FIRE apparatus Driver Operator-Pumper
1. 3 items that must have occurred prior to raising the cab:
-All loose items in cab secured
-All cab doors securely closed
-Adequate front and overhead clearance
2. 2 true statements about inverters: -
inverters output is limited to less than 1,500 watts
- Inverters are quiet compared to generators
3. 3 expectations to the rule that all Personnel should be seated and wearing
seatbelts before an emergency vehicle begins moving.: -
loading the hose back onto the fire
- performing training for personnel learning to drive the tiller portion
of the tractor drawn aerial apparatus
- providing patient care in the back of an ambulance
4. 4 steps for passing through a straight section of road or Highway.: -
maintain apparatus speed
- check the side street or roads
1/4
, - check for oncoming traffic
- check the side view mirrors
5. identify the true statement about a fire apparatus with automatic transmis-
sion.:
gives you the option of selecting a gear
6. all of the following statements about driving a fire apparatus through
areas of restrictive horizontal vertical clearance are true EXCEPT.:
use the appropri- ate turn signal.
7. identify three things you should do when turning fire apparatus 180
de- grees.:
-use the side view mirrors equipped on the fire apparatus.
- make sure you can see your spotter
- be aware of any extractions in your line of travel
8. NFPA standard 1002 requires a driver / operator operate the fire apparatus
over a predetermined route on public roadway that incorporates all the
follow- ing EXCEPT.:
2 through intersections & one intersection that requires you to stop
2/4
1. 3 items that must have occurred prior to raising the cab:
-All loose items in cab secured
-All cab doors securely closed
-Adequate front and overhead clearance
2. 2 true statements about inverters: -
inverters output is limited to less than 1,500 watts
- Inverters are quiet compared to generators
3. 3 expectations to the rule that all Personnel should be seated and wearing
seatbelts before an emergency vehicle begins moving.: -
loading the hose back onto the fire
- performing training for personnel learning to drive the tiller portion
of the tractor drawn aerial apparatus
- providing patient care in the back of an ambulance
4. 4 steps for passing through a straight section of road or Highway.: -
maintain apparatus speed
- check the side street or roads
1/4
, - check for oncoming traffic
- check the side view mirrors
5. identify the true statement about a fire apparatus with automatic transmis-
sion.:
gives you the option of selecting a gear
6. all of the following statements about driving a fire apparatus through
areas of restrictive horizontal vertical clearance are true EXCEPT.:
use the appropri- ate turn signal.
7. identify three things you should do when turning fire apparatus 180
de- grees.:
-use the side view mirrors equipped on the fire apparatus.
- make sure you can see your spotter
- be aware of any extractions in your line of travel
8. NFPA standard 1002 requires a driver / operator operate the fire apparatus
over a predetermined route on public roadway that incorporates all the
follow- ing EXCEPT.:
2 through intersections & one intersection that requires you to stop
2/4
