AWS-CWI Part B Test 3 Questions With
Correct Answers
true or false weld sizes, links, and location of Welds shall conform to the requirements of the part
B book of specifications Correct Answ_true
According to the pressure piping clause, linear indications greater than 3/16 inch long are
unacceptable. true or false Correct Answ_true
on a pipeline what is the aggregate length of incomplete Fusion or IF that is considered a defect
when the weld length is less than 12 inches Correct Answ_when it exceeds 8% of the weld
length
what is the abbreviation for cracks? Correct Answ_C
A welder who qualifies on a butt weld with backing is qualified to a weld __________
Correct Answ_A weld that is going to be back gouged on the backside of the groove Weld
and then back welded.
A weld with a backing strip.
A weld with a backing weld with deposited first.
failure of any portion of a single test weldment for performance qualification constitutes failure
for Correct Answ_welders use in the test
, the welding procedure qualification record may be presented in which format? Correct
Answ_tabular or written
a weld in a Groove weld in a butt joint that is transverse to the direction of computed tensile
stress in a statically loaded non tubular Connection in a structural steel application is allowed
how much visible porosity? Correct Answ_none
what should an inspector do if it is noted that the welder taking the test is not exhibiting the
necessary skills? Correct Answ_Terminate the test at any stage that they demonstrate in
competency
For pipeline applications, a repair weld made at the backside of a Groove weld is called
___________? Correct Answ_back weld repair
when is a double repair of a crack permitted? Correct Answ_never
the test weld may be terminated at any stage if the necessary skills are not exhibited. True or
false Correct Answ_true
there is no maximum acceptance Criterion for visual inspection of fillet weld size. True or false
otherwise specified Correct Answ_true unless otherwise specified
what is a structural element which transmits the primary tensile stress and whose sole failure
would be catastrophic? Correct Answ_primary member
Correct Answers
true or false weld sizes, links, and location of Welds shall conform to the requirements of the part
B book of specifications Correct Answ_true
According to the pressure piping clause, linear indications greater than 3/16 inch long are
unacceptable. true or false Correct Answ_true
on a pipeline what is the aggregate length of incomplete Fusion or IF that is considered a defect
when the weld length is less than 12 inches Correct Answ_when it exceeds 8% of the weld
length
what is the abbreviation for cracks? Correct Answ_C
A welder who qualifies on a butt weld with backing is qualified to a weld __________
Correct Answ_A weld that is going to be back gouged on the backside of the groove Weld
and then back welded.
A weld with a backing strip.
A weld with a backing weld with deposited first.
failure of any portion of a single test weldment for performance qualification constitutes failure
for Correct Answ_welders use in the test
, the welding procedure qualification record may be presented in which format? Correct
Answ_tabular or written
a weld in a Groove weld in a butt joint that is transverse to the direction of computed tensile
stress in a statically loaded non tubular Connection in a structural steel application is allowed
how much visible porosity? Correct Answ_none
what should an inspector do if it is noted that the welder taking the test is not exhibiting the
necessary skills? Correct Answ_Terminate the test at any stage that they demonstrate in
competency
For pipeline applications, a repair weld made at the backside of a Groove weld is called
___________? Correct Answ_back weld repair
when is a double repair of a crack permitted? Correct Answ_never
the test weld may be terminated at any stage if the necessary skills are not exhibited. True or
false Correct Answ_true
there is no maximum acceptance Criterion for visual inspection of fillet weld size. True or false
otherwise specified Correct Answ_true unless otherwise specified
what is a structural element which transmits the primary tensile stress and whose sole failure
would be catastrophic? Correct Answ_primary member
