Cleet Phase 4
A shooter's trigger finger is also known as the - ANS -Primary safety
Before a shooter fires a round, he or she must have - ANS -positive target identification
Before a shooter enters the firing range, four (4) basic premises must be met. The shooter must
(1) be in sound mental and physical condition; (2) have fresh and safe ammunition; (3) have a
holster that is in good condition and designed specifically for the firearm; and (4) have - ANS -a
firearm that is of sound design, and well maintained
The top priority of all participants in firearms training is - ANS -safety
All firearms should be treated as if - ANS -they are loaded
The proper method of unloading what type of firearm involves opening the cylinder; ejecting
cartridges into your hand; physically and visually checking the chambers to insure that each is
empty ; and counting the rounds in your hand to insure that they are all accounted for? - ANS
-Revolver
You can presume a firearm is unloaded if - ANS -you check it and confirm it is unloaded
When will you load a firearm while on the range? - ANS -After you have taken position on the
firing line and the command to load has been given by the tower operator
Never place your finger on the trigger until - ANS -The muzzle has been cleared, is pointing
down range, and the target has been identified
Once in the ready gun position, the shooter's trigger finger should be located - ANS -Outside
the trigger guard
In the event of a malfunction in a semi-automatic pistol, you should - ANS -perform the proper
malfunction clearance procedure and continue firing
Never fire a succeeding round following a squib load until - ANS -the barrel has been checked
for obstructions by a line officer
What is the failure of a primer to ignite the powder charge? - ANS -Misfire
What is the temporary failure of a primer to ignite the powder charge? - ANS -Hangfire
, What is a cartridge that is loaded with an insufficient amount of powder? - ANS -Squib load
Anyone who observes an immediately hazardous situation on the firing line should - ANS -Call
out "cease fire"
In the event of an emergency "cease fire", all shooters will stop firing, ... - ANS -Holster and
secure their firearm, and await further instructions
If you are spoken to by a line officer while on the firing line, you should - ANS -Maintain your
position and listen, but do not turn around
To transfer what type of firearm should you open and unload the cylinder and present it grip first
with the muzzle pointing to the ground? - ANS -The revolver
To transfer what type of firearm should you remove the magazine, unload the chamber, lock the
slide open, and present it grip first with the muzzle pointing to the ground? - ANS
-semi-automatic pistol
During firearms training, if any equipment is dropped during a course of fire, make sure - ANS
-the muzzle is pointed straight down range, then wave your off gun hand and get permission
from a line officer to assist you
If a firearm is dropped, you should - ANS -raise your off-fun hand and wait for the line officer to
assist you
23. Students are required to wear eye and ear protection - ANS -anytime they are on or near
the firing line
24. Firearms and ammunition should be stored - ANS -separately or in separate locked
compartments
25. When storing a semi-automatic pistol, the magazine should be - ANS -removed from the
firearm and unloaded
26. The enclosure over the underside of the frame is called? - ANS -trigger guard
27. An emergency reload is called what? - ANS -speed load
28. In an administrative unload you remove the magazine... - ANS -with pistol holstered
Treat all firearms as if they were? - ANS -loaded
Firearm safety begins with? - ANS -Are you in sound, physical, and mental condition?
A shooter's trigger finger is also known as the - ANS -Primary safety
Before a shooter fires a round, he or she must have - ANS -positive target identification
Before a shooter enters the firing range, four (4) basic premises must be met. The shooter must
(1) be in sound mental and physical condition; (2) have fresh and safe ammunition; (3) have a
holster that is in good condition and designed specifically for the firearm; and (4) have - ANS -a
firearm that is of sound design, and well maintained
The top priority of all participants in firearms training is - ANS -safety
All firearms should be treated as if - ANS -they are loaded
The proper method of unloading what type of firearm involves opening the cylinder; ejecting
cartridges into your hand; physically and visually checking the chambers to insure that each is
empty ; and counting the rounds in your hand to insure that they are all accounted for? - ANS
-Revolver
You can presume a firearm is unloaded if - ANS -you check it and confirm it is unloaded
When will you load a firearm while on the range? - ANS -After you have taken position on the
firing line and the command to load has been given by the tower operator
Never place your finger on the trigger until - ANS -The muzzle has been cleared, is pointing
down range, and the target has been identified
Once in the ready gun position, the shooter's trigger finger should be located - ANS -Outside
the trigger guard
In the event of a malfunction in a semi-automatic pistol, you should - ANS -perform the proper
malfunction clearance procedure and continue firing
Never fire a succeeding round following a squib load until - ANS -the barrel has been checked
for obstructions by a line officer
What is the failure of a primer to ignite the powder charge? - ANS -Misfire
What is the temporary failure of a primer to ignite the powder charge? - ANS -Hangfire
, What is a cartridge that is loaded with an insufficient amount of powder? - ANS -Squib load
Anyone who observes an immediately hazardous situation on the firing line should - ANS -Call
out "cease fire"
In the event of an emergency "cease fire", all shooters will stop firing, ... - ANS -Holster and
secure their firearm, and await further instructions
If you are spoken to by a line officer while on the firing line, you should - ANS -Maintain your
position and listen, but do not turn around
To transfer what type of firearm should you open and unload the cylinder and present it grip first
with the muzzle pointing to the ground? - ANS -The revolver
To transfer what type of firearm should you remove the magazine, unload the chamber, lock the
slide open, and present it grip first with the muzzle pointing to the ground? - ANS
-semi-automatic pistol
During firearms training, if any equipment is dropped during a course of fire, make sure - ANS
-the muzzle is pointed straight down range, then wave your off gun hand and get permission
from a line officer to assist you
If a firearm is dropped, you should - ANS -raise your off-fun hand and wait for the line officer to
assist you
23. Students are required to wear eye and ear protection - ANS -anytime they are on or near
the firing line
24. Firearms and ammunition should be stored - ANS -separately or in separate locked
compartments
25. When storing a semi-automatic pistol, the magazine should be - ANS -removed from the
firearm and unloaded
26. The enclosure over the underside of the frame is called? - ANS -trigger guard
27. An emergency reload is called what? - ANS -speed load
28. In an administrative unload you remove the magazine... - ANS -with pistol holstered
Treat all firearms as if they were? - ANS -loaded
Firearm safety begins with? - ANS -Are you in sound, physical, and mental condition?
