ARCL 228 - FINAL STUDY QUESTIONS
What is the difference between localized and generalized dismemberment? - Answers-
Localized = removing body parts that could aid in identification (hands, fingers, head,
etc.), or to remove parts so the body can fit in a container for transport/disposal
Generalized = disarticulation at the natural joints - more often not associated with
disposal and generally shows disregard for the victim
What are the two types of saws (based on blade type) and what are some of their
features? - Answers- Crosscut saws: designed for cutting across the grain. The teeth
are angled ~70 degrees
Rip saws: cut parallel to (with) the grain. Teeth are at right angles and each one chisels
their way through.
How can you distinguish power saw cut marks vs. hand saw cut marks? What about
circular vs. straight? - Answers- Power saws cause uniform fine striations, while hand
saws cause irregular, more prominent striations.
Circular saws create striae with a fixed radius and creates and arc through the bone.
Straight saws leave non-fixed radius striae that are parallel to one another (no arc).
How can you determine the approximate number of teeth of a saw? - Answers- If the
floor of the kerf is rough, it is a coarse saw. If the kerf floor is smooth, it was a fine saw
(with many teeth)
What goes into analysis of saw marks? - Answers- 1) Basic description (number of
cuts, false starts, superficial false start scratches, and width of the kerf)
2) Direction of cut (direction of saw progress, direction of saw stroke)
3) General tooth size
4) Blade width (width of kerf/1.5)
5) Blade shape (circular or straight)
6) Source of energy (hand vs. power)
What is the difference between pits and punctures? Scoring and furrows? - Answers- A
puncture is caused when a carnivore tooth penetrates cortical bone. A pit is an
incomplete puncture.
Scoring is very shallow scratches from canine teeth, and furrows are deeper, usually
wider scratches.
Differences between animal and human dismemberment - Answers- - humans don't
remove scapulae and clavicles, just the humerus
- humans don't remove femur from the hip socket, just cut through the femur
- humans don't separate parts of the thorax
, What is elastic deformation? - Answers- Temporary response to loading on the bone. It
deforms slightly but returns to its original shape.
Result from "static loading" from slow speeds
What is plastic deformation? - Answers- Loading to the point where there is permanent
change. Prolonged force can cause the plastic region to reach the point of failure, which
is the fracture point.
Result from "dynamic loading" from high speeds.
What is an impaction fracture? - Answers- Parts of loaded bone start to shear off
because of a compression fracture. Complete fracture.
How does hydration impact the type of fracture? - Answers- Wet bone is more likely to
get spiral fractures. Dry bone is more likely to get transverse fractures.
What are the intrinsic factors of stronger bone (3)? - Answers- - denser cortical bone
(not a lot of elasticity - "heaviness")
- Diameter (wider bones are harder to break)
- Cortical shell thickness (thin cortical shell could be a result of osteoporosis)
What kinds of forces are cranial and long bones resistant to and why? - Answers-
Cranial - resistant to compression forces due to middle layer of trabecular bone
Long bones - resistant to compression because it grows longitudinally. Perpendicular
forces can result in deformation
Describe the difference between stress, strain, strength, and toughness - Answers-
Stress = load per unit area
Strain = the change in bone dimensions
Strength = the load applied at the fracture point
Toughness = total energy needed to cause a fracture (corresponds to the material's
energy absorption)
What is a stress fracture? - Answers- Repetitive pre-failure forces that cause small
cracks and lead to eventual failure.
How does osteoporosis result in kyphosis? - Answers- Vertebrae are more susceptible
to fracture due to loss of trabecular bone. Wedge shaped vertebrae form from partial
fractures. Causes curvature of the spine.
What is a Colle's fracture? - Answers- Break of the distal end of the radius. Occurs
when somebody tries to stop themselves from a fall.
