Escrito por estudiantes que aprobaron Inmediatamente disponible después del pago Leer en línea o como PDF ¿Documento equivocado? Cámbialo gratis 4,6 TrustPilot
logo-home
Document preview thumbnail
Vista previa 4 fuera de 46 páginas
Examen

EXTRON AV ASSOCIATE CERTIFICATION EXAM AND STUDY GUIDE LATEST ACTUAL EXAM 250 QUESTIONS AND CORRECT |ALREADY GRADED A+

Document preview thumbnail
Vista previa 4 fuera de 46 páginas

EXTRON AV ASSOCIATE CERTIFICATION EXAM AND STUDY GUIDE LATEST ACTUAL EXAM 250 QUESTIONS AND CORRECT |ALREADY GRADED A+ EXTRON AV ASSOCIATE CERTIFICATION EXAM AND STUDY GUIDE LATEST ACTUAL EXAM 250 QUESTIONS AND CORRECT |ALREADY GRADED A+

Vista previa del contenido

EXTRON AV ASSOCIATE CERTIFICATION EXAM AND
STUDY GUIDE LATEST 2024-2025 ACTUAL EXAM 250
QUESTIONS AND CORRECT |ALREADY GRADED A+
Which one of the following supports communication between subnets and across different networks, by
determining the next network point to which a packet is forwarded as its destination? -
ANSWERRouters


WANs cover wide geographical areas and are commonly used to link different locations together. -
ANSWER-TRUE


Which one of the following protocols is responsible for the actual delivery of data over a network? -
ANSWER-Transmission Control Protocol

192.168.100.101 is an example of which type of address? - ANSWER-IP Address



Which one of the following types of IP Addresses are automatically assigned to network devices using a
DHCP server? - ANSWER-Dynamic IP Address



Which one of the following OSI Reference layers provides logical IP addressing for all devices that
communicate over a network? - ANSWER-Network Layer 3



Which of the following network topologies daisy-chains the devices to a common medium where
information travels along a backbone? - ANSWER-Bus Topology



Category cable wire pairs are twisted together for which of the following purposes? - ANSWER-Cancel
out EMI from external sources



Which one of the following twisted pair wiring standards define the pinouts for a crossover cable
connection? - ANSWER-T568A to T568B

,When designing a network, which of the following is important to consider throughout the design
process? - ANSWER-All of the above



Which one of the following uses one-to-one transmission from one point in the network to another? -
ANSWER-Unicast


Which of the following defines the science or study of sound, how it's created, its ability to travel within
a space, and the way it's managed? - ANSWER-Acoustics



Which of the following represents a logarithmic ratio to measure the change in sound intensity or
electric signals? - ANSWER-Decibel (dB)



Which of the following has a ground wire, and carries analog signals as one hot wire and one cold wire in
reverse polarity to cancel noise and interference? - ANSWER-Balanced cables


Which of the following connector is commonly used for twisted pair cabling that carries digital audio
over the network? - ANSWER-RJ-45



Which of the following performs as a transducer, converting one form of energy to another, and is
classified based on how it captures sound? - ANSWER-Microphone



Which of the following is referred to as the safety zone that allows audio peaks to exceed the nominal
level without clipping? - ANSWER-Headroom



Which of the following is an example of dropping the sound levels for background music, to focus the
audio on an important voice-over announcement? - ANSWER-Ducking



Which of the following is the last link of the audio signal path? - ANSWER-Loudspeaker



Which of the following is the average rate of speed at which sound travels through air, measured at sea
level and 70F/20C degrees? - ANSWER-1128 feet/second (343 meters/second)

,The rate at which the sound vibrations repeat is called: - ANSWER-Frequency



Which of the following is related to the amount of energy that a sound wave carries? -
ANSWERAmplitude


Which of the following is a low voltage level that comes out of a microphone when someone speaks into
it? - ANSWER-Mic Level



Which of the following has two conductor wires, one for the hot audio signal, and one for ground? -
ANSWER-Unbalanced cables


Which of the following carries two independent channels for left and right audio, and creates the
impression of sound heard from various directions? - ANSWER-Stereo sound signals


When a microphone signal first enters a mixer, which of the following is used to control the input level of
the audio. - ANSWER-Gain



Which of the following is designed to capture spoken words limited to the speaker, commonly found on
podiums or in conference rooms and boardrooms? - ANSWER-Gooseneck microphone



An omnidirectional microphone pickup pattern has a coverage of: - ANSWER-360



Which of the following file types are part of the Moving Picture Experts Group 1, Audio Layer III encoding
techniques? - ANSWER-MP3



The human eye can differentiate individual picture frames at which of the following rates? -
ANSWER10-12 frames per second

, Which of the following projects a ray of light through a lens to display an image onto a surface? -
ANSWER-Projector


Which of the following is the smallest component of a digital image, composed of individual Red, Green,
and Blue - RGB color elements? - ANSWER-Pixels



Chroma Subsampling is a form of: - ANSWER-Compression



True or False: Progressive Scanning draws each line sequentially from left to right, creating a full image
frame in one pass from top to bottom. - ANSWER-TRUE



Which of the following describes how often the display can redraw the screen to show a new image? -
ANSWER-Refresh Rate


Which of the following interfaces renders images as micro packets similar to network data? -
ANSWERDisplayPort

Which of the following is used for connecting peripheral devices (keyboard, mouse) to computers, as
well as for power to charge portable devices? - ANSWER-USB



Which one of the following describes the relationship of width and height of an image? -
ANSWERAspect Ratio


Which one of the following measures an image's width and height using pixels? - ANSWER-Resolution



Which one of the following consists of thin organic layers between two conductors (transparent anode
and metallic cathode) that convert electric current into light? - ANSWER-OLED



Which one of the following is a reflective surface made up of thousands of tiny mirrors, each
representing a single pixel? - ANSWER-DLP

Información del documento

Subido en
10 de diciembre de 2024
Número de páginas
46
Escrito en
2024/2025
Tipo
Examen
Contiene
Preguntas y respuestas
$23.99

¿Documento equivocado? Cámbialo gratis Dentro de los 14 días posteriores a la compra y antes de descargarlo, puedes elegir otro documento. Puedes gastar el importe de nuevo.
Escrito por estudiantes que aprobaron
Inmediatamente disponible después del pago
Leer en línea o como PDF

Seller avatar
Los indicadores de reputación están sujetos a la cantidad de artículos vendidos por una tarifa y las reseñas que ha recibido por esos documentos. Hay tres niveles: Bronce, Plata y Oro. Cuanto mayor reputación, más podrás confiar en la calidad del trabajo del vendedor.
JAMES125
4.9
(3107)
Vendido
390
Seguidores
47
Artículos
3225
Última venta
4 días hace



Por qué los estudiantes eligen Stuvia

Creado por compañeros estudiantes, verificado por reseñas

Calidad en la que puedes confiar: escrito por estudiantes que aprobaron y evaluado por otros que han usado estos resúmenes.

¿No estás satisfecho? Elige otro documento

¡No te preocupes! Puedes elegir directamente otro documento que se ajuste mejor a lo que buscas.

Paga como quieras, empieza a estudiar al instante

Sin suscripción, sin compromisos. Paga como estés acostumbrado con tarjeta de crédito y descarga tu documento PDF inmediatamente.

Student with book image

“Comprado, descargado y aprobado. Así de fácil puede ser.”

Alisha Student

Preguntas frecuentes