Solution
When approaching a railroad crossing that had gates lowered with signals flashing
and bells ringing, you should stop and wait until the gates are ______, the signals
______ flashing, and the bells stop ringing - Answer: Raised, stop, ringing
What do you do at an intersection with a flashing red light - Answer: Stop, then
proceed when clear
A double yellow line in the middle of a two lane road means - Answer: No passing
in either direction
When stopped at a red signal light, which then changes to green, you should -
Answer: Look before going
Page 1 of 14
, A solid yellow line next to a broken yellow line means that vehicles next to the
broken line - Answer: May pass when safe
When driving in city traffic you should check traffic signals at least - Answer: One
block ahead
You must stop at the intersection ahead. Just before the intersection there are
railroad tracks, you should - Answer: Stop before you cross the railroad tracks
then make sure you have room to completely cross the tracks
When preparing to make a three point turnaround, you should first - Answer: Pull
to the right and stop
When a vehicle blocks your view of the road ahead, it is best to - Answer: Follow
at a greater distance than usual
If you must leave the roadway at a high speed and no open space is available, you
should - Answer: Steer for something soft, take foot of accelerator, control
steering
The best way to keep from getting involved in emergency driving situations is to -
Answer: Continually search for hazards, scan
The most dangerous type of crash is a ______ crash - Answer: Head-on
Page 2 of 14