ACTUAL Exam Questions and CORRECT
Answers
The 2 main considerations concerning the existing cabling are? - CORRECT ANSWER -
Grandfathered system
Abandoned cable 11-25
The type of cutover where cross-connects are relocated one pair after another until completed is
called a - CORRECT ANSWER - rolling cut 11-28
Which practice involves moving the customer to a temporary office space until their section of
the retrofit is completed and then moving them back to their recabled office space? - CORRECT
ANSWER - Swing space phasing
Which of these testers would you clamp around a strand of fiber to check for the presence of
light? - CORRECT ANSWER - Fiber strand identifier 11-11
A ______ provides a quick graphical representation of how the circuit is layed out? - CORRECT
ANSWER - CLR 11-27
A ______ uses several pluggable modules to locate and Identify cables. - CORRECT
ANSWER - Office locator kit
A _________ injects light (at a proper wavelength) and measures the results t the other end. -
CORRECT ANSWER - Light source and power meter
A ________ detects the presence of light within a fiber strand - CORRECT ANSWER -
Fiber strand identifier
, A _______ uses a laser to identify fiber strands and find breaks in the fiber at the near end. -
CORRECT ANSWER - Visual fault locator
A________ will leave the customer momentarily without communications - CORRECT
ANSWER - Hot-cut 11-28
During a _______, cross-connects are relocated one pair after another until completed. -
CORRECT ANSWER - Rolling cut
*_________ is a property of an electromagnetic field built around a conductor that opposes any
changes in current flow in a circuit. - CORRECT ANSWER - Inductance
____________ is a property of conductors that allows storage of electrical charges when
potential differences (voltages) exist between the conductors. - CORRECT ANSWER -
Capacitance
*In AC circuits, the total opposition to current flow is called _________, which is measured in
ohms. - CORRECT ANSWER - Impedance
The nominal characteristic impedance of balanced twisted pair cable is _______ ohms at 100
MHz - CORRECT ANSWER - 100
Pair 626 would be in the __________ Super Binder - CORRECT ANSWER - Red
Series ______ is the preferred choice for longer runs - CORRECT ANSWER - 11
The _________ connector/s have center pins (choose all that apply) - CORRECT
ANSWER -N
BNC