CSST Prep – Questions With Complete Solutions
DOSH registration is required when... Right Ans - disturbing ACCM (>0.1%)
that exceeds 100 sq. ft.
ACM Right Ans - Asbestos-containing material, defined as any material
containing more than 1% asbestos. Used by EPA and FedOSHA
PACM Right Ans - Presumed Asbestos Containing Material (TSI or surfacing
from before 1980) by OSHA
PEL Right Ans - Permissible Exposure Limit (0.1 f/cc 8hr TWA)
Excursion Limit Right Ans - 1 f/cc per 30 min
Asbestos removal started in the... Right Ans - 1980s
Asbestos mineralogical groups, and types Right Ans - 1. Serpentine
(layered, curly)
-Chrysotile (white, long wavey, hollow, 95% of used asbestos)
2. Amphibole
-Amosite (brown, short, straight, brittle)
-Crocidolite (blue, long straight brittle, most lethal)
-Anthophylite
-Tremolite
-Actinolite
Latency Period Right Ans - time between exposure and symptoms/signs of
illness
3 major asbestos related diseases Right Ans - 1. Asbestosis (pulmonary
fibrosis, 15-20 yr latency, scarring of lung tissue)
2. Lung cancer (bronchogenic carcinoma, 20-40 yr latency)
3. Mesothelioma (20-50 yr latency, cancer of membrane lining outside of
lungs)
3 Categories of ACM defined by AHERA Right Ans - 1. Surfacing Material:
sprayed or troweled on or otherwise applied to structural surfaces. ex:
acoustic/decorative popcorn ceiling, fire proofing
, 2. Thermal Systems Insulation: applied to prevent heat loss or gain. ex: pipe
insulation, elbow mud, block insulation, aircell, paper wrap, boiler insulation,
etc.
3. Miscellaneous: Not TSI/surfacing. ex: floor tile, ceiling tile, paint, asbestos
cement.
Define HEPA Right Ans - High Efficiency Particulate Air (Filter).
Capable of trapping 99.97% of monodispersed particles 0.3 microns in
diameter or larger
4 Basic classifications of work by OSHA CFR 1926.1101 Right Ans - CLASS
I : removal of TSI/surfacing
CLASS II: removal of NOT TSI/surfacing (Miscellaneous)
CLASS III: removal of small amount of ACM as part of operations and
maintenance (must have alibi, 60"x60" glove bag)
CLASS IV: custodial work around nonfriable materials, designed for contact
but not disturbance of asbestos
Asbestos General Standard Right Ans - 29 CFR 1910.1001
Asbestos Construction Standard Right Ans - 29 CFR 1926.1101
5 EPA Accredited courses and durations Right Ans - Worker (4day)
Contractor/Supervisor (5day)
Inspector (3day)
Management Planner (2day)
Project Designer (3day)
NESHAP definitions for ACM Right Ans - CAT 1 non friable: asbestos
containing packings, gaskets, resilient floor covering, asphalt roofing products
>1%
CAT 2 non friable ACM: any material not CAT 1 >1% asbestos that when dry
cannot be crumbled, pulverized, or reduced to powder by hand pressure. ex:
cement siding, transite board shingles.
REGULATED ASBESTOS CONTAINING MATERIAL (RACM):
(a) friable asbestos material
(b) cat 1 non friable acm that has become friable
(c) cat 1 non friable acm that will be or has been subjected to sanding grinding
cutting or abrading
DOSH registration is required when... Right Ans - disturbing ACCM (>0.1%)
that exceeds 100 sq. ft.
ACM Right Ans - Asbestos-containing material, defined as any material
containing more than 1% asbestos. Used by EPA and FedOSHA
PACM Right Ans - Presumed Asbestos Containing Material (TSI or surfacing
from before 1980) by OSHA
PEL Right Ans - Permissible Exposure Limit (0.1 f/cc 8hr TWA)
Excursion Limit Right Ans - 1 f/cc per 30 min
Asbestos removal started in the... Right Ans - 1980s
Asbestos mineralogical groups, and types Right Ans - 1. Serpentine
(layered, curly)
-Chrysotile (white, long wavey, hollow, 95% of used asbestos)
2. Amphibole
-Amosite (brown, short, straight, brittle)
-Crocidolite (blue, long straight brittle, most lethal)
-Anthophylite
-Tremolite
-Actinolite
Latency Period Right Ans - time between exposure and symptoms/signs of
illness
3 major asbestos related diseases Right Ans - 1. Asbestosis (pulmonary
fibrosis, 15-20 yr latency, scarring of lung tissue)
2. Lung cancer (bronchogenic carcinoma, 20-40 yr latency)
3. Mesothelioma (20-50 yr latency, cancer of membrane lining outside of
lungs)
3 Categories of ACM defined by AHERA Right Ans - 1. Surfacing Material:
sprayed or troweled on or otherwise applied to structural surfaces. ex:
acoustic/decorative popcorn ceiling, fire proofing
, 2. Thermal Systems Insulation: applied to prevent heat loss or gain. ex: pipe
insulation, elbow mud, block insulation, aircell, paper wrap, boiler insulation,
etc.
3. Miscellaneous: Not TSI/surfacing. ex: floor tile, ceiling tile, paint, asbestos
cement.
Define HEPA Right Ans - High Efficiency Particulate Air (Filter).
Capable of trapping 99.97% of monodispersed particles 0.3 microns in
diameter or larger
4 Basic classifications of work by OSHA CFR 1926.1101 Right Ans - CLASS
I : removal of TSI/surfacing
CLASS II: removal of NOT TSI/surfacing (Miscellaneous)
CLASS III: removal of small amount of ACM as part of operations and
maintenance (must have alibi, 60"x60" glove bag)
CLASS IV: custodial work around nonfriable materials, designed for contact
but not disturbance of asbestos
Asbestos General Standard Right Ans - 29 CFR 1910.1001
Asbestos Construction Standard Right Ans - 29 CFR 1926.1101
5 EPA Accredited courses and durations Right Ans - Worker (4day)
Contractor/Supervisor (5day)
Inspector (3day)
Management Planner (2day)
Project Designer (3day)
NESHAP definitions for ACM Right Ans - CAT 1 non friable: asbestos
containing packings, gaskets, resilient floor covering, asphalt roofing products
>1%
CAT 2 non friable ACM: any material not CAT 1 >1% asbestos that when dry
cannot be crumbled, pulverized, or reduced to powder by hand pressure. ex:
cement siding, transite board shingles.
REGULATED ASBESTOS CONTAINING MATERIAL (RACM):
(a) friable asbestos material
(b) cat 1 non friable acm that has become friable
(c) cat 1 non friable acm that will be or has been subjected to sanding grinding
cutting or abrading