Saca Certification C-101 || Already Passed.
Function correct answers The three Fs of product design are form, fit and __________.
Lean Manufacturing correct answers High product quality, quick delivery, low costs are the
primary goals of what system?
Standardize correct answers Which 5S step involves formatting 5S work instructions so that they
look and read alike?
Reduces the waste of excess motion, helps improve morale, and enables other lean methods to be
more successful correct answers How does the 5S method aid in the goal of lean manufacturing?
HMI correct answers What is the interface used with CNC machines to load and monitor
programs?
PLC correct answers The automation of many different manufacturing processes is done through
the use of a small computer called a __________.
An error message. correct answers When a machine stops due to an problem, what would the
machine's HMI typically display?
Industry 4.0 correct answers Smart sensors connected to manufacturing networks creates what
level of Industry?
Ethernet correct answers What standard introduced in the early 1980s established a method to
physically connect machines from different manufacturers enabling them to communicate to one
another?
Predictive maintenance correct answers Which IIoT application monitors equipment during
normal operation to prevent failures to the equipment?
Standards correct answers Occupational Safety and Health Administration(OSHA) develops
__________ for safety retail and service industries to construction and manufacturing.
True correct answers The regulation that requires manufacturers to document and report
information on the types of chemicals they use, store, release into the environment, or dispose of
is known as EPCRA. Is this statement TRUE or FALSE?
Computers correct answers The use of ___________________marked the advent of the third
industrial revolution?
Notify a supervisor immediately correct answers If an operator knows a safety problem exists
with a machine, the operator should __________.
, Emergency stop correct answers A(n) __________ is a device or system that shuts down a
machine immediately if the operator is in danger.
It is closed correct answers If the energy sources are shut down, what would this mean for a
pneumatic valve?
1. Shut down the equipment
2.Connect Hasp
3. Attach Lock
4. Add Tag
5. Test Start Equipment correct answers What are the 5 steps of electrical Lockout/tagout
Falls correct answers Which of the following is a common cause of workplace death?
Hazard assessment correct answers The process of identifying potential hazards in the workplace
is known as a __________.
TRUE correct answers An injury is defined as physical harm to the body that happens as a result
of exposure to some form of energy that exceeds the body's tolerance. Is this statement TRUE or
FALSE?
Shut down their machines and leave the building correct answers In the event of an evacuation
alarm, employees should __________.
15 correct answers After exposure to most chemicals the eyes should be flushed continuously for
__________ minutes.
Thickeners correct answers Grease is made from a liquid lubricant with what added to it to make
it semi-solid?
Pictograms correct answers What does the GHS hazardous material classification systems use to
identify the danger of a material?
16 correct answers Every Safety Data Sheet must follow the same format that has __________
sections.
SDS correct answers Safe handling procedures of chemicals are found in the __________.
First in, first out correct answers __________ is a system that rotates chemical stock to ensure
they are used within their shelf life.
Explosive correct answers An orange DOT label indicates the material is __________.
DOT Hazardous Materials Table correct answers Before shipping a hazardous material, review
the __________, which provides directions for packaging, labels, UN ID, and required
paperwork for shipment.
Function correct answers The three Fs of product design are form, fit and __________.
Lean Manufacturing correct answers High product quality, quick delivery, low costs are the
primary goals of what system?
Standardize correct answers Which 5S step involves formatting 5S work instructions so that they
look and read alike?
Reduces the waste of excess motion, helps improve morale, and enables other lean methods to be
more successful correct answers How does the 5S method aid in the goal of lean manufacturing?
HMI correct answers What is the interface used with CNC machines to load and monitor
programs?
PLC correct answers The automation of many different manufacturing processes is done through
the use of a small computer called a __________.
An error message. correct answers When a machine stops due to an problem, what would the
machine's HMI typically display?
Industry 4.0 correct answers Smart sensors connected to manufacturing networks creates what
level of Industry?
Ethernet correct answers What standard introduced in the early 1980s established a method to
physically connect machines from different manufacturers enabling them to communicate to one
another?
Predictive maintenance correct answers Which IIoT application monitors equipment during
normal operation to prevent failures to the equipment?
Standards correct answers Occupational Safety and Health Administration(OSHA) develops
__________ for safety retail and service industries to construction and manufacturing.
True correct answers The regulation that requires manufacturers to document and report
information on the types of chemicals they use, store, release into the environment, or dispose of
is known as EPCRA. Is this statement TRUE or FALSE?
Computers correct answers The use of ___________________marked the advent of the third
industrial revolution?
Notify a supervisor immediately correct answers If an operator knows a safety problem exists
with a machine, the operator should __________.
, Emergency stop correct answers A(n) __________ is a device or system that shuts down a
machine immediately if the operator is in danger.
It is closed correct answers If the energy sources are shut down, what would this mean for a
pneumatic valve?
1. Shut down the equipment
2.Connect Hasp
3. Attach Lock
4. Add Tag
5. Test Start Equipment correct answers What are the 5 steps of electrical Lockout/tagout
Falls correct answers Which of the following is a common cause of workplace death?
Hazard assessment correct answers The process of identifying potential hazards in the workplace
is known as a __________.
TRUE correct answers An injury is defined as physical harm to the body that happens as a result
of exposure to some form of energy that exceeds the body's tolerance. Is this statement TRUE or
FALSE?
Shut down their machines and leave the building correct answers In the event of an evacuation
alarm, employees should __________.
15 correct answers After exposure to most chemicals the eyes should be flushed continuously for
__________ minutes.
Thickeners correct answers Grease is made from a liquid lubricant with what added to it to make
it semi-solid?
Pictograms correct answers What does the GHS hazardous material classification systems use to
identify the danger of a material?
16 correct answers Every Safety Data Sheet must follow the same format that has __________
sections.
SDS correct answers Safe handling procedures of chemicals are found in the __________.
First in, first out correct answers __________ is a system that rotates chemical stock to ensure
they are used within their shelf life.
Explosive correct answers An orange DOT label indicates the material is __________.
DOT Hazardous Materials Table correct answers Before shipping a hazardous material, review
the __________, which provides directions for packaging, labels, UN ID, and required
paperwork for shipment.
