIMUM
thickness of Aluminum used for metal flashing?
REFERENCE: FBC-B - TABLE 1503.2
Give this one a try later!
0.024 inches 0.030 inches
, 0.015 inches 0.050 inches
Don't know?
5 of 117
Term
Fishmouths are caused by:
REFERENCE: RCE-(2015) - pg. 330
Give this one a try later!
Excessive heat exposure Inadequate drainage
Improper alignment of the
felts Poor material quality
Don't know?
6 of 117
Term
Stationary louver blades should be pitched a minimum angle of:
REFERENCE: SMACNA-PG. 9.4
