AWS-CWI Part B Test 3 Questions With
Answers
the welding procedure qualification record may be presented in which format? tabular or
written
a weld in a Groove weld in a butt joint that is transverse to the direction of computed tensile
stress in a statically loaded non tubular Connection in a structural steel application is allowed
how much visible porosity? none
what should an inspector do if it is noted that the welder taking the test is not exhibiting the
necessary skills? Terminate the test at any stage that they demonstrate in competency
For pipeline applications, a repair weld made at the backside of a Groove weld is called
___________? back weld repair
when is a double repair of a crack permitted? never
the test weld may be terminated at any stage if the necessary skills are not exhibited. True or
false true
there is no maximum acceptance Criterion for visual inspection of fillet weld size. True or false
otherwise specified true unless otherwise specified
, what is a structural element which transmits the primary tensile stress and whose sole failure
would be catastrophic? primary member
a burn through or bt is defined as a portion of the root bead where excessive penetration has
caused weld puddle to be blown into the pipe resulting in a _________ in the root bead of a
single Groove weld whole or depression
the procedures and apparatus for fracture toughness testing shall conform to the requirements of
_____________? AWS B4.0
on a guided bend test, how much radiesse must the corners in the bend be prepared? 1/8 of
an inch maximum
tack weld that have cracked shall be removed and re-welded. True or false true
what would be an acceptable condition for a cjp or Complete Joint penetration Groove weld
under structural steel visual inspection criteria? reinforcement 1/16 inch high on 1 inch
material
when it is not feasible to maintain preheat until the joint is Complete, Welding may be
interrupted and the joint allowed to cool slowly provide a minimum of _________ inch thickness
of weld is deposited for ________ % of the groove is filled, whichever is less. 3/8 of an
inch and 25%
what is the abbreviation for radiographic testing? RT
Answers
the welding procedure qualification record may be presented in which format? tabular or
written
a weld in a Groove weld in a butt joint that is transverse to the direction of computed tensile
stress in a statically loaded non tubular Connection in a structural steel application is allowed
how much visible porosity? none
what should an inspector do if it is noted that the welder taking the test is not exhibiting the
necessary skills? Terminate the test at any stage that they demonstrate in competency
For pipeline applications, a repair weld made at the backside of a Groove weld is called
___________? back weld repair
when is a double repair of a crack permitted? never
the test weld may be terminated at any stage if the necessary skills are not exhibited. True or
false true
there is no maximum acceptance Criterion for visual inspection of fillet weld size. True or false
otherwise specified true unless otherwise specified
, what is a structural element which transmits the primary tensile stress and whose sole failure
would be catastrophic? primary member
a burn through or bt is defined as a portion of the root bead where excessive penetration has
caused weld puddle to be blown into the pipe resulting in a _________ in the root bead of a
single Groove weld whole or depression
the procedures and apparatus for fracture toughness testing shall conform to the requirements of
_____________? AWS B4.0
on a guided bend test, how much radiesse must the corners in the bend be prepared? 1/8 of
an inch maximum
tack weld that have cracked shall be removed and re-welded. True or false true
what would be an acceptable condition for a cjp or Complete Joint penetration Groove weld
under structural steel visual inspection criteria? reinforcement 1/16 inch high on 1 inch
material
when it is not feasible to maintain preheat until the joint is Complete, Welding may be
interrupted and the joint allowed to cool slowly provide a minimum of _________ inch thickness
of weld is deposited for ________ % of the groove is filled, whichever is less. 3/8 of an
inch and 25%
what is the abbreviation for radiographic testing? RT
