NETWORK SECURITY ESSENTIALS
QUESTIONS AND ANSWERS 100%
CORRECT
What are the three components of the WatchGuard System Manager software? *
A) Policy Manager, Firebox System Manager (FSM), Management Server
B) Policy Manager, HostWatch, Dimension
C) Policy Manager, Firebox System Manager (FSM), HostWatch
D) Policy Manager, Report Server, Management Server - ANSWER-C
Which of the following do you need to ensure you have when initially activating your
firewall? Choose all that apply. *
A) Firebox Serial Number
B) Feature Key
C) Account on the WatchGuard website
D) Device firmware version - ANSWER-A, C
Which account do you need to log into your WatchGuard firewall through WatchGuard
System Manager? *
A) Admin
B) Readonly
C) Status
D) Config - ANSWER-C
True or False: A Feature Key can be migrated between devices. *
True
False - ANSWER-False
A Feature Key is specific to a specific device, because it is based on the serial number.
What are the four types of network interfaces you can configure on your firewall? *
A) External, Trusted, Optional, Custom
B) Trusted, Primary, Optional, DHCP
C) External, Optional, Trusted, Optional
D) Optional, Trusted, Custom, Internet - ANSWER-A
True or False: There are three modes you can operate your firewall under: Mixed
Routing, Bridged and Drop-In. Bridged mode is the default selection. *
True
False - ANSWER-False.
Mixed Routing mode is the default mode.
, What can you view directly through Firebox System Manager? Select all that apply. *
A) Gateway Wireless Controller
B) Log Server
C) Traffic Monitor
D) Service Watch - ANSWER-A, C, D
True or False: Through Firebox System Manager, you can run the TCP Dump
command. *
True
False - ANSWER-True.
This option is available under the Diagnostic Tasks tool.
True or False: Policy precedence is most often determined by the alphabetical order of
policy names. *
True
False - ANSWER-False.
Policy precedence is determined by how specific the policy is in regards to what traffic is
allowed.
In order to review the traffic that passes over you HTTP policy, what do you need to
make sure to do first? *
A) Turn up Diagnostic Logging under the Setup > Logging menu.
B) Turn on logging inside of WebBlocker.
C) No change needs to be made. All policies log by default.
D) Turn on Logging in the HTTP policy. - ANSWER-D
True or False: A packet filter is the most secure way to pass traffic through your firewall.
*
True
False - ANSWER-False.
A packet filter simply reviews the header information of a packet. A proxy is what allows
for more in-depth filtering of the traffic, thus providing additional security.
Which format would you use to block an executable file from being uploaded through
FTP? *
A) *.exe
B) EXE
C) *EXE
D) .EXE. - ANSWER-A
When adding a WebBlocker exception for *.microsoft.com/*, which sites would be
allowed? Select all that apply. *
QUESTIONS AND ANSWERS 100%
CORRECT
What are the three components of the WatchGuard System Manager software? *
A) Policy Manager, Firebox System Manager (FSM), Management Server
B) Policy Manager, HostWatch, Dimension
C) Policy Manager, Firebox System Manager (FSM), HostWatch
D) Policy Manager, Report Server, Management Server - ANSWER-C
Which of the following do you need to ensure you have when initially activating your
firewall? Choose all that apply. *
A) Firebox Serial Number
B) Feature Key
C) Account on the WatchGuard website
D) Device firmware version - ANSWER-A, C
Which account do you need to log into your WatchGuard firewall through WatchGuard
System Manager? *
A) Admin
B) Readonly
C) Status
D) Config - ANSWER-C
True or False: A Feature Key can be migrated between devices. *
True
False - ANSWER-False
A Feature Key is specific to a specific device, because it is based on the serial number.
What are the four types of network interfaces you can configure on your firewall? *
A) External, Trusted, Optional, Custom
B) Trusted, Primary, Optional, DHCP
C) External, Optional, Trusted, Optional
D) Optional, Trusted, Custom, Internet - ANSWER-A
True or False: There are three modes you can operate your firewall under: Mixed
Routing, Bridged and Drop-In. Bridged mode is the default selection. *
True
False - ANSWER-False.
Mixed Routing mode is the default mode.
, What can you view directly through Firebox System Manager? Select all that apply. *
A) Gateway Wireless Controller
B) Log Server
C) Traffic Monitor
D) Service Watch - ANSWER-A, C, D
True or False: Through Firebox System Manager, you can run the TCP Dump
command. *
True
False - ANSWER-True.
This option is available under the Diagnostic Tasks tool.
True or False: Policy precedence is most often determined by the alphabetical order of
policy names. *
True
False - ANSWER-False.
Policy precedence is determined by how specific the policy is in regards to what traffic is
allowed.
In order to review the traffic that passes over you HTTP policy, what do you need to
make sure to do first? *
A) Turn up Diagnostic Logging under the Setup > Logging menu.
B) Turn on logging inside of WebBlocker.
C) No change needs to be made. All policies log by default.
D) Turn on Logging in the HTTP policy. - ANSWER-D
True or False: A packet filter is the most secure way to pass traffic through your firewall.
*
True
False - ANSWER-False.
A packet filter simply reviews the header information of a packet. A proxy is what allows
for more in-depth filtering of the traffic, thus providing additional security.
Which format would you use to block an executable file from being uploaded through
FTP? *
A) *.exe
B) EXE
C) *EXE
D) .EXE. - ANSWER-A
When adding a WebBlocker exception for *.microsoft.com/*, which sites would be
allowed? Select all that apply. *
