Testout Network Pro Questions With
Solutions 100% Solved
You run a small network for your business that has a single router connected to the internet and a
single switch. You keep sensitive doc.
What should you use for this situation? VLAN
You manage a single subnet with three switches. The switches are connected to provide
redundant paths between the switches.
Which feature prevents switching loops and ensures there is only a single active patch between
any two switches? Spanning tree
Which feature prevents switching loops and ensures there is only a single active path between
any two switches? spanning trees
A user reports that network access from her workstation is very slow. The problem does not seem
to be affecting any other users.
Which of the following conditions is the most likely cause? Duplex mismatch
, Testout Network Pro Questions With
Solutions 100% Solved
You manage a local area network with several switches. A new employee has started today so
you connect her workstation to a switch port.
Which of the following is the most likely cause of the problem? Incorrect VLAN
assignment
You manage a network with multiple switches. You find that your switches are experiencing
heavy broadcast storms.
Which of the following will help reduce the effects of a broadcast storm? Enable spanning
tree on the switches
Which of the following solutions would you implement to eliminate switching loops?
spanning tree
While viewing the status of the interfaces on a Cisco switch, you see abnormally large of
oversized ethernet frames being received on one interface. This interface is connected to a
workstation located on the 2nd floor.
What could be causing this to happen? The workstation's network board is jabbering
, Testout Network Pro Questions With
Solutions 100% Solved
The network board in a workstation is currently configured as follows: show running-
config interface
show interface
You manage a single subnet with three switches. The switches are connected to provide
redundant paths between the switches.
Which feature allows the switches to pass VLAN traffic between the switches? Trunking
You manage a network with two switches. The switches are connected together through their
Gigabit Ethernet uplink ports.
You define VLAN 1 and VLAN 2 on each switch. A device on the first switch in VLAN 1 needs
to communicate with a device on the second switch also in VLAN 1.
What should you configure to allow communication between these two devices through the
switches? Trunking
When configuring VLANs on a switch, what type of switch ports are members of all VLANs
defined on the switch? Trunk Ports
, Testout Network Pro Questions With
Solutions 100% Solved
Computers A and B are on the same VLAN and are separated by two switches, as shown in the
exhibit. Computer A sends a Fram to Computer B.
Which of the following best describes the composition of the frame as it travels from A to B?
Computer A sends a normal frame. The first switch appends a VLAN ID to the frame. The
second switch removes the VLAN ID before forwarding it to Computer B.
Which of the following statements accurately describes a VLAN ID? Switches append a
VLAN ID to the header of each frame to identify the virtual network to which it belongs.
CSMA/CD The media access control method of all Ethernet networks is
___________________.
The device listens to determine if the transmission media is free. A network is connected
following the IEEE 802.3 specifications. Which of the following best describes when a device
can transmit messages?
10BaseT & 1000BaseT Which of the following use the CSMA/CD access method? Select
all that apply.
Solutions 100% Solved
You run a small network for your business that has a single router connected to the internet and a
single switch. You keep sensitive doc.
What should you use for this situation? VLAN
You manage a single subnet with three switches. The switches are connected to provide
redundant paths between the switches.
Which feature prevents switching loops and ensures there is only a single active patch between
any two switches? Spanning tree
Which feature prevents switching loops and ensures there is only a single active path between
any two switches? spanning trees
A user reports that network access from her workstation is very slow. The problem does not seem
to be affecting any other users.
Which of the following conditions is the most likely cause? Duplex mismatch
, Testout Network Pro Questions With
Solutions 100% Solved
You manage a local area network with several switches. A new employee has started today so
you connect her workstation to a switch port.
Which of the following is the most likely cause of the problem? Incorrect VLAN
assignment
You manage a network with multiple switches. You find that your switches are experiencing
heavy broadcast storms.
Which of the following will help reduce the effects of a broadcast storm? Enable spanning
tree on the switches
Which of the following solutions would you implement to eliminate switching loops?
spanning tree
While viewing the status of the interfaces on a Cisco switch, you see abnormally large of
oversized ethernet frames being received on one interface. This interface is connected to a
workstation located on the 2nd floor.
What could be causing this to happen? The workstation's network board is jabbering
, Testout Network Pro Questions With
Solutions 100% Solved
The network board in a workstation is currently configured as follows: show running-
config interface
show interface
You manage a single subnet with three switches. The switches are connected to provide
redundant paths between the switches.
Which feature allows the switches to pass VLAN traffic between the switches? Trunking
You manage a network with two switches. The switches are connected together through their
Gigabit Ethernet uplink ports.
You define VLAN 1 and VLAN 2 on each switch. A device on the first switch in VLAN 1 needs
to communicate with a device on the second switch also in VLAN 1.
What should you configure to allow communication between these two devices through the
switches? Trunking
When configuring VLANs on a switch, what type of switch ports are members of all VLANs
defined on the switch? Trunk Ports
, Testout Network Pro Questions With
Solutions 100% Solved
Computers A and B are on the same VLAN and are separated by two switches, as shown in the
exhibit. Computer A sends a Fram to Computer B.
Which of the following best describes the composition of the frame as it travels from A to B?
Computer A sends a normal frame. The first switch appends a VLAN ID to the frame. The
second switch removes the VLAN ID before forwarding it to Computer B.
Which of the following statements accurately describes a VLAN ID? Switches append a
VLAN ID to the header of each frame to identify the virtual network to which it belongs.
CSMA/CD The media access control method of all Ethernet networks is
___________________.
The device listens to determine if the transmission media is free. A network is connected
following the IEEE 802.3 specifications. Which of the following best describes when a device
can transmit messages?
10BaseT & 1000BaseT Which of the following use the CSMA/CD access method? Select
all that apply.
