M142 Himars rocket launcher operator’s
exam questions well answered to pass
What manual and appendix cover Mlrs/Himars Battalion Safety? - correct answer
✔✔ATP 3-09.60, Appendix G
Safety Data for the M270A1 is the same as the Himars - correct answer ✔✔False
To develop Mlrs/Himars safety data, there are three things that must be done.
Which of the following is not one of those three? - correct answer ✔✔Determine
Usable Portion of the Impact Area
The surface danger zone diagram is developed and maintained in the _____. -
correct answer ✔✔Fire direction center
The surface danger zone consists of all but which of the following? - correct
answer ✔✔Area E
This area is immediately behind the firing point or area that is at risk from blast
and debris, which no one can occupy. - correct answer ✔✔Launcher danger area
Area F is comprised of the Launcher Danger Area and the _____. - correct answer
✔✔Noise hazard area
This is the danger area directly in front of the firing point or operational area. -
correct answer ✔✔Exclusion Area I.
, This is the danger area between the forward limit of exclusion area I and the SDZ
impact area. - correct answer ✔✔Exclusion Area II
This distance is wide enough to include all debris (payload warhead skin, and
rocket motor) to either side of the target from normally functioning rounds. -
correct answer ✔✔Distance W
A distance beyond the target adequate to contain a properly functioning rocket. -
correct answer ✔✔Distance X
A distance short of the target sufficient to include all debris (payload warhead
skin, and rocket motor) from normally functioning rounds. - correct answer
✔✔Distance Y
Consists of the launcher danger area and noise hazard area - correct answer
✔✔Area F
There are _____ methods to compute safety data for Mlrs/Himars - correct
answer ✔✔Three
Which of the following methods are used to compute safety data for Himars? -
correct answer ✔✔Op Area, Pt-to-Pt, Firing Pt
Safety computations for each of the methods used to derive safety data are
completed in _____ phases. - correct answer ✔✔Four
exam questions well answered to pass
What manual and appendix cover Mlrs/Himars Battalion Safety? - correct answer
✔✔ATP 3-09.60, Appendix G
Safety Data for the M270A1 is the same as the Himars - correct answer ✔✔False
To develop Mlrs/Himars safety data, there are three things that must be done.
Which of the following is not one of those three? - correct answer ✔✔Determine
Usable Portion of the Impact Area
The surface danger zone diagram is developed and maintained in the _____. -
correct answer ✔✔Fire direction center
The surface danger zone consists of all but which of the following? - correct
answer ✔✔Area E
This area is immediately behind the firing point or area that is at risk from blast
and debris, which no one can occupy. - correct answer ✔✔Launcher danger area
Area F is comprised of the Launcher Danger Area and the _____. - correct answer
✔✔Noise hazard area
This is the danger area directly in front of the firing point or operational area. -
correct answer ✔✔Exclusion Area I.
, This is the danger area between the forward limit of exclusion area I and the SDZ
impact area. - correct answer ✔✔Exclusion Area II
This distance is wide enough to include all debris (payload warhead skin, and
rocket motor) to either side of the target from normally functioning rounds. -
correct answer ✔✔Distance W
A distance beyond the target adequate to contain a properly functioning rocket. -
correct answer ✔✔Distance X
A distance short of the target sufficient to include all debris (payload warhead
skin, and rocket motor) from normally functioning rounds. - correct answer
✔✔Distance Y
Consists of the launcher danger area and noise hazard area - correct answer
✔✔Area F
There are _____ methods to compute safety data for Mlrs/Himars - correct
answer ✔✔Three
Which of the following methods are used to compute safety data for Himars? -
correct answer ✔✔Op Area, Pt-to-Pt, Firing Pt
Safety computations for each of the methods used to derive safety data are
completed in _____ phases. - correct answer ✔✔Four
