IOG1 Nebosh
Study online at https://quizlet.com/_1ke63w
1. In your safety role on an offshore - the temperature of the pump and
oil production platform, you have associated pipework leading to the
been asked to take part in a risk risk of burns from contact.
assessment and subsequent proce- - the vertical distance (work at
dures for the preparation and repair of height) leading to falls from height.
a large, electrically-driven pump con- - the pump accidentally being start-
taining a hot, flammable liquid. The ed and leading to injury from contact
pump needs to be stopped, the large with rotating parts.
suction and discharge valves closed, - the release of flammable vapour
the pump contents removed and the leading to fire/explosion
pump inerted before the repair is car- - the gas used for inerting will re-
ried out. duce the oxygen concentration and
may lead to asphyxiation
A. Identify hazards AND, in EACH - the use of excessive force to close
case, outline an associated risk valves leading to manual handling
with the preparation of the pump: injury.
2. In your safety role on an offshore - isolation of electrical power
oil production platform, you have - isolation of pipelines (various
been asked to take part in a risk means, such as blanks/spades) re-
assessment and subsequent proce- leasing stored energy
dures for the preparation and repair of
- the use of LOTO
a large, electrically-driven pump con-- allowing hot machinery to cool
taining a hot, flammable liquid. The - the use of barriers or fences to
pump needs to be stopped, the large segregate the work
suction and discharge valves closed, - the provision of safe access equip-
the pump contents removed and the ment such as scaffolding
pump inerted before the repair is car-- the issue of permits
ried out. - the use of PPE, such as respira-
tors, chemical suits
B. Outline control measures that - the use of trained and skilled per-
should be taken for the repair of the sonnel and the monitoring of the at-
pump mosphere for potentially flammable
conditions.
3. In your safety role on an offshore - the electrical isolator associated
oil production platform, you have with the electric motor;
been asked to take part in a risk
assessment and subsequent proce- - the inlet or outlet valves and the
1/8
, IOG1 Nebosh
Study online at https://quizlet.com/_1ke63w
dures for the preparation and repair of key control boxes within the control
a large, electrically-driven pump con- room
taining a hot, flammable liquid. The
pump needs to be stopped, the large
suction and discharge valves closed,
the pump contents removed and the
pump inerted before the repair is car-
ried out.
C. Identify locations where locks and
associated tags should be applied for
Lock Out, Tag Out (LOTO).
4. In your safety role on an offshore - the typical types of worker would
oil production platform, you have include operators, mechanical or
been asked to take part in a risk electrical technicians, contractors
assessment and subsequent proce- and supervisors.
dures for the preparation and repair of
a large, electrically-driven pump con-
taining a hot, flammable liquid. The
pump needs to be stopped, the large
suction and discharge valves closed,
the pump contents removed and the
pump inerted before the repair is car-
ried out.
D. Identify types of worker who may
attach personal locks within LOTO in
this situation.
5. Identify documents that could be - training records
provided by contractors in order to - proof of any qualifications held by
demonstrate their health and safety workers;
competence to an oil and gas industry - the existence of a health and safety
client policy, together with all the systems
for implementing it;
- evidence of previous jobs (recom-
mendations)
- Accident/Incident (Record/Histo-
2/8
Study online at https://quizlet.com/_1ke63w
1. In your safety role on an offshore - the temperature of the pump and
oil production platform, you have associated pipework leading to the
been asked to take part in a risk risk of burns from contact.
assessment and subsequent proce- - the vertical distance (work at
dures for the preparation and repair of height) leading to falls from height.
a large, electrically-driven pump con- - the pump accidentally being start-
taining a hot, flammable liquid. The ed and leading to injury from contact
pump needs to be stopped, the large with rotating parts.
suction and discharge valves closed, - the release of flammable vapour
the pump contents removed and the leading to fire/explosion
pump inerted before the repair is car- - the gas used for inerting will re-
ried out. duce the oxygen concentration and
may lead to asphyxiation
A. Identify hazards AND, in EACH - the use of excessive force to close
case, outline an associated risk valves leading to manual handling
with the preparation of the pump: injury.
2. In your safety role on an offshore - isolation of electrical power
oil production platform, you have - isolation of pipelines (various
been asked to take part in a risk means, such as blanks/spades) re-
assessment and subsequent proce- leasing stored energy
dures for the preparation and repair of
- the use of LOTO
a large, electrically-driven pump con-- allowing hot machinery to cool
taining a hot, flammable liquid. The - the use of barriers or fences to
pump needs to be stopped, the large segregate the work
suction and discharge valves closed, - the provision of safe access equip-
the pump contents removed and the ment such as scaffolding
pump inerted before the repair is car-- the issue of permits
ried out. - the use of PPE, such as respira-
tors, chemical suits
B. Outline control measures that - the use of trained and skilled per-
should be taken for the repair of the sonnel and the monitoring of the at-
pump mosphere for potentially flammable
conditions.
3. In your safety role on an offshore - the electrical isolator associated
oil production platform, you have with the electric motor;
been asked to take part in a risk
assessment and subsequent proce- - the inlet or outlet valves and the
1/8
, IOG1 Nebosh
Study online at https://quizlet.com/_1ke63w
dures for the preparation and repair of key control boxes within the control
a large, electrically-driven pump con- room
taining a hot, flammable liquid. The
pump needs to be stopped, the large
suction and discharge valves closed,
the pump contents removed and the
pump inerted before the repair is car-
ried out.
C. Identify locations where locks and
associated tags should be applied for
Lock Out, Tag Out (LOTO).
4. In your safety role on an offshore - the typical types of worker would
oil production platform, you have include operators, mechanical or
been asked to take part in a risk electrical technicians, contractors
assessment and subsequent proce- and supervisors.
dures for the preparation and repair of
a large, electrically-driven pump con-
taining a hot, flammable liquid. The
pump needs to be stopped, the large
suction and discharge valves closed,
the pump contents removed and the
pump inerted before the repair is car-
ried out.
D. Identify types of worker who may
attach personal locks within LOTO in
this situation.
5. Identify documents that could be - training records
provided by contractors in order to - proof of any qualifications held by
demonstrate their health and safety workers;
competence to an oil and gas industry - the existence of a health and safety
client policy, together with all the systems
for implementing it;
- evidence of previous jobs (recom-
mendations)
- Accident/Incident (Record/Histo-
2/8
