IPC-A-610H 1 General - Vocabulary Only- Questions and
Answers
Meniscus Correct Ans-component coating that extends past the seating plane of the
component
noncommon conductors Correct Ans-conductors that do not have the same function
nonfunctional land Correct Ans-land not electrically connected to the conductive pattern
on its layer
pin-in-paste Correct Ans-another name for intrusive solder
solder balls Correct Ans-spheres of solder material that remain after soldering process
Standard Industry Practice (SIP) Correct Ans-also "Industry Standard Process (ISP)";
solution, practice, or technique commonly used and accepted by the industry as superior to
other alternatives
stress relief Correct Ans-slack in a lead or wire to minimize mechanical stress
supplier Correct Ans-provides Manufacturer with components and materials
, IPC-A-610H 1 General - Vocabulary Only- Questions and
Answers
tempered leads Correct Ans-heat treated to increase hardness
wire overLAP Correct Ans-wrapped more than 360 degrees and *DOES NOT* remain in
contact with terminal post
wire overWRAP Correct Ans-wrapped more than 360 degrees and *DOES* remain in
contact with terminal post
User Correct Ans-customer/end user;
has authority to define equipment class, variations and restrictions to IPC-A-610 requirements
requirements flowdown Correct Ans-When contractually required, the requirements of
IPC-A-610 shall be imposed on all applicable subcontracts, assembly drawings, documentation
and purchase orders.
personnel proficiency Correct Ans-All instructors, operators, and inspection personnel
must be proficient in the tasks to be performed.
Objective evidence of that proficiency must be maintained and be available for review.
Supervised on the job training is acceptable until proficiency is demonstrated.
primary side Correct Ans-defined by master drawing;
typically most complex side;
Answers
Meniscus Correct Ans-component coating that extends past the seating plane of the
component
noncommon conductors Correct Ans-conductors that do not have the same function
nonfunctional land Correct Ans-land not electrically connected to the conductive pattern
on its layer
pin-in-paste Correct Ans-another name for intrusive solder
solder balls Correct Ans-spheres of solder material that remain after soldering process
Standard Industry Practice (SIP) Correct Ans-also "Industry Standard Process (ISP)";
solution, practice, or technique commonly used and accepted by the industry as superior to
other alternatives
stress relief Correct Ans-slack in a lead or wire to minimize mechanical stress
supplier Correct Ans-provides Manufacturer with components and materials
, IPC-A-610H 1 General - Vocabulary Only- Questions and
Answers
tempered leads Correct Ans-heat treated to increase hardness
wire overLAP Correct Ans-wrapped more than 360 degrees and *DOES NOT* remain in
contact with terminal post
wire overWRAP Correct Ans-wrapped more than 360 degrees and *DOES* remain in
contact with terminal post
User Correct Ans-customer/end user;
has authority to define equipment class, variations and restrictions to IPC-A-610 requirements
requirements flowdown Correct Ans-When contractually required, the requirements of
IPC-A-610 shall be imposed on all applicable subcontracts, assembly drawings, documentation
and purchase orders.
personnel proficiency Correct Ans-All instructors, operators, and inspection personnel
must be proficient in the tasks to be performed.
Objective evidence of that proficiency must be maintained and be available for review.
Supervised on the job training is acceptable until proficiency is demonstrated.
primary side Correct Ans-defined by master drawing;
typically most complex side;
