CWB Codes and Standards (Practice
Test Questions)CORRECT 100%
The AWS D1.1 Structural Welding Code-Steel - ANSWERincludes welding
procedure and performance qualification requirements
The CSA is one organization accredited by the Standards Council of Canada for
developing standards related to joining and inspection. Name another one. -
ANSWERCanadian General Standards Board (CGSB)
CSA S473 - ANSWERincludes a comprehensive fracture control plan.
Most standards are created by: - ANSWERvoluntary efforts
The function of standards can be said to: - ANSWEREducate, simplify, certify and
protect
T/F - "Generally the word "shall" in a standard means that the user of the standard is
obliged to satisfy the condition". - ANSWERTrue
CSA W59 allows for the use of what materials? - ANSWERcarbon steels and low-
alloy steels
Which code/standard does CSA B51 refer to for the qualification of welding
procedures? - ANSWERASME IX
In Canada, shop inspections of pressure vessels are performed by: - ANSWERan
inspector employed by the regulatory authority in the province of fabrication.
What are the three main categories of qualified personnel required by CSA W47.1
and CSA W47.2? - ANSWERWelding Engineer, Welding Supervisor, Welder
Which of the following codes/standards do not deal with fabrication, but include the
qualification of welding procedures and welding personnel? - ANSWERASME
Section IX
T/F - AWS D17.1 was developed in part to replace MIL-STD-1595 and MIL-STD-
2219. - ANSWERTrue
The CAN/CSA Standard N285.6 Series covers the qualification and welding
requirements for: - ANSWERthin walled zirconium tubing
T/F - CAN/CSA S473 introduces a Fracture Control Plan. - ANSWERTrue
AWS D1.1 does not allow for the pre-qualification of procedures welded with which
of the following? - ANSWERGMAW - Short Circuit and ESW
Test Questions)CORRECT 100%
The AWS D1.1 Structural Welding Code-Steel - ANSWERincludes welding
procedure and performance qualification requirements
The CSA is one organization accredited by the Standards Council of Canada for
developing standards related to joining and inspection. Name another one. -
ANSWERCanadian General Standards Board (CGSB)
CSA S473 - ANSWERincludes a comprehensive fracture control plan.
Most standards are created by: - ANSWERvoluntary efforts
The function of standards can be said to: - ANSWEREducate, simplify, certify and
protect
T/F - "Generally the word "shall" in a standard means that the user of the standard is
obliged to satisfy the condition". - ANSWERTrue
CSA W59 allows for the use of what materials? - ANSWERcarbon steels and low-
alloy steels
Which code/standard does CSA B51 refer to for the qualification of welding
procedures? - ANSWERASME IX
In Canada, shop inspections of pressure vessels are performed by: - ANSWERan
inspector employed by the regulatory authority in the province of fabrication.
What are the three main categories of qualified personnel required by CSA W47.1
and CSA W47.2? - ANSWERWelding Engineer, Welding Supervisor, Welder
Which of the following codes/standards do not deal with fabrication, but include the
qualification of welding procedures and welding personnel? - ANSWERASME
Section IX
T/F - AWS D17.1 was developed in part to replace MIL-STD-1595 and MIL-STD-
2219. - ANSWERTrue
The CAN/CSA Standard N285.6 Series covers the qualification and welding
requirements for: - ANSWERthin walled zirconium tubing
T/F - CAN/CSA S473 introduces a Fracture Control Plan. - ANSWERTrue
AWS D1.1 does not allow for the pre-qualification of procedures welded with which
of the following? - ANSWERGMAW - Short Circuit and ESW
