CERTIFIED PLAYGROUND SAFETY INSPECTOR CPSI EXAM QUESTIONS
WITH COMPLETE SOLUTIONS GUARANTEED PASS BRAND NEW 2025
To be compliant with ASTM 1487, a designer or manufacturer
of playground equipment should - - ANSWER - >-provide buyers
with a parts list for the playground
2. The fish or wedge probe is used to determine whether or not
a hazard exists on - - ANSWER - >-a partially bounded opening
3. Which of the following is correct regarding the impact-
attenuation of surfacing material - - ANSWER - >-Critical height
must equal or exceed fall height
4. When evaluating the structural integrity of a support
structure for a swing that appears to be failing, a CPSI should - -
ANSWER - >-hire a licensed professional engineer to certify the
integrity of the equipment
5. Manufacturers of playground equipment must: provide the
manufacturer's identification of the equipment - - ANSWER - >-
6. The majority of injuries associated with playground
equipment result from - - ANSWER - >-falls to the surface on
which the equipment was located
, 7. An opening may present a common crush or shear hazard
only if it - - ANSWER - >-grabs the 5/8" (16mm) dowel
8. The criteria for unitary surface materials includes meeting
requirements of - - ANSWER - >-ASTM F1292 and F1487
9. Regarding playground safety signage, which of the following
is correct - - ANSWER - >-Signage may not prevent accidents but
may reduce liability
10. Which of the following factors is MOST important when
determining the frequency of inspections of surfacing - -
ANSWER - >-Type of surfacing and amount of use
11. When planning a playground for public use, the play
equipment that is chosen must - - ANSWER - >-be appropriate
for the age of intended users
12. A spring rocker with seat height of 26" is about to be
installed adjacent to the side of a fully enclosed bucket swing
set. The minimum distance required between the swing set and
the rocker is - - ANSWER - >-108" or 9'
13. The Site History File for a playground should contains - -
ANSWER - >-a comprehensive inventory of all equipment, a
parts list, maintenance, and inspection recommendations
WITH COMPLETE SOLUTIONS GUARANTEED PASS BRAND NEW 2025
To be compliant with ASTM 1487, a designer or manufacturer
of playground equipment should - - ANSWER - >-provide buyers
with a parts list for the playground
2. The fish or wedge probe is used to determine whether or not
a hazard exists on - - ANSWER - >-a partially bounded opening
3. Which of the following is correct regarding the impact-
attenuation of surfacing material - - ANSWER - >-Critical height
must equal or exceed fall height
4. When evaluating the structural integrity of a support
structure for a swing that appears to be failing, a CPSI should - -
ANSWER - >-hire a licensed professional engineer to certify the
integrity of the equipment
5. Manufacturers of playground equipment must: provide the
manufacturer's identification of the equipment - - ANSWER - >-
6. The majority of injuries associated with playground
equipment result from - - ANSWER - >-falls to the surface on
which the equipment was located
, 7. An opening may present a common crush or shear hazard
only if it - - ANSWER - >-grabs the 5/8" (16mm) dowel
8. The criteria for unitary surface materials includes meeting
requirements of - - ANSWER - >-ASTM F1292 and F1487
9. Regarding playground safety signage, which of the following
is correct - - ANSWER - >-Signage may not prevent accidents but
may reduce liability
10. Which of the following factors is MOST important when
determining the frequency of inspections of surfacing - -
ANSWER - >-Type of surfacing and amount of use
11. When planning a playground for public use, the play
equipment that is chosen must - - ANSWER - >-be appropriate
for the age of intended users
12. A spring rocker with seat height of 26" is about to be
installed adjacent to the side of a fully enclosed bucket swing
set. The minimum distance required between the swing set and
the rocker is - - ANSWER - >-108" or 9'
13. The Site History File for a playground should contains - -
ANSWER - >-a comprehensive inventory of all equipment, a
parts list, maintenance, and inspection recommendations
