OSHA Quiz (2) Walking and Working Surfaces and Fall Protection Questions and Answers | Latest Version | 2024/2025 | Correct & Verified

OSHA Quiz (2) Walking and Working Surfaces and Fall Protection Questions and Answers | Latest Version | 2024/2025 | Correct & Verified What should be done if a guardrail is loose? Report it and do not use the area until repaired. Why is it important to use fall protection on aerial lifts? To prevent workers from falling out. What must be in place when working near a roof edge? Guardrails, warning lines, or a fall arrest system. Why should workers check weather conditions before working at heights? Wind and rain can increase fall risks. What is the best way to carry tools while climbing a ladder? Use a tool belt or hoist instead of carrying them by hand. 2 Why should workers not jump off ladders or scaffolds? It increases the risk of falls and injuries. What must be in place when working over dangerous machinery? Guardrails or fall protection systems. What should workers do if they see an unsafe work surface? Report it immediately to prevent accidents. Why should fall protection harnesses fit properly? A poor fit can reduce effectiveness and increase injury risk. What should be checked before using a full-body harness? Straps, buckles, and attachment points. Why must ladders never be placed on unstable surfaces? They can shift or tip over. 3 What must be done before using a scaffold for the first time? Ensure it is inspected and properly set up. What is the main purpose of fall protection? To prevent injuries and fatalities from falls. At what height must fall protection be provided in general industry? Four feet above a lower level. At what height must fall protection be provided in construction? Six feet above a lower level. Why are guardrails important on elevated work surfaces? They prevent workers from falling. What should workers do if a guardrail is missing or damaged? Report it and do not use the area until fixed. 4 Why must ladders be placed on a stable surface? To prevent them from slipping or tipping over. What must be done before using a scaffold? Inspect it for stability and defects. Why should stairways be kept free of clutter? To prevent trips and falls. What is the main hazard of an unprotected floor opening?