3cx Basic Certification Exam Rated A+ 2024
... Ports can not be tested from within the PBX. - ANSWER-TCP
3CX can be installed on a VM which platforms are recommended? - ANSWER-Hyper V,
ESXi, KVM, XenServer
3CX can only be installed on OS's that use which architecture? - ANSWER-64 bit
3CX offers three types of license keys... - ANSWER-Standard, Pro, Enterprise
3CX PBX requires ... NAT - ANSWER-Full Cone
3CX requires a ... in order to be setup - ANSWER-FQDN
3CX Webmeeting requires that the HTTPS Port is open for TCP traffic, which port is
this? - ANSWER-5001
If IPv6 is used ... rules are needed - ANSWER-Firewall
If you are using antivirus software you should - ANSWER-Add exclusion for 3cx folders
and network traffic
If you want to use the 3CX app or use an SBC you will need to open the HTTPS port.
The default TCP port is? - ANSWER-5001
If you want to use the 3CX app or use an SBC you will need to open the PBX tunnel
port. The default TCP/UDP port is? - ANSWER-5090
IPv4 and ... are supported by 3CX - ANSWER-IPv6
IPv6 ... (NAT) is not supported by 3CX - ANSWER-Masquerading
It is recommended to ... SIP ALG - ANSWER-Disable
NAT can also be used to limited who can access the server using? - ANSWER-ACL
NAT translates ... IPv4 IP addresses to ... private IP adresses - ANSWER-Public,
private
On the dashbard of the 3CX Management console we can check to see if the ... has
been configured correctly. - ANSWER-Firewall
Port ... TCP is used to provision IP phones - ANSWER-5001
... Ports can not be tested from within the PBX. - ANSWER-TCP
3CX can be installed on a VM which platforms are recommended? - ANSWER-Hyper V,
ESXi, KVM, XenServer
3CX can only be installed on OS's that use which architecture? - ANSWER-64 bit
3CX offers three types of license keys... - ANSWER-Standard, Pro, Enterprise
3CX PBX requires ... NAT - ANSWER-Full Cone
3CX requires a ... in order to be setup - ANSWER-FQDN
3CX Webmeeting requires that the HTTPS Port is open for TCP traffic, which port is
this? - ANSWER-5001
If IPv6 is used ... rules are needed - ANSWER-Firewall
If you are using antivirus software you should - ANSWER-Add exclusion for 3cx folders
and network traffic
If you want to use the 3CX app or use an SBC you will need to open the HTTPS port.
The default TCP port is? - ANSWER-5001
If you want to use the 3CX app or use an SBC you will need to open the PBX tunnel
port. The default TCP/UDP port is? - ANSWER-5090
IPv4 and ... are supported by 3CX - ANSWER-IPv6
IPv6 ... (NAT) is not supported by 3CX - ANSWER-Masquerading
It is recommended to ... SIP ALG - ANSWER-Disable
NAT can also be used to limited who can access the server using? - ANSWER-ACL
NAT translates ... IPv4 IP addresses to ... private IP adresses - ANSWER-Public,
private
On the dashbard of the 3CX Management console we can check to see if the ... has
been configured correctly. - ANSWER-Firewall
Port ... TCP is used to provision IP phones - ANSWER-5001