Ag Mech: MSSC Test
EPA - Environmental Protection Agency - ANSWER-works to ensure that: Americans have clean air,
land, and water
OSHA - The Occupational Safety and Health Administration - ANSWER-to ensure safe and healthful
working conditions
Standard operating procedures (SOPs) - ANSWER-detailed documents that explain each step in a work
process
Diluted bleach - ANSWER-can be used to neutralize most blood pathogens.
Working in an atmosphere with less than 19.5% oxygen can cause - ANSWER-disorientation.
Oxidizers - ANSWER-are chemicals that fuel the combustion of other materials (Oxygen promotes
burning/combustion)
The SDS (Safety Data Sheet) provides - ANSWER-information about proper handling, storage, PPE, and
disposal of each chemical.
The 8-hour HAZMAT - ANSWER-is a refresher training course that is required annually.
The NPCA and NFPA is the color code system that designates the following: - ANSWER-Blue = health,
Red = fire, Orange/Yellow = reactivity, White = information
The HMIS label used to indicate - ANSWER-chemicals that pose a chronic health risk is an Asterisk.
First in/First out is a system that - ANSWER-rotates chemical stock to ensure they are used within
their shelf life.
A worker should not unload a truck if they do not understand a - ANSWER-placard on the truck.
A worker should immediately lock out a machine if - ANSWER-he or she finds the guard has been
bypassed.
A holdback restraint is - ANSWER-a type of safety barrier that prevents an operator's arms from
entering the machine during operation.
After a shift change, a machine remains locked out. Who can remove the lockout lock? - ANSWER-Any
employee that has permission from the lock's owner to remove it.)
The correct procedural order for performing a lockout/tagout is - ANSWER-Hasp, Lock, Tag. (in that
order)
When two or more people need to service a machine, who is responsible for performing the
lockout/tagout? - ANSWER-Each person supplies their own lock to the hasp.
It is NEVER okay to alter a hand tool. - ANSWER-True
The 3 prongs of a 110-volt power tool cord each perform what purpose? - ANSWER-One is hot, one is
the neutral, and one is the ground.
EPA - Environmental Protection Agency - ANSWER-works to ensure that: Americans have clean air,
land, and water
OSHA - The Occupational Safety and Health Administration - ANSWER-to ensure safe and healthful
working conditions
Standard operating procedures (SOPs) - ANSWER-detailed documents that explain each step in a work
process
Diluted bleach - ANSWER-can be used to neutralize most blood pathogens.
Working in an atmosphere with less than 19.5% oxygen can cause - ANSWER-disorientation.
Oxidizers - ANSWER-are chemicals that fuel the combustion of other materials (Oxygen promotes
burning/combustion)
The SDS (Safety Data Sheet) provides - ANSWER-information about proper handling, storage, PPE, and
disposal of each chemical.
The 8-hour HAZMAT - ANSWER-is a refresher training course that is required annually.
The NPCA and NFPA is the color code system that designates the following: - ANSWER-Blue = health,
Red = fire, Orange/Yellow = reactivity, White = information
The HMIS label used to indicate - ANSWER-chemicals that pose a chronic health risk is an Asterisk.
First in/First out is a system that - ANSWER-rotates chemical stock to ensure they are used within
their shelf life.
A worker should not unload a truck if they do not understand a - ANSWER-placard on the truck.
A worker should immediately lock out a machine if - ANSWER-he or she finds the guard has been
bypassed.
A holdback restraint is - ANSWER-a type of safety barrier that prevents an operator's arms from
entering the machine during operation.
After a shift change, a machine remains locked out. Who can remove the lockout lock? - ANSWER-Any
employee that has permission from the lock's owner to remove it.)
The correct procedural order for performing a lockout/tagout is - ANSWER-Hasp, Lock, Tag. (in that
order)
When two or more people need to service a machine, who is responsible for performing the
lockout/tagout? - ANSWER-Each person supplies their own lock to the hasp.
It is NEVER okay to alter a hand tool. - ANSWER-True
The 3 prongs of a 110-volt power tool cord each perform what purpose? - ANSWER-One is hot, one is
the neutral, and one is the ground.
