QA301 CRAFTSMAN QUESTIONS &
ANSWERS(GRADED A+)
COMFLTFORCOMINST 4790.3 - ANSWERJoint fleet maintenance manual
Cleanliness requirements for Nuclear propulsion Plant Maintenance is located in
what reference? - ANSWERNAVSEA 0989-064-3000
What NSTM is Fasteners? - ANSWERNSTM 075
Tag out user manual? - ANSWERS0400-AD-URM-010/TUM
Quality Assurance is the responsibility of who? - ANSWEREveryone
What is the 1st basic maintenance principle? - ANSWERThe worker must have a
process that guides him or her in the performance of maintenance.
What is the 2nd basic maintenance principle? - ANSWERThe worker must be trained
so that work can be done safely and effectively.
What is the 3rd basic maintenance principle? - ANSWERThe worker must have the
proper technical direction.
What is the 4th basic maintenance principle? - ANSWERThe worker must have the
proper material.
What is the 5th basic maintenance principle? - ANSWERFor essential and critical
systems, confidence must be established by appropriate testing.
What is the fundamental rule of maintenance? - ANSWERTechnical specifications
must be met at all times.
Date of the USS Thresher Tragedy? - ANSWERApril 10th 1963
What happened on the USS Thresher? - ANSWERDeep dive off the coast of Maine.
Piping failure in one of the salt water systems.
What is OQE? - ANSWERRecords/forms of proof filled out by the craftsman that the
procedure was done correctly. Forms are kept for life onboard the ship.
Where are QA forms found? - ANSWERChapter 11 QA manual
What is QA form 1? - ANSWERMaterial Receipt Control Record
What program was developed due to the results of the USS Thresher? -
ANSWERSubmarine Safety Program. SUBSAFE
Date of the Space shuttle Challenger tragedy? - ANSWERJanuary 28th, 1986
, What happened to the Challenger? - ANSWERFailure of the pressure seal in the aft
field joint of the right solid rocket motor. Oring erosion and blow by
Date of Iwo Jima tragedy? - ANSWEROctober 30th 1990
What happened onboard the Iwo Jima? - ANSWERRequired fasteners were
replaced with mis-matched and incorrect material. High Temp and pressure forced
the bolts to fail forcing the valve bonnet assembly to separate from the body.
OQE stands for? - ANSWERObjective Quality Evidence
.
Purpose of QA form 1? - ANSWERTo doc. proper receipt, control and Level of
essentiality for controlled material.
What is QA form 2? - ANSWERMaterial ID/Control tag
Purpose of QA form 2? - ANSWER1. Receipt inspection, certification and traceability
of new material.
2. ID of SUBSAFE/level 1 SOC
What tag color is QA form 2? - ANSWERGreen
What is QA form 3? - ANSWERControlled Material Reject Tag
Purpose of QA Form 3? - ANSWERProvide visible evidence and ID of rejected
material.
What is QA form 14? - ANSWERSurveillance/monitoring/audit Discrepancy record
Purpose of QA form 14? - ANSWERnoted discrepancies during audits and
monitoring.
What is QA Form 17? - ANSWERTest and Inspection Record
Purpose of QA form 17? - ANSWERTest and inspection Record
What is QA form 26? - ANSWERHydrostatic/pneumatic test record
Purpose of QA Form 26? - ANSWERDocument Hydrostatic/Pneumatic Tests
QA Form 34 - ANSWERProvide a standard form document the assembly and
torqueing of Nuclear Level 1, SUBSAFE, and SOC mechanical joints
Who is overall responsible for the QA program? - ANSWERCO
Who is responsible to ensure people are properly qualed and tools available for
maintenance? - ANSWERWork Center Supervisor
ANSWERS(GRADED A+)
COMFLTFORCOMINST 4790.3 - ANSWERJoint fleet maintenance manual
Cleanliness requirements for Nuclear propulsion Plant Maintenance is located in
what reference? - ANSWERNAVSEA 0989-064-3000
What NSTM is Fasteners? - ANSWERNSTM 075
Tag out user manual? - ANSWERS0400-AD-URM-010/TUM
Quality Assurance is the responsibility of who? - ANSWEREveryone
What is the 1st basic maintenance principle? - ANSWERThe worker must have a
process that guides him or her in the performance of maintenance.
What is the 2nd basic maintenance principle? - ANSWERThe worker must be trained
so that work can be done safely and effectively.
What is the 3rd basic maintenance principle? - ANSWERThe worker must have the
proper technical direction.
What is the 4th basic maintenance principle? - ANSWERThe worker must have the
proper material.
What is the 5th basic maintenance principle? - ANSWERFor essential and critical
systems, confidence must be established by appropriate testing.
What is the fundamental rule of maintenance? - ANSWERTechnical specifications
must be met at all times.
Date of the USS Thresher Tragedy? - ANSWERApril 10th 1963
What happened on the USS Thresher? - ANSWERDeep dive off the coast of Maine.
Piping failure in one of the salt water systems.
What is OQE? - ANSWERRecords/forms of proof filled out by the craftsman that the
procedure was done correctly. Forms are kept for life onboard the ship.
Where are QA forms found? - ANSWERChapter 11 QA manual
What is QA form 1? - ANSWERMaterial Receipt Control Record
What program was developed due to the results of the USS Thresher? -
ANSWERSubmarine Safety Program. SUBSAFE
Date of the Space shuttle Challenger tragedy? - ANSWERJanuary 28th, 1986
, What happened to the Challenger? - ANSWERFailure of the pressure seal in the aft
field joint of the right solid rocket motor. Oring erosion and blow by
Date of Iwo Jima tragedy? - ANSWEROctober 30th 1990
What happened onboard the Iwo Jima? - ANSWERRequired fasteners were
replaced with mis-matched and incorrect material. High Temp and pressure forced
the bolts to fail forcing the valve bonnet assembly to separate from the body.
OQE stands for? - ANSWERObjective Quality Evidence
.
Purpose of QA form 1? - ANSWERTo doc. proper receipt, control and Level of
essentiality for controlled material.
What is QA form 2? - ANSWERMaterial ID/Control tag
Purpose of QA form 2? - ANSWER1. Receipt inspection, certification and traceability
of new material.
2. ID of SUBSAFE/level 1 SOC
What tag color is QA form 2? - ANSWERGreen
What is QA form 3? - ANSWERControlled Material Reject Tag
Purpose of QA Form 3? - ANSWERProvide visible evidence and ID of rejected
material.
What is QA form 14? - ANSWERSurveillance/monitoring/audit Discrepancy record
Purpose of QA form 14? - ANSWERnoted discrepancies during audits and
monitoring.
What is QA Form 17? - ANSWERTest and Inspection Record
Purpose of QA form 17? - ANSWERTest and inspection Record
What is QA form 26? - ANSWERHydrostatic/pneumatic test record
Purpose of QA Form 26? - ANSWERDocument Hydrostatic/Pneumatic Tests
QA Form 34 - ANSWERProvide a standard form document the assembly and
torqueing of Nuclear Level 1, SUBSAFE, and SOC mechanical joints
Who is overall responsible for the QA program? - ANSWERCO
Who is responsible to ensure people are properly qualed and tools available for
maintenance? - ANSWERWork Center Supervisor