What are the 5 fracture types? - Answers- 1) Transverse (tension forces) - occurs
perpendicularly to the long axis
2) Oblique fractures (compression) - occurs diagonally to the long axis
What is the difference between localized and generalized dismemberment? - Answers-
Localized = removing body parts that could aid in identification (hands, fingers, head,
etc.), or to remove parts so the body can fit in a container for transport/disposal
Generalized = disarticulation at the natural joints - more often not associated with
disposal and generally shows disregard for the victim
What are the two types of saws (based on blade type) and what are some of their
features? - Answers- Crosscut saws: designed for cutting across the grain. The teeth
are angled ~70 degrees
Rip saws: cut parallel to (with) the grain. Teeth are at right angles and each one chisels
their way through.
How can you distinguish power saw cut marks vs. hand saw cut marks? What about
circular vs. straight? - Answers- Power saws cause uniform fine striations, while hand
saws cause irregular, more prominent striations.
Circular saws create striae with a fixed radius and creates and arc through the bone.
Straight saws leave non-fixed radius striae that are parallel to one another (no arc).
How can you determine the approximate number of teeth of a saw? - Answers- If the
floor of the kerf is rough, it is a coarse saw. If the kerf floor is smooth, it was a fine saw
(with many teeth)
What goes into analysis of saw marks? - Answers- 1) Basic description (number of
cuts, false starts, superficial false start scratches, and width of the kerf)
2) Direction of cut (direction of saw progress, direction of saw stroke)
3) General tooth size
4) Blade width (width of kerf/1.5)
5) Blade shape (circular or straight)
6) Source of energy (hand vs. power)
What is the difference between pits and punctures? Scoring and furrows? - Answers- A
puncture is caused when a carnivore tooth penetrates cortical bone. A pit is an
incomplete puncture.
Scoring is very shallow scratches from canine teeth, and furrows are deeper, usually
wider scratches.
Differences between animal and human dismemberment - Answers- - humans don't
remove scapulae and clavicles, just the humerus
- humans don't remove femur from the hip socket, just cut through the femur
- humans don't separate parts of the thorax
, What is elastic deformation? - Answers- Temporary response to loading on the bone. It
deforms slightly but returns to its original shape.
Result from "static loading" from slow speeds
What is plastic deformation? - Answers- Loading to the point where there is permanent
change. Prolonged force can cause the plastic region to reach the point of failure, which
is the fracture point.
Result from "dynamic loading" from high speeds.
What is an impaction fracture? - Answers- Parts of loaded bone start to shear off
because of a compression fracture. Complete fracture.
How does hydration impact the type of fracture? - Answers- Wet bone is more likely to
get spiral fractures. Dry bone is more likely to get transverse fractures.
What are the intrinsic factors of stronger bone (3)? - Answers- - denser cortical bone
(not a lot of elasticity - "heaviness")
- Diameter (wider bones are harder to break)
- Cortical shell thickness (thin cortical shell could be a result of osteoporosis)
What kinds of forces are cranial and long bones resistant to and why? - Answers-
Cranial - resistant to compression forces due to middle layer of trabecular bone
Long bones - resistant to compression because it grows longitudinally. Perpendicular
forces can result in deformation
Describe the difference between stress, strain, strength, and toughness - Answers-
Stress = load per unit area
Strain = the change in bone dimensions
Strength = the load applied at the fracture point
Toughness = total energy needed to cause a fracture (corresponds to the material's
energy absorption)
What is a stress fracture? - Answers- Repetitive pre-failure forces that cause small
cracks and lead to eventual failure.
How does osteoporosis result in kyphosis? - Answers- Vertebrae are more susceptible
to fracture due to loss of trabecular bone. Wedge shaped vertebrae form from partial
fractures. Causes curvature of the spine.
What is a Colle's fracture? - Answers- Break of the distal end of the radius. Occurs
when somebody tries to stop themselves from a fall.
What are the 5 fracture types? - Answers- 1) Transverse (tension forces) - occurs
perpendicularly to the long axis
2) Oblique fractures (compression) - occurs diagonally to the long axis