NCCER Electrical Level 1 - Module 5 Introduction to the
NEC (National Electric Code) || very Flawless.
Which word or phrase best describes the NEC requirements for the installation of electrical
systems? correct answers Minimum
All of the following groups are usually represented on the Code-Making Panels, except
__________. correct answers Government lobbyists
Mandatory and permissive rules are defined in _______. correct answers NEC Article 90
The general design and installation of electrical systems is covered in _____. correct answers
NEC Chapters 1,2,3, and 4
Devices such as radios, televisions, and telephones are covered in _______. correct answers NEC
Chapter 8
NEC Article 110 covers _____. correct answers General requirements for electrical installations
Cable trays are covered in _______. correct answers NEC Article 392
Installation procedures for luminaires are provided in _____. correct answers NEC Article 410
Theaters are covered in _______. correct answers NEC article 520
NEC article 600 covers _______. correct answers Electric Signs and Outline Lighting
Examples of branch circuit calculations can be found in _______. correct answers NEC
Informative Annex D
Information on conductors for general wiring can be found in ______. correct answers NEC
Article 310
Within NEC Article 310, locate information on stranded conductors. Which size conductors must
be stranded when installed in raceways? correct answers 8 AWG or larger
Information on switchboards and panelboards can be found in _____. correct answers NEC
Article 408
Within NEC Article 408, find the section that covers switchboard clearances. Assuming the
switchboard does not have a noncombustible shield, what is the minimum clearance between the
top of the switchboard and a combustible ceiling? correct answers 36" (900 mm)
______ are the main topics of the NEC. correct answers Articles
NEC (National Electric Code) || very Flawless.
Which word or phrase best describes the NEC requirements for the installation of electrical
systems? correct answers Minimum
All of the following groups are usually represented on the Code-Making Panels, except
__________. correct answers Government lobbyists
Mandatory and permissive rules are defined in _______. correct answers NEC Article 90
The general design and installation of electrical systems is covered in _____. correct answers
NEC Chapters 1,2,3, and 4
Devices such as radios, televisions, and telephones are covered in _______. correct answers NEC
Chapter 8
NEC Article 110 covers _____. correct answers General requirements for electrical installations
Cable trays are covered in _______. correct answers NEC Article 392
Installation procedures for luminaires are provided in _____. correct answers NEC Article 410
Theaters are covered in _______. correct answers NEC article 520
NEC article 600 covers _______. correct answers Electric Signs and Outline Lighting
Examples of branch circuit calculations can be found in _______. correct answers NEC
Informative Annex D
Information on conductors for general wiring can be found in ______. correct answers NEC
Article 310
Within NEC Article 310, locate information on stranded conductors. Which size conductors must
be stranded when installed in raceways? correct answers 8 AWG or larger
Information on switchboards and panelboards can be found in _____. correct answers NEC
Article 408
Within NEC Article 408, find the section that covers switchboard clearances. Assuming the
switchboard does not have a noncombustible shield, what is the minimum clearance between the
top of the switchboard and a combustible ceiling? correct answers 36" (900 mm)
______ are the main topics of the NEC. correct answers Articles
