FDNYC G60 PRACTICE TEST FULLY SOLVED #2
Sprinkler system must NOT be shut off or impaired while hot work is performed - correct
answer Place damp cloth guards on individual sprinkler heads
The person conducting the fire watch ______ have other duties - correct answer
CANNOT
A portable fire extinguisher with a rating of _________ is required and should be within
____ feet travel distance hot work area - correct answer 2-A:20-B:C///30
For ROOFING OPERATIONS, a portable fire extinguisher with a minimum rating of
______ is required - correct answer 3-A:40-B:C
Fire watch on floors below is ______ - correct answer required
The fire watch must continue for a minimum of ____ minutes after the hot work is done -
correct answer 30
For any CNG or LPG torch operations, the first inspection shall be conducted ___
minutes after completion. The second inspection shall be conducted _______ after
completion of torch operations. - correct answer 30 min///1 hour
The fire guard or fire watch personnel must complete a signed inspection report and it
must be submitted to and retained by the person in charge of the torch operations. -
correct answer The report must be made available and maintained on the premises for
a minimum of 48 hours after the work is complete.
Most common fuel gasses used in blowtorches are ______ - correct answer LPG
(butane, propane) natural gas (methane) (either CNG or piped natural gasses)
Soldering and brazing temperatures are typically______ - correct answer 840 degrees F
Oxy-acetylene generates the highest temperature which can reach up to _____ - correct
answer 6000 degrees F
Gas torches can exceed _________ and are used for burning weeds, melting ice, or
applying tar to a roof - correct answer 2000 degrees F
If the torch operation is to stop for a period of _________________, the torch vale must
be closed and the gas supply to the torch must be completely shut - correct answer 1
hour or more
Containers, valves, regulators, hose and other apparatus and fittings for oxygen must
be kept free of __________. - correct answer oil or grease
Sprinkler system must NOT be shut off or impaired while hot work is performed - correct
answer Place damp cloth guards on individual sprinkler heads
The person conducting the fire watch ______ have other duties - correct answer
CANNOT
A portable fire extinguisher with a rating of _________ is required and should be within
____ feet travel distance hot work area - correct answer 2-A:20-B:C///30
For ROOFING OPERATIONS, a portable fire extinguisher with a minimum rating of
______ is required - correct answer 3-A:40-B:C
Fire watch on floors below is ______ - correct answer required
The fire watch must continue for a minimum of ____ minutes after the hot work is done -
correct answer 30
For any CNG or LPG torch operations, the first inspection shall be conducted ___
minutes after completion. The second inspection shall be conducted _______ after
completion of torch operations. - correct answer 30 min///1 hour
The fire guard or fire watch personnel must complete a signed inspection report and it
must be submitted to and retained by the person in charge of the torch operations. -
correct answer The report must be made available and maintained on the premises for
a minimum of 48 hours after the work is complete.
Most common fuel gasses used in blowtorches are ______ - correct answer LPG
(butane, propane) natural gas (methane) (either CNG or piped natural gasses)
Soldering and brazing temperatures are typically______ - correct answer 840 degrees F
Oxy-acetylene generates the highest temperature which can reach up to _____ - correct
answer 6000 degrees F
Gas torches can exceed _________ and are used for burning weeds, melting ice, or
applying tar to a roof - correct answer 2000 degrees F
If the torch operation is to stop for a period of _________________, the torch vale must
be closed and the gas supply to the torch must be completely shut - correct answer 1
hour or more
Containers, valves, regulators, hose and other apparatus and fittings for oxygen must
be kept free of __________. - correct answer oil or grease
