• ¿Documento equivocado? Cámbialo gratis
  • Escrito por estudiantes que aprobaron
  • Inmediatamente disponible después del pago
  • Leer en línea o como PDF
Vender
¿Dónde estudias?
Tu idioma
Document preview thumbnail
Vista previa 1 fuera de 4 páginas
Examen

Masonry Study Guide with Complete Solutions

Document preview thumbnail
Vista previa 1 fuera de 4 páginas

Masonry Study Guide with Complete Solutions

Vista previa del contenido

Masonry Study Guide with Complete Solutions
Define "Thumbprint Hard" and how it relates to tooling and striking the joint. - ANSWER-
Put thumb against the mortar. If thumb has mortar on it is too wet to tool. Clean means
the joint is ready to strike. Most likely to occur at the end of the day at the top of the
wall.

Define Class A - ANSWER-Meet standards of the manufacture or ASTM specs. Match
the Master Panel when viewed from 20 feet. Free from blemishes and within proper
dimensional tolerance.

Define Class B - ANSWER-Defects including off color, crack, or chip improper
dimensions or warping. Defects do not affect structural properties. Less costly than
Class A. Manufacture will generally advise you of defects and savings.

Define Class C - ANSWER-Known as culls or backup brick. Generally, do not meet
manufactures or ASTM specs. Maybe used for fill-in and in unexposed areas of
construction. Culls sold at discount

Define hollow unit - ANSWER-a masonry unit whose net cross-sectional area in every
plane, parallel to the bearing surface, is less than 75% of the gross cross-sectional area
in the same plane.

Define LB - ANSWER-suitable for general use in masonry where not exposed to frost
action, or for use in exposed masonry where protected by a facing of 3'' or more of
stone, brick, or masonry.

Define LBX - ANSWER-suitable for general use in masonry construction and adapted
for use in masonry exposed to weathering provided that they are burned to the normal
maturity of the clay.

Define Modular Unit - ANSWER-Their specific dimensions or modular dimensions are
such that nominal measurements center to center of mortar joints will be equal to one or
more standard 4"

Define solid unit - ANSWER-a masonry unit whose net cross-section is 75% or more of
the gross cross-sectional area in the same plane.

Define the term "Course" - ANSWER-One row of masonry units

Define the term "moisture control unit" - ANSWER-provide a method of limiting drying
shrinkage of units in masonry walls in regardless of the shrinkage properties of the
units.

Define the term "Wythe" - ANSWER-A vertical section of a wall one brink thick

Información del documento

Subido en
5 de octubre de 2024
Número de páginas
4
Escrito en
2024/2025
Tipo
Examen
Contiene
Preguntas y respuestas
$10.99

¿Documento equivocado? Cámbialo gratis Dentro de los 14 días posteriores a la compra y antes de descargarlo, puedes elegir otro documento. Puedes gastar el importe de nuevo.
Escrito por estudiantes que aprobaron
Inmediatamente disponible después del pago
Leer en línea o como PDF

Seller avatar
Los indicadores de reputación están sujetos a la cantidad de artículos vendidos por una tarifa y las reseñas que ha recibido por esos documentos. Hay tres niveles: Bronce, Plata y Oro. Cuanto mayor reputación, más podrás confiar en la calidad del trabajo del vendedor.
CLOUNDLite
3.9
(132)
Vendido
670
Seguidores
389
Artículos
12460
Última venta
1 día hace



Por qué los estudiantes eligen Stuvia

Creado por compañeros estudiantes, verificado por reseñas

Calidad en la que puedes confiar: escrito por estudiantes que aprobaron y evaluado por otros que han usado estos resúmenes.

¿No estás satisfecho? Elige otro documento

¡No te preocupes! Puedes elegir directamente otro documento que se ajuste mejor a lo que buscas.

Paga como quieras, empieza a estudiar al instante

Sin suscripción, sin compromisos. Paga como estés acostumbrado con tarjeta de crédito y descarga tu documento PDF inmediatamente.

Student with book image

“Comprado, descargado y aprobado. Así de fácil puede ser.”

Alisha Student

Preguntas frecuentes