11/16/2024 10:16 AM
MFF Exam Study Guide.
Colissions on exit - answer✔-arch
-gently push off with open hands, dont grab anything
-maintain stability
-check handles and equipment
-continue freefall as planned
Spinning - answer✔-relax
-arch
-check hands and feet
-counter spin by turning in opposite direction
-maintain altitude awareness
Tumbling - answer✔-relax
-arch
-check hands and feet
-maintain altitude awareness
Entering a cloud or loss of visibility - answer✔-stop all movement
-maintain heading
-maintain altitude awareness
-pull at prescribed altitude even if you are still in the cloud
Lost or loose goggles - answer✔-make one attempt to replace them
-if unsuccessful squint eyes and continue free fall as planned
1|Page
, ©BRIGHTSTARS EXAM SOLUTIONS
11/16/2024 10:16 AM
-if unable to maintain altitude awareness wave off and pull
Altimeter failure/lost altimeter - answer✔-tap altimeter wrist to signal problem with instructor
-instructor will show you his altimeter and instruct you when to pull
-if you are alone in free fall and unable to maintain altitude awareness, wave off and pull
What are pull priorities - answer✔-pull
-never sacrifice altitude for stability
How many attempts should you make to clear a malfunction - answer✔-two
what are the two major types of malfunctions and describe each one of them by definition? -
answer✔-total: pull the main ripcord and nothing comes off your back
-partial: pull the main ripcord and something comes off your back, but canopy does not fully or
properly deploy
pack closure - answer✔-after pull, raise right shoulder and count to two
-if nothing happens raise right shoulder again and count to two
-if parachute fails to open perform cutaway procedures
horseshoe malfunction - answer✔-make no attempt to clear
-perform cutaway procedures
bag lock - answer✔-make no attempt to clear
-perform cutaway procedures
pilot chute hesitation - answer✔-after pull, raise right shoulder and count to two
-if nothing happens raise right shoulder again and count to two
-if parachute fails to open perform cutaway procedures
hung slider and snivels - answer✔-pull toggles to 100% brake position for 3-4 seconds
-release to 50% brake position
-if slider is still hung, repeat once
-If slider is above cascade point after two attempts to clear, perform cutaway procedures
-if slider is below cascade point, perform canopy controllability check
2|Page