Carpentry 1 Module 7 Questions and Answers | Latest Version | 2024/2025 | Correct & Verified

Carpentry 1 Module 7 Questions and Answers | Latest Version | 2024/2025 | Correct & Verified What does it mean to "square" a corner in carpentry? To square a corner means to ensure it forms a 90-degree angle, crucial for accurate construction. What is the purpose of a clamp in carpentry? Clamps hold materials in place while the glue dries or while cutting, ensuring a precise and stable result. Why should you measure twice before cutting? Measuring twice ensures accuracy and prevents mistakes that could waste materials or require rework. What is the purpose of a framing hammer? A framing hammer is used for driving large nails into framing lumber, typically featuring a longer handle and a heavier head for more force. 2 How can you prevent wood from splintering when cutting? Use painter’s tape or a fine-toothed blade, and make the cut slowly to minimize splintering. What is a pocket hole joint, and when is it used? A pocket hole joint is used to join two pieces of wood at an angle, often when a concealed joint is desired. What should you do if you encounter a twisted or warped piece of lumber? Replace the warped or twisted piece to ensure structural integrity and proper alignment in your project. What is the purpose of using a level during framing? A level ensures that vertical and horizontal components of the framing are properly aligned, preventing structural issues. What does "fitting" mean in carpentry? "Fitting" refers to the process of adjusting pieces of wood so they fit together correctly and precisely in the design. 3 Why is it important to have proper ventilation when working with certain finishing materials? Proper ventilation reduces exposure to harmful fumes and ensures a safer work environment when using paints, varnishes, or adhesives. What is the purpose of a framing square in carpentry? A framing square is used to measure and mark right angles, square edges, and make other precise measurements during framing tasks. What is the function of a chalk line in carpentry? A chalk line is used to mark straight lines on surfaces, often for cutting or alignment purposes. Why is it important to check the level of a surface before framing? Ensuring surfaces are level prevents structural problems and ensures proper alignment during construction. What does "plumb" mean in carpentry? "Plumb" refers to a vertical alignment, ensuring that a structure or component is perfectly straight up and down. 4 How do you properly use a tape measure