MSSC - MANUFACTURING PROCESSES AND PRODUCTION EXAM
QUESTIONS WITH COMPLETE SOLUTIONS GUARANTEED PASS
BRAND NEW 2025
The three common types of mechanisms are levers, ______,
and inclined planes. - CORRECT ANSWER - >wheels
The metric system expresses force in ______. - CORRECT
ANSWER - >newtons
A spring scale is used to measure ______. - CORRECT ANSWER -
>force
The English unit of measure of weight is the ______. - CORRECT
ANSWER - >pound-force (lb-f)
The Law of Moments can be used to determine ______. -
CORRECT ANSWER - >both the force needed to balance OR
force needed to move a load
Torque can be calculated by multiplying the distance from the
fulcrum and ______. - CORRECT ANSWER - >the force applied
A force that makes an object rotate about a point is called
______. - CORRECT ANSWER - >torque
, A second-class lever has its ______. - CORRECT ANSWER - >load
between the fulcrum and the effort arm
A third-class lever has its ______. - CORRECT ANSWER - >effort
arm between the fulcrum and the load
A(n) ______ is produced when forces applied to a lever cause it
to rotate. - CORRECT ANSWER - >rotational moment
Mechanical advantage is the ratio of the force required to move
a load divided by _____. - CORRECT ANSWER - >the effort force
applied
The mechanical advantage of a third-class lever can be found by
the ratio of the length of the ______ arm divided by the length
of the ______ arm. - CORRECT ANSWER - >effort, resistance
The coefficient of friction is the ratio of the force of friction
divided by the ______. - CORRECT ANSWER - >normal force
Rolling friction is ______. - CORRECT ANSWER - >less than both
static and kinetic friction
What is the unit of measure for the coefficient of friction? -
CORRECT ANSWER - >it has no unit
One application that takes advantage if both high and low
friction is a(n) ______. - CORRECT ANSWER - >belt sander
QUESTIONS WITH COMPLETE SOLUTIONS GUARANTEED PASS
BRAND NEW 2025
The three common types of mechanisms are levers, ______,
and inclined planes. - CORRECT ANSWER - >wheels
The metric system expresses force in ______. - CORRECT
ANSWER - >newtons
A spring scale is used to measure ______. - CORRECT ANSWER -
>force
The English unit of measure of weight is the ______. - CORRECT
ANSWER - >pound-force (lb-f)
The Law of Moments can be used to determine ______. -
CORRECT ANSWER - >both the force needed to balance OR
force needed to move a load
Torque can be calculated by multiplying the distance from the
fulcrum and ______. - CORRECT ANSWER - >the force applied
A force that makes an object rotate about a point is called
______. - CORRECT ANSWER - >torque
, A second-class lever has its ______. - CORRECT ANSWER - >load
between the fulcrum and the effort arm
A third-class lever has its ______. - CORRECT ANSWER - >effort
arm between the fulcrum and the load
A(n) ______ is produced when forces applied to a lever cause it
to rotate. - CORRECT ANSWER - >rotational moment
Mechanical advantage is the ratio of the force required to move
a load divided by _____. - CORRECT ANSWER - >the effort force
applied
The mechanical advantage of a third-class lever can be found by
the ratio of the length of the ______ arm divided by the length
of the ______ arm. - CORRECT ANSWER - >effort, resistance
The coefficient of friction is the ratio of the force of friction
divided by the ______. - CORRECT ANSWER - >normal force
Rolling friction is ______. - CORRECT ANSWER - >less than both
static and kinetic friction
What is the unit of measure for the coefficient of friction? -
CORRECT ANSWER - >it has no unit
One application that takes advantage if both high and low
friction is a(n) ______. - CORRECT ANSWER - >belt sander
