OSHA BASIC ORIENTATION 2025 QUESTIONS WITH
SOLUTIONS GUARANTEE A+
✔✔Contractors/Subcontractors (hazcom) - ✔✔employers should notify
contractors/subcontractors about emergency response procedures and other identified
hazards
✔✔Preliminary Survey (hazcom) - ✔✔identification of dangerous conditions that could
pose inhalation or skin absorbson hazards that are IDHL.
✔✔OSH Act 1971 - ✔✔General Duty Clause 5(a)(1)
✔✔NIOSH (National Institute for Occupational Safety and Health) - ✔✔conducts
research on occupational hazards
✔✔How often should medical exams and consultations be conducted? - ✔✔yearly
✔✔OSHA Standards come from: - ✔✔1. Consensus Standars- prepared by
organizations that develop industry-wide standards.
2. Propritary Standards- prepared by professional experts within a particular industry
3. Federal Protection Laws- OSHA now enforce standards issued under early ACT in all
industry where they apply.
✔✔Barrier - ✔✔fence, border, or other obstacle placed between a single piece rim
wheel and an employee during tire inflation to contain the rim wheel component.
✔✔Multi-piece Rim Wheel - ✔✔assemblage of a multi-piece wheel with tire tube and
other components
✔✔Multi-piece Wheel - ✔✔vehcile wheel consisting of 2 or more parts, on of which is a
side or locking ring designed to hold the tire on the wheel by interlocking components
when the tire in inflated.
✔✔Restraining Device - ✔✔apparatus such as a cage, rack, assemblage of bars and
other components that will constrain all rim wheel components during an explosive
seperation of a multi-piece rim wheel, or during the sudden release of the contained air
of a single piece rime wheel
✔✔Rim Manual - ✔✔publication containing instructions from the manufacturer or a
qulaified organization for correct mounting, demounting, maintenance, and safety
precautions peculiar to the type of wheel being serviced.
✔✔Rim Wheel - ✔✔assemblage of tire, tube and liner (where appropriate) and wheel
components
, ✔✔Single-piece rim wheel - ✔✔assemblage of single-piece rim wheel with the tire and
other components
✔✔Single-piece wheel - ✔✔vehcile wheel consisting of one part, desinged to hold the
tire on the wheel when tire is inflated
✔✔Trajectory - ✔✔potential path or route that a rim wheel component may travel during
an explosive seperation, or the sudden release of prssurized air.
✔✔Wheel - ✔✔Portion of a rim wheel that attaches to the axle of a vehicle and also
contains the inflated portion of the assembly.
✔✔"D" Designation Forklift - ✔✔diesel-powered units having minimum acceptable
safeguards against inherent fire hazards
✔✔"E" Designated Forklift - ✔✔electrically powered units that have mimimum
acceptable safetguards against inherent fire hazards
✔✔"G" Designation Forklift - ✔✔gasoline-powered units
✔✔"LP" Designation Forklift - ✔✔Liquified Petroleum gas as fuel
✔✔What designation of forklift may be used on piers/wharves - ✔✔"D", "E", "G", "LP"
✔✔Facilities shall be provided for flushing and neutralizing spilled electrolyte, for fire
protection, for protecting charging apparatus from damage by trucks, and for adequate
ventilation for dispersal of fumes from gassing batteries. - ✔✔True
✔✔Before attempting to change batteries in forklift, what should be done? - ✔✔Trucks
shall be positioned and brake applied
✔✔Industrial Truck operators evaluation must be done how often? - ✔✔every 3 years
✔✔If found during inspection, forklift should be tagged OOS: - ✔✔- ten random broken
wires in one rope lay
- five broken wires in one strand
- wear or scraping of 1/3 original diameter of outside wires
- kinking, crushing, bird caging
- heat related damages
- dame to end attachmetns
- hook throat is opened more than 15% of normal
- hook is twisted more than 10° of normal
- corrosion is detected
SOLUTIONS GUARANTEE A+
✔✔Contractors/Subcontractors (hazcom) - ✔✔employers should notify
contractors/subcontractors about emergency response procedures and other identified
hazards
✔✔Preliminary Survey (hazcom) - ✔✔identification of dangerous conditions that could
pose inhalation or skin absorbson hazards that are IDHL.
✔✔OSH Act 1971 - ✔✔General Duty Clause 5(a)(1)
✔✔NIOSH (National Institute for Occupational Safety and Health) - ✔✔conducts
research on occupational hazards
✔✔How often should medical exams and consultations be conducted? - ✔✔yearly
✔✔OSHA Standards come from: - ✔✔1. Consensus Standars- prepared by
organizations that develop industry-wide standards.
2. Propritary Standards- prepared by professional experts within a particular industry
3. Federal Protection Laws- OSHA now enforce standards issued under early ACT in all
industry where they apply.
✔✔Barrier - ✔✔fence, border, or other obstacle placed between a single piece rim
wheel and an employee during tire inflation to contain the rim wheel component.
✔✔Multi-piece Rim Wheel - ✔✔assemblage of a multi-piece wheel with tire tube and
other components
✔✔Multi-piece Wheel - ✔✔vehcile wheel consisting of 2 or more parts, on of which is a
side or locking ring designed to hold the tire on the wheel by interlocking components
when the tire in inflated.
✔✔Restraining Device - ✔✔apparatus such as a cage, rack, assemblage of bars and
other components that will constrain all rim wheel components during an explosive
seperation of a multi-piece rim wheel, or during the sudden release of the contained air
of a single piece rime wheel
✔✔Rim Manual - ✔✔publication containing instructions from the manufacturer or a
qulaified organization for correct mounting, demounting, maintenance, and safety
precautions peculiar to the type of wheel being serviced.
✔✔Rim Wheel - ✔✔assemblage of tire, tube and liner (where appropriate) and wheel
components
, ✔✔Single-piece rim wheel - ✔✔assemblage of single-piece rim wheel with the tire and
other components
✔✔Single-piece wheel - ✔✔vehcile wheel consisting of one part, desinged to hold the
tire on the wheel when tire is inflated
✔✔Trajectory - ✔✔potential path or route that a rim wheel component may travel during
an explosive seperation, or the sudden release of prssurized air.
✔✔Wheel - ✔✔Portion of a rim wheel that attaches to the axle of a vehicle and also
contains the inflated portion of the assembly.
✔✔"D" Designation Forklift - ✔✔diesel-powered units having minimum acceptable
safeguards against inherent fire hazards
✔✔"E" Designated Forklift - ✔✔electrically powered units that have mimimum
acceptable safetguards against inherent fire hazards
✔✔"G" Designation Forklift - ✔✔gasoline-powered units
✔✔"LP" Designation Forklift - ✔✔Liquified Petroleum gas as fuel
✔✔What designation of forklift may be used on piers/wharves - ✔✔"D", "E", "G", "LP"
✔✔Facilities shall be provided for flushing and neutralizing spilled electrolyte, for fire
protection, for protecting charging apparatus from damage by trucks, and for adequate
ventilation for dispersal of fumes from gassing batteries. - ✔✔True
✔✔Before attempting to change batteries in forklift, what should be done? - ✔✔Trucks
shall be positioned and brake applied
✔✔Industrial Truck operators evaluation must be done how often? - ✔✔every 3 years
✔✔If found during inspection, forklift should be tagged OOS: - ✔✔- ten random broken
wires in one rope lay
- five broken wires in one strand
- wear or scraping of 1/3 original diameter of outside wires
- kinking, crushing, bird caging
- heat related damages
- dame to end attachmetns
- hook throat is opened more than 15% of normal
- hook is twisted more than 10° of normal
- corrosion is detected
