CALIFORNIA UST SERVICE TECHNICIAN PART 2 QUESTIONS AND ACCURATE
ANSWERS 2024/2025 | VERIFIED
when an automatic tank gauge is utilized for singlewall Tank leak detection it shall generate A post test
hard copy data report of the following information EXCEPT: - ✔️✔️Outside air temperature.
Approved cathodic protection methods include? - ✔️✔️Sacrificial anodes
Impressed current systems
Cathodic protection systems must be inspected by a certified cathodic protection tester within ___
months of installation - ✔️✔️6
UST include the following? - ✔️✔️500 gallon waste oil
Motor vehicle fuel tanks include the following EXCEPT: - ✔️✔️Waste oil tanks
Enhanced line leak detection test methods must be capable of detecting a leak rate of at least? -
✔️✔️.005 gph
The following are approved method of release detection for singlewall tanks EXCEPT: - ✔️✔️Interstitial
monitoring
Single walled suction pipng shall be tested at least every___ years ? - ✔️✔️3 years
Pressured product piping with secondary containment must be subject to an annual pressure test must
be tested with the method capable of detecting a ? - ✔️✔️.1 gph release
Persons performingThe annual monitoring certification must possess the following - ✔️✔️Monitoring
equipment manufacturer certification.
Overfill protection is designed to prevent the tank from being over filled during product delivery by.? -
✔️✔️restricting product flow.
Triggering and audible and visual alarm.
ANSWERS 2024/2025 | VERIFIED
when an automatic tank gauge is utilized for singlewall Tank leak detection it shall generate A post test
hard copy data report of the following information EXCEPT: - ✔️✔️Outside air temperature.
Approved cathodic protection methods include? - ✔️✔️Sacrificial anodes
Impressed current systems
Cathodic protection systems must be inspected by a certified cathodic protection tester within ___
months of installation - ✔️✔️6
UST include the following? - ✔️✔️500 gallon waste oil
Motor vehicle fuel tanks include the following EXCEPT: - ✔️✔️Waste oil tanks
Enhanced line leak detection test methods must be capable of detecting a leak rate of at least? -
✔️✔️.005 gph
The following are approved method of release detection for singlewall tanks EXCEPT: - ✔️✔️Interstitial
monitoring
Single walled suction pipng shall be tested at least every___ years ? - ✔️✔️3 years
Pressured product piping with secondary containment must be subject to an annual pressure test must
be tested with the method capable of detecting a ? - ✔️✔️.1 gph release
Persons performingThe annual monitoring certification must possess the following - ✔️✔️Monitoring
equipment manufacturer certification.
Overfill protection is designed to prevent the tank from being over filled during product delivery by.? -
✔️✔️restricting product flow.
Triggering and audible and visual alarm.
