BoilerMaker Maintenance NCCER
At what angle is a chain fall usually used? << correct answer>> Vertical
Pipeline PNID ask for what size the main line is << correct answer>> 12"
What does the PNID ask for material << correct answer>> A-335
When attaching two pipes together what fitting is used? << correct answer>> Coupling
When attaching two different pipe sizes together what fitting is used? << correct answer>>
Bushing
What is a tigger? << correct answer>> Winch
What controls water in the towers? << correct answer>> (Distributors) internally installed
above a packed bed. Which performs the job in providing a finite liquid distribution over
the packed bed.
What is the minimum rated tie off point? << correct answer>> 5,000lbs
What causes a kink in a wire sling? << correct answer>> Sling against a support/structure
Where is the flame arrester located? << correct answer>> At the handle
All of the following are examples of the internal many hardware except? << correct answer>>
Slide fastener
The fitting that makes it easy to disassemble threaded pipe is? << correct answer>> Union
What is the purpose of a gasket? << correct answer>> To create a seal between two
stationary parts
What is the first consideration when making a gasket? << correct answer>> Material
compatibility
Ring gaskets may be effected by all of the following except? << correct answer>> Number of
bolts
Which way should the teeth face on the hacksaw blade? << correct answer>> Away from
handle
The pressure of 1" and 10" pipe when both are 20' tall? << correct answer>> The pressure is
both the same
At what angle is a chain fall usually used? << correct answer>> Vertical
Pipeline PNID ask for what size the main line is << correct answer>> 12"
What does the PNID ask for material << correct answer>> A-335
When attaching two pipes together what fitting is used? << correct answer>> Coupling
When attaching two different pipe sizes together what fitting is used? << correct answer>>
Bushing
What is a tigger? << correct answer>> Winch
What controls water in the towers? << correct answer>> (Distributors) internally installed
above a packed bed. Which performs the job in providing a finite liquid distribution over
the packed bed.
What is the minimum rated tie off point? << correct answer>> 5,000lbs
What causes a kink in a wire sling? << correct answer>> Sling against a support/structure
Where is the flame arrester located? << correct answer>> At the handle
All of the following are examples of the internal many hardware except? << correct answer>>
Slide fastener
The fitting that makes it easy to disassemble threaded pipe is? << correct answer>> Union
What is the purpose of a gasket? << correct answer>> To create a seal between two
stationary parts
What is the first consideration when making a gasket? << correct answer>> Material
compatibility
Ring gaskets may be effected by all of the following except? << correct answer>> Number of
bolts
Which way should the teeth face on the hacksaw blade? << correct answer>> Away from
handle
The pressure of 1" and 10" pipe when both are 20' tall? << correct answer>> The pressure is
both the same
