1|Page
Ammo CDC's set B (good one) Exam Questions
and Answers 100% Pass
Before using an electric drill, what is the first thing you should do? - ✔✔Make sure the diameter of the
hole to be drilled is within the capacity of the drill
The purpose of cutting lubricant in most drilling ops is to increase the - ✔✔Drilling speed and drill bit life
Minimum protection using a bench grinder - ✔✔eye and face protection
what condition would prevent an operator from applying power to a hoist or other powered lifting
device - ✔✔an AF Form 979
most common type of lifting sling - ✔✔wire rope
the enunciators displayed on the fluke 8025 series multimeter are used to distinguish among - ✔✔ohms,
kilohm, and megohms
2 operational modes of the Fluke 8025 - ✔✔range and hold
the steering system on the MHU 141/ M trailer has a turning radius of how many inches - ✔✔200
When the MHU 141 trailer is loaded or towed with the hinged deck panels open, what must be done? -
✔✔the deck supports must be properly positioned and locked in place with quick release pins
Max load capacity of the MHU 110/ M trailer - ✔✔15,000
the parking brake on the MHU 110/ M is applied by - ✔✔pulling either one of two hand levers located on
each side of the front of trailer
how many openings are on the deck of the MHU- 226 trailer - ✔✔3
Created by Katelyn Whitman © 2025, All Rights Reserved. 100% PASS GUARANTEE
,2|Page
what type of steering aids the MHU- 226 - ✔✔four wheeled double ackerman
After 463L pallets are positioned on a rollerized trailer, what can you use to secure the pallets - ✔✔MB-1
chain assemblies and or tie down straps
what kind of movements supports on base activities to or from the flightline - ✔✔operational
what munitions item is not loaded into transport modules by munitions personnel - ✔✔20 mm
what transport module used for decoy munitions has a max capacity of 30 magazines - ✔✔ALE- 50
How often should the positive locking devices on the doors of munitions transport modules be checked -
✔✔after loading, unloading and periodically between stops
the purpose of the transport beam beneath the lift arm assemblies on the MJ- 1 series lift truck is to -
✔✔provide added support and to relieve hydraulic pressure from the lift arms when carrying loads for
long distances
Lifting capacity of the MJ 1 series lift truck - ✔✔3,000
Lifting capacity of MHU 83 lift truck - ✔✔7,000
When using fork adapters on MHU 83 series lift truck - ✔✔it reduces lifting capacity by 1,000
What happens when you release the accelerator pedal on a vehicle driven with a hydrostatic transmission
- ✔✔the unit coasts to a stop very quickly
what is the primary drawback to using the hydraulic hand pump to build hydraulic pressure on the
MHU 83 lift truck - ✔✔extremely slow way to build hydraulic pressure
How is the yaw positioning from the cradle or boom controls of an MJ 1 lift truck adjusted - ✔✔Manually
what category are Air Force air compressors classified? - ✔✔high or low pressure
Created by Katelyn Whitman © 2025, All Rights Reserved. 100% PASS GUARANTEE
, 3|Page
what is the purpose behind good operator maintenance of all assigned vehicles - ✔✔maintain vehicle
serviceability at reduced cost
max amount thee MB 4 aircraft towing tractor can tow - ✔✔140,000
pintle safety locking pins must remain attached to the pintle assembly - ✔✔to prevent an insecure pin
from coming out and getting lost
what gear should a tractor with automatic transmission while going downhill - ✔✔low
what are hose couplers used for on tractor trailer combination - ✔✔to connect the service and emergency
brake airlines from the tractor to the trailer
which procedure is not a consideration for backing a tractor trailer combination - ✔✔turn towards the
passengers side
with the forks level, what is the maximum reach of the variable reach forklift - ✔✔22 feet
what USAF gun system is loaded and unloaded by the Linkless Ammo Loading System (LALS) - ✔✔the
M61A1, 20mm cannon
Which weapons replaceable assembly of the Linkless Ammo Loading System (LALS) has no moving
parts - ✔✔storage container
Which subassembly of the Universal ammo loading system (UALS) houses a remaining indicator
window that provides approximate number of rounds in unit - ✔✔Outer drum
Which subassembly of the UALS provides the means to load live rounds into aircraft gun system -
✔✔Interface Unit
Which subassembly of the UALS provides the power that cycles the rounds through the system -
✔✔pneumatic regulator
Created by Katelyn Whitman © 2025, All Rights Reserved. 100% PASS GUARANTEE
