NEIEP ELEVATOR 245-250 EXAM
QUESTIONS AND ANSWERS ALL
ACCURATELY ANSWERED
What should be done before starting any roping operation at the designated
landing? - CORRECT_ANSWER_The building needs to be protected so place
Masonite/ plywood around the door frame, and building floors
What are key factors that should be explained to customers before starting any
roping operations? - CORRECT_ANSWER_The amount of space needed for
storage: the amount of space needed around the openings where the work will be
performed
Where are the shackles attached on a 2:1 roping? - CORRECT_ANSWER_To a
dead-end hitch plate that are secured at the top of the hoist way
Where are the shackles attached on a 1:1 roping? - CORRECT_ANSWER_To the
counterweight frame and to the crosshead on the car top
,What must be done if you anticipate using any type of welding during roping
operations? - CORRECT_ANSWER_A fire permit may be required; fire
extinguishers and fire watch; and protect systems from heat and smoke
During the inspection of elevator that has not yet been turned over to the
customer a damaged rope is discovered what must be done? -
CORRECT_ANSWER_Only the damaged rope must be replaced
Which ropes are more likely to have internal failures? -
CORRECT_ANSWER_Governor/ compensating ropes due to the lighter loads and
the smaller drive sheaves
According to code what is required on governors? - CORRECT_ANSWER_The
governor rope tag must be attached to the governor rope fastening
What is the 2nd purpose of lubricating ropes? - CORRECT_ANSWER_To prevent
friction and locking between the wires and strands within the rope
, What is 1st purpose of lubricating ropes? - CORRECT_ANSWER_To protect the
rope core from deteriorating
Where should the car be located to inspect a traction machine with 1:1 roping? -
CORRECT_ANSWER_At the top of the hoist way to allow the ropes to be examined
from the car top on the counterweight side
Where do need to be to inspect a drum machine? - CORRECT_ANSWER_In the
overhead machine space
How far should the car be moved between each stop when you're inspecting the
ropes? - CORRECT_ANSWER_2-3 feet and examine each rope at each stop
What should be done to inspect an excessively dirt or overlubricated ropes? -
CORRECT_ANSWER_The rope must be cleaned/ remove the excess lubrication
Where are the shackles attached on 2:1 roping? - CORRECT_ANSWER_To dead
end hitch plates at the top of the hoist way
QUESTIONS AND ANSWERS ALL
ACCURATELY ANSWERED
What should be done before starting any roping operation at the designated
landing? - CORRECT_ANSWER_The building needs to be protected so place
Masonite/ plywood around the door frame, and building floors
What are key factors that should be explained to customers before starting any
roping operations? - CORRECT_ANSWER_The amount of space needed for
storage: the amount of space needed around the openings where the work will be
performed
Where are the shackles attached on a 2:1 roping? - CORRECT_ANSWER_To a
dead-end hitch plate that are secured at the top of the hoist way
Where are the shackles attached on a 1:1 roping? - CORRECT_ANSWER_To the
counterweight frame and to the crosshead on the car top
,What must be done if you anticipate using any type of welding during roping
operations? - CORRECT_ANSWER_A fire permit may be required; fire
extinguishers and fire watch; and protect systems from heat and smoke
During the inspection of elevator that has not yet been turned over to the
customer a damaged rope is discovered what must be done? -
CORRECT_ANSWER_Only the damaged rope must be replaced
Which ropes are more likely to have internal failures? -
CORRECT_ANSWER_Governor/ compensating ropes due to the lighter loads and
the smaller drive sheaves
According to code what is required on governors? - CORRECT_ANSWER_The
governor rope tag must be attached to the governor rope fastening
What is the 2nd purpose of lubricating ropes? - CORRECT_ANSWER_To prevent
friction and locking between the wires and strands within the rope
, What is 1st purpose of lubricating ropes? - CORRECT_ANSWER_To protect the
rope core from deteriorating
Where should the car be located to inspect a traction machine with 1:1 roping? -
CORRECT_ANSWER_At the top of the hoist way to allow the ropes to be examined
from the car top on the counterweight side
Where do need to be to inspect a drum machine? - CORRECT_ANSWER_In the
overhead machine space
How far should the car be moved between each stop when you're inspecting the
ropes? - CORRECT_ANSWER_2-3 feet and examine each rope at each stop
What should be done to inspect an excessively dirt or overlubricated ropes? -
CORRECT_ANSWER_The rope must be cleaned/ remove the excess lubrication
Where are the shackles attached on 2:1 roping? - CORRECT_ANSWER_To dead
end hitch plates at the top of the hoist way
