TESTOUT NETWORK PRO Chapter 1-3
QUESTIONS & ANSWERS 100%
SOLVED!!
Which of the following geographic network types is made up of an interconnection of
LANs? - ANSWERSCampus Area Network (CAN)
You have implemented a network where each device provides all other devices on the
network with access to shared files.
What type of network do you have? - ANSWERSPeer-to-peer
You have implemented a network where hosts are assigned specific roles, such as file
sharing and printing roles. Other hosts access those resources, but do not host services
of their own.
What type of network do you have? - ANSWERSClient-server
Which of the following geographic network types are typically managed by a city as a
public utility? - ANSWERSMetropolitan area network (MAN)
You have a small network that uses a switch to connect multiple devices. Which
physical topology are you using? - ANSWERSStar
Your manager has asked you to implement a wired network infrastructure that will
accommodate failed connections. You don't have a large budget, so you decide to
provide redundancy for only a handful of critical devices. - ANSWERSPartial mesh
You have a network that uses a logical ring topology. How do messages travel through
the network? - ANSWERSMessages travel from one device to the next until they reach
the destination device.
You have a network that uses a logical bus topology. How do messages travel through
the network? - ANSWERSMessages are broadcast to all devices connected to the
network.
Which of the following topologies connects all devices to a trunk cable? -
ANSWERSBus
Which of the following topologies connects each device to a neighboring device? -
ANSWERSRing
In which of the following topologies does each device on the network act as a repeater,
sending the signal to the next device? - ANSWERSRing
, Which of the following topologies connects each network device to a central hub? -
ANSWERSStar
You have implemented an ad hoc wireless network that doesn't employ a wireless
access point. Every wireless network card can communicate directly with any other
wireless network card on the network.
What type of physical network topology has been implemented in this type of network? -
ANSWERSMesh
Your manager has asked you to implement a network infrastructure that will
accommodate failed connections.
Which of the following network topologies provides redundancy for a failed link? -
ANSWERSMesh
You want to implement a fault tolerant topology as you connect routers on your wide
area network. Which of the following topologies meets your needs? - ANSWERSMesh
What device is used to create a physical star topology? - ANSWERSSwitch
Which of the following functions are performed by the OSI Transport layer? (Select
three.) - ANSWERSReliable message delivery
End-to-end flow control
Data segmentation and reassembly
What is the basic purpose of the OSI Physical layer? - ANSWERSCoordinates rules for
transmitting bits.
Which of the following are included as part of Data Link layer specifications? (Select
two.) - ANSWERSIdentifying physical network devices.
Controlling how messages are propagated through the network.
In the OSI model, what is the primary function of the Network layer? -
ANSWERSRoutes messages between networks
Which of the following tasks is associated with the Session layer? -
ANSWERSConnection establishment
In the OSI model, which of the following functions are performed at the Presentation
layer? (Select two.) - ANSWERSSpecify data format (such as file formats)
Encrypt and compress data
In the OSI model, which of the following functions are performed at the Application
layer? (Select all that apply.) - ANSWERSIntegrating network functionality into the host
operating system
Enabling communication between network clients and services
QUESTIONS & ANSWERS 100%
SOLVED!!
Which of the following geographic network types is made up of an interconnection of
LANs? - ANSWERSCampus Area Network (CAN)
You have implemented a network where each device provides all other devices on the
network with access to shared files.
What type of network do you have? - ANSWERSPeer-to-peer
You have implemented a network where hosts are assigned specific roles, such as file
sharing and printing roles. Other hosts access those resources, but do not host services
of their own.
What type of network do you have? - ANSWERSClient-server
Which of the following geographic network types are typically managed by a city as a
public utility? - ANSWERSMetropolitan area network (MAN)
You have a small network that uses a switch to connect multiple devices. Which
physical topology are you using? - ANSWERSStar
Your manager has asked you to implement a wired network infrastructure that will
accommodate failed connections. You don't have a large budget, so you decide to
provide redundancy for only a handful of critical devices. - ANSWERSPartial mesh
You have a network that uses a logical ring topology. How do messages travel through
the network? - ANSWERSMessages travel from one device to the next until they reach
the destination device.
You have a network that uses a logical bus topology. How do messages travel through
the network? - ANSWERSMessages are broadcast to all devices connected to the
network.
Which of the following topologies connects all devices to a trunk cable? -
ANSWERSBus
Which of the following topologies connects each device to a neighboring device? -
ANSWERSRing
In which of the following topologies does each device on the network act as a repeater,
sending the signal to the next device? - ANSWERSRing
, Which of the following topologies connects each network device to a central hub? -
ANSWERSStar
You have implemented an ad hoc wireless network that doesn't employ a wireless
access point. Every wireless network card can communicate directly with any other
wireless network card on the network.
What type of physical network topology has been implemented in this type of network? -
ANSWERSMesh
Your manager has asked you to implement a network infrastructure that will
accommodate failed connections.
Which of the following network topologies provides redundancy for a failed link? -
ANSWERSMesh
You want to implement a fault tolerant topology as you connect routers on your wide
area network. Which of the following topologies meets your needs? - ANSWERSMesh
What device is used to create a physical star topology? - ANSWERSSwitch
Which of the following functions are performed by the OSI Transport layer? (Select
three.) - ANSWERSReliable message delivery
End-to-end flow control
Data segmentation and reassembly
What is the basic purpose of the OSI Physical layer? - ANSWERSCoordinates rules for
transmitting bits.
Which of the following are included as part of Data Link layer specifications? (Select
two.) - ANSWERSIdentifying physical network devices.
Controlling how messages are propagated through the network.
In the OSI model, what is the primary function of the Network layer? -
ANSWERSRoutes messages between networks
Which of the following tasks is associated with the Session layer? -
ANSWERSConnection establishment
In the OSI model, which of the following functions are performed at the Presentation
layer? (Select two.) - ANSWERSSpecify data format (such as file formats)
Encrypt and compress data
In the OSI model, which of the following functions are performed at the Application
layer? (Select all that apply.) - ANSWERSIntegrating network functionality into the host
operating system
Enabling communication between network clients and services
