NAUI eLearning (SCUBA) Exam Questions
and Answers 100% Pass
Any time you enter the water to scuba dive, there is risk of an accident. - ANS True
The responsibility of your well being depends on: - ANS You
A pre-existing medical contraindication might disqualify you from scuba diving. - ANS True
Areas of concern are: - ANS Circulatory
Respiratory
Air spaces
All of the above
You need to be a skilled swimmer to learn to be a scuba diver. - ANS false
The main concern in diving is - ANS equipment malfunction
equipment misuse
hazardous marine life
boats
Your entry-level NAUI scuba diver certification is a "license to " - ANS Learn
©FYNDLAY 1
, ©FYNDLAY 2025 ALL RIGHTS RESERVED
Which of the following physical factors can make you incapable of sustaining the efforts
sometimes demanded when participating in recreational diving? - ANS all of the above
Physical fitness is an important consideration for scuba divers because it helps to prevent diving
accidents due to: - ANS exhaustion
Completing this entry level scuba certification course makes you knowledgeable and skillful
enough to dive safely in or at: - ANS open water with conditions similar to those in which you
were trained
Factors that can affect the breathing ease of a snorkel are: - ANS Length and Diameter
When selecting a face mask, the most important thing to consider is: - ANS Proper seal and
fit
Snorkels over 15 inches in length are not recommended primarily because: - ANS they have
too much dead air space
When buying or renting equipment for diving, the most important consideration is: - ANS its
fit on your body
Diving equipment should be: - ANS rinsed thoroughly, dried and stored in a cool place
Open heel fins are usually the fins of choice for scuba divers because: - ANS they may be
used in a wide variety of enviromental conditions
In the United States, scuba cylinders must be internally inspected every _____ and pressure
tested every _ - ANS 1 year, 5 years
©FYNDLAY 2
, ©FYNDLAY 2025 ALL RIGHTS RESERVED
Scuba tanks should always have some pressure in them to prevent: - ANS moisture from
entering
According to the Department of Transportation regulations, scuba tanks must be hydrostatically
tested every _______ - ANS 5 years
Two types of materials that scuba tanks are made from are steel and _________. -
ANS aluminum
Markings on scuba tanks include: - ANS date of hydrostatic test, serial number, type of
material
When rinsing a regulator it is best to: - ANS leave the regulator attached to the tank or have
the dust cap in place
you should have your regulator serviced by a certified repair technician: - ANS at least once
per year
The stage of the regulator which reduces tank pressure is: - ANS the first stage
The _________ line is the direction of travel line on the compass. - ANS lubber
A _____ calculates your remaining allowable bottom time while diving. - ANS dive computer
A diving watch must be able to withstand pressure and measure _____. - ANS elapsed time
Proper maintenance of instruments includes: - ANS Rinse them in fresh water at the end of
each diving day.
©FYNDLAY 3