Basic Hydraulics Questions And Answers
The ability of a fluid to penetrate into small clearances between closely fitted parts is determined by the fluid's - answer-Viscosity The overall efficiency of a hydraulic motor is defined as the - answer-Output horsepower divided by the fluid input Which of the following kinds of valves should be used in a hydraulic system to change the direction of motion of the cylinder? - answer-Directional control valve Peak hydraulic system demands are usually met by the use of a(n) - answer-Accumulator The flow rate of hydraulic fluid through piping or tubing is measured in - answer-gpm According to Bernoulli's Principle, when fluid flow increases in a system, the pressure - answer-Decreases Pressure is measured in __________ in the English system - answer-Pounds per square inch The force exerted by a double-acting piston is - answer-Less on the rod side Mechanical shock is controlled in a hydraulic cylinder by means of a - answer-Cushioning device Which of the following is NOT needed in order to calculate the work a hydraulic cylinder can do? - answer-Power A hydraulic fluid the exhibits little change in viscosity when heated is said to have a high - answer-viscosity index A hydraulic fluid must be able to do all of the following EXCEPT - answer-Compress easily A meter-out flow-control valve is used to regulate fluid flow from a(n) - answer-Actuator The best method of controlling hydraulic fluid contamination is the use of - answer-Good maintenance procedures An air breather is installed on a fluid reservoir to - answer-Vent the reservoir When the maximum allowable pressure drop of a filter is reached, the filter will - answer-Allow particules to pass through the medium A four-way valve that can operate in three positions is called a - answer-Closed crossover valve Pascal's law states that pressure exerted on a confined liquid - answer-is distributed equally throughout the liquid When a hydraulic cylinder is added to an existing system, be sure that the - answer-Pump capacity is adaquate The seperation of contaminants from hydraulic fluid in a reservoir is aided by - answer-Slow fluid movement Safe working pressures of hydraulic piping are based on providing a safety factor of - answer-6 What characteristic of a fluid does the term "specific gravity" descibe? - answer-Density Straight-line mechanical force is created by a - answer-Hydraulic cylinder Which of the following statements about hydraulic motors is true? - answer-They are all positive-displacement types Which of the following is NOT a type of gear pump? - answer-Vane Which of the following, when added to hydraulic fluid, will limit oxidation? - answer-A chemical inhibitor A cylinder in which the retracting stroke is the power stroke is called a - answer-Pull-type cylinder Internal gear pumps normally are used in applications that have - answer-Pressures of less than 1000 psi A disadvantage of using hose in hydraulic systems instead of piping or tubing is that the hose - answer-Is less permanant Surface filter media made of sintered metal powders are used in high-pressure systems because of their - answer-Thick mass A cresent-shaped seperator is used on some ________ gear motors - answer-Internal The
Información del documento
- Subido en
- 4 de noviembre de 2024
- Número de páginas
- 4
- Escrito en
- 2024/2025
- Tipo
- Examen
- Contiene
- Preguntas y respuestas