FAA Part 107 Questions and Answers Latest Update with Verified Solutions

FAA Part 107 Questions and Answers Latest Update with Verified Solutions What should a remote pilot do before each flight to ensure safe operation? A. Perform a preflight inspection of the drone and controller B. Calibrate the drone once per month C. Only check the battery level D. Rely on previous flights to determine readiness What is the minimum visibility required for drone operations under Part 107? A. 1 mile B. 2 miles C. 3 miles D. 5 miles What is the required cloud clearance for drone operations under Part 107? A. 500 feet below and 2,000 feet horizontally from clouds B. 100 feet below and 500 feet horizontally C. 1,000 feet below and 1,000 feet horizontally 2 D. No cloud clearance is required What is the primary purpose of the FAA's B4UFLY app? A. To check airspace restrictions and flight advisories before flying B. To control the drone remotely C. To track drone flight time D. To file a flight plan with the FAA What should a remote pilot do if their drone starts to experience unexpected high wind conditions mid-flight? A. Increase altitude to escape the wind B. Descend and land as soon as safely possible C. Switch to automatic mode and continue flying D. Turn off the controller to reset the system What is the primary purpose of a drone’s return-to-home (RTH) function? A. To help the pilot land manually B. To automatically return the drone to its launch location if the signal is lost 3 C. To increase battery life D. To improve GPS signal strength What is an important safety step before flying a drone near water? A. Reduce altitude for better control B. Ensure wind conditions are stable and monitor battery life closely C. Fly faster to reduce the chance of crashing D. Only fly with a spotter What should a remote pilot do if a drone starts descending uncontrollably? A. Increase throttle immediately B. Turn off the motors mid-air C. Try to guide the drone to a safe landing location D. Switch to GPS mode What must a remote pilot do before flying in Class B, C, D, or E controlled airspace? A. Obtain FAA authorization through LAANC or FAA DroneZone B. Notify the nearest airport within 24 hours 4 C. Contact air traffic control via radio D. File a paper request with the FAA What is the most effective way to prevent signal interference while flying a drone? A. Avoid flying near power lines, large metal structures, or crowded wireless areas B. Fly at a higher altitude to strengthen the signal C. Use a lower transmission power setting D. Only fly in urban areas where signals are strongest What should a remote pilot do if