Ammo CDC's set B (good one) Exam Questions
and Answers 100% Pass
Before using an electric drill, what is the first thing you should do? - ✔✔Make sure the diameter of the
hole to be drilled is within the capacity of the drill
The purpose of cutting lubricant in most drilling ops is to increase the - ✔✔Drilling speed and drill bit life
Minimum protection using a bench grinder - ✔✔eye and face protection
what condition would prevent an operator from applying power to a hoist or other powered lifting
device - ✔✔an AF Form 979
most common type of lifting sling - ✔✔wire rope
the enunciators displayed on the fluke 8025 series multimeter are used to distinguish among - ✔✔ohms,
kilohm, and megohms
2 operational modes of the Fluke 8025 - ✔✔range and hold
the steering system on the MHU 141/ M trailer has a turning radius of how many inches - ✔✔200
When the MHU 141 trailer is loaded or towed with the hinged deck panels open, what must be done? -
✔✔the deck supports must be properly positioned and locked in place with quick release pins
Max load capacity of the MHU 110/ M trailer - ✔✔15,000
the parking brake on the MHU 110/ M is applied by - ✔✔pulling either one of two hand levers located on
each side of the front of trailer
how many openings are on the deck of the MHU- 226 trailer - ✔✔3
Created by Katelyn Whitman © 2025, All Rights Reserved. 100% PASS GUARANTEE
,2|Page
what type of steering aids the MHU- 226 - ✔✔four wheeled double ackerman
After 463L pallets are positioned on a rollerized trailer, what can you use to secure the pallets - ✔✔MB-1
chain assemblies and or tie down straps
what kind of movements supports on base activities to or from the flightline - ✔✔operational
what munitions item is not loaded into transport modules by munitions personnel - ✔✔20 mm
what transport module used for decoy munitions has a max capacity of 30 magazines - ✔✔ALE- 50
How often should the positive locking devices on the doors of munitions transport modules be checked -
✔✔after loading, unloading and periodically between stops
the purpose of the transport beam beneath the lift arm assemblies on the MJ- 1 series lift truck is to -
✔✔provide added support and to relieve hydraulic pressure from the lift arms when carrying loads for
long distances
Lifting capacity of the MJ 1 series lift truck - ✔✔3,000
Lifting capacity of MHU 83 lift truck - ✔✔7,000
When using fork adapters on MHU 83 series lift truck - ✔✔it reduces lifting capacity by 1,000
What happens when you release the accelerator pedal on a vehicle driven with a hydrostatic transmission
- ✔✔the unit coasts to a stop very quickly
what is the primary drawback to using the hydraulic hand pump to build hydraulic pressure on the
MHU 83 lift truck - ✔✔extremely slow way to build hydraulic pressure
How is the yaw positioning from the cradle or boom controls of an MJ 1 lift truck adjusted - ✔✔Manually
what category are Air Force air compressors classified? - ✔✔high or low pressure
Created by Katelyn Whitman © 2025, All Rights Reserved. 100% PASS GUARANTEE
, 3|Page
what is the purpose behind good operator maintenance of all assigned vehicles - ✔✔maintain vehicle
serviceability at reduced cost
max amount thee MB 4 aircraft towing tractor can tow - ✔✔140,000
pintle safety locking pins must remain attached to the pintle assembly - ✔✔to prevent an insecure pin
from coming out and getting lost
what gear should a tractor with automatic transmission while going downhill - ✔✔low
what are hose couplers used for on tractor trailer combination - ✔✔to connect the service and emergency
brake airlines from the tractor to the trailer
which procedure is not a consideration for backing a tractor trailer combination - ✔✔turn towards the
passengers side
with the forks level, what is the maximum reach of the variable reach forklift - ✔✔22 feet
what USAF gun system is loaded and unloaded by the Linkless Ammo Loading System (LALS) - ✔✔the
M61A1, 20mm cannon
Which weapons replaceable assembly of the Linkless Ammo Loading System (LALS) has no moving
parts - ✔✔storage container
Which subassembly of the Universal ammo loading system (UALS) houses a remaining indicator
window that provides approximate number of rounds in unit - ✔✔Outer drum
Which subassembly of the UALS provides the means to load live rounds into aircraft gun system -
✔✔Interface Unit
Which subassembly of the UALS provides the power that cycles the rounds through the system -
✔✔pneumatic regulator
Created by Katelyn Whitman © 2025, All Rights Reserved. 100% PASS GUARANTEE
