Structural Steel Design: Chapter 6 -
Compression Members
4.5D - <<<ANSWER>>>Maximum longitudinal pitch allowed
in a butt riveted joint
78.5 - <<<ANSWER>>>The permessible axile tensile stress in
mild steel power driven shop rivets
0.33 - <<<ANSWER>>>The ratio of the permissible tensile
stress in power driven shop rivets with respect to the yield stress
of mild steel
0.33 - <<<ANSWER>>>The ratio of permissible tensile stress
in bolts with diameter less then 20mm to the yield stress of mild
steel
0.53 - <<<ANSWER>>>The ratio of permissible tensile stress
in tension rods to the yield stress of mild steel
, 0.40 - <<<ANSWER>>>The ratio of permissible shear stress of
power driven field rivets to the yield stress of mild steel
0.43 - <<<ANSWER>>>The ratio of permissible shear stress of
power driven shop rivets to the yield stress of mild steel
0.33 - <<<ANSWER>>>The ratio of permissible shear stress of
hand driven rivets to the yield stress of mild steel
Intermediate transverse web stiffener -
<<<ANSWER>>>Stiffness used to improve the buckling
strength of a slender web due to shear
Load bearing stiffness - <<<ANSWER>>>Stiffeners used to
prevent local buckling of the web due to concentrated loading
Bearing stiffeners - <<<ANSWER>>>Stiffeners used to prevent
local crushing of the web due to concentrated loading
Torsional stiffeners - <<<ANSWER>>>Stiffeners used to
provide torsional restraint to beams and girders at support
Diagonal stiffeners - <<<ANSWER>>>Stiffeners used to
provide local reinforcement to a web under shear and bearing
Compression Members
4.5D - <<<ANSWER>>>Maximum longitudinal pitch allowed
in a butt riveted joint
78.5 - <<<ANSWER>>>The permessible axile tensile stress in
mild steel power driven shop rivets
0.33 - <<<ANSWER>>>The ratio of the permissible tensile
stress in power driven shop rivets with respect to the yield stress
of mild steel
0.33 - <<<ANSWER>>>The ratio of permissible tensile stress
in bolts with diameter less then 20mm to the yield stress of mild
steel
0.53 - <<<ANSWER>>>The ratio of permissible tensile stress
in tension rods to the yield stress of mild steel
, 0.40 - <<<ANSWER>>>The ratio of permissible shear stress of
power driven field rivets to the yield stress of mild steel
0.43 - <<<ANSWER>>>The ratio of permissible shear stress of
power driven shop rivets to the yield stress of mild steel
0.33 - <<<ANSWER>>>The ratio of permissible shear stress of
hand driven rivets to the yield stress of mild steel
Intermediate transverse web stiffener -
<<<ANSWER>>>Stiffness used to improve the buckling
strength of a slender web due to shear
Load bearing stiffness - <<<ANSWER>>>Stiffeners used to
prevent local buckling of the web due to concentrated loading
Bearing stiffeners - <<<ANSWER>>>Stiffeners used to prevent
local crushing of the web due to concentrated loading
Torsional stiffeners - <<<ANSWER>>>Stiffeners used to
provide torsional restraint to beams and girders at support
Diagonal stiffeners - <<<ANSWER>>>Stiffeners used to
provide local reinforcement to a web under shear and bearing
