QUESTIONS AND CORRECT
ANSWERS
Employee Involvement in Process Safety Management ✅✅ CORRECT ANSW-Employees must be
trained and informed so they know how to prevent exposure to, or protect themselves from, the
hazards of chemicals.
Process Safety Information ✅✅ CORRECT ANSW-The employer must compile complete and
accurate written information concerning process chemicals, process technology, and process
equipment. This is essential to an effective process safety management program and to process
hazard analysis (PHA).
PHA ✅✅ CORRECT ANSW-Process Hazard Analysis
Process Hazard Analysis (PHA) ✅✅ CORRECT ANSW-This is an evaluation of the potential hazards
of a process or job and is one of the most important elements of a successful process safety
management program. A designated team works together to perform a PHA.
Operating Procedures and Practices ✅✅ CORRECT ANSW-Operating procedures tell you how to
safely perform a job. It tells the data to be recorded, operating conditions to be maintained, samples
to be collected and evaluated, and the safety and health precautions that must be taken all the time.
OSHA ✅✅ CORRECT ANSW-Occupational Safety and Health Administration
four essential elements to recognizing hazards and reducing and/or eliminating the workplace
hazards: ✅✅ CORRECT ANSW--Management Commitment and Employee Involvement
-Worksite Analysis
-Hazard Prevention and Control
-Safety and Health Training
PSM ✅✅ CORRECT ANSW-Process Safety Management
The primary goal of the Process Safety Management of highly hazardous chemicals is: ✅✅
CORRECT ANSW-to prevent unwanted releases of hazardous chemicals.
, MPH ✅✅ CORRECT ANSW-Major Process Hazards
There are _____ Basic Elements of Process Safety Management. ✅✅ CORRECT ANSW-14
Employee Training ✅✅ CORRECT ANSW-All employees, including maintenance and contractor
employees who could be impacted by the hazards of chemicals must be trained so that they know
the hazards and how to protect themselves, their fellow employees and the citizens of nearby
communities.
Contractors ✅✅ CORRECT ANSW-Employees must be hired who can accomplish their job tasks
without compromising the safety and health of that employee or others.
Pre-Startup Safety ✅✅ CORRECT ANSW-All important elements such as start-up, shut-down and
operating procedures, including emergency procedures must be in place and the operating staff
trained before a startup. The development of P&IDs (Piping & Instrument Diagrams) must be
available prior to startup for training assistance.
Mechanical Integrity ✅✅ CORRECT ANSW-An employer must operate and maintain the process
in a safe manner and process equipment as designed in order to ensure safety. Equipment needs to
be replaced when it is worn out.
Work Permits ✅✅ CORRECT ANSW-It is also important that non-routine work be well
communicated, not only to those who will do the work, but to any persons that could be affected by
the work. WORK PERMITS give authorization to workers to do special tasks only after many things
are in place that can ensure the safety of that work.
Non-routine work... ✅✅ CORRECT ANSW-canNOT be done without a signed, written permit that
has all the special precautions addressed within it.
Examples of some of the different types of work permits or procedures you may need for your job
are ✅✅ CORRECT ANSW-Line Breaking Procedures
Lockout/Tagout Procedures
Cold Work Permits
Hot Work Permits