Basic Orientation Plus
What is the most frequently cited OSHA violation? - ANSWER Fall Protection
What key elements are essential to recognizing hazards and reducing or eliminating
workplace hazards? - ANSWER Management commitment and employee
involvement
You are encouraged to ask your coworkers/supervisor for information whenever you
have a problem or are in doubt about what to do on a job? - ANSWER True
It is your responsibility to follow all safety regulations, inform your employer of any
unsafe condition; report all injuries no matter how minor they seem and wear the
proper personal protective equipment? - ANSWER True
The OSHA standard that addresses the requirements for preventing and lessening
the results of a bad release of toxic, reactive, flammable, or highly explosive
hazardous chemicals from a process - ANSWER Process safety management
Standard
The process Hazard Analysis (PHA) is one of the most important parts of the PSM
program. PHAs are used to identify and evaluate major processes and ensure they
are - ANSWER Evaluated, Controlled, and Identified
In the PSM standard OSHA states employees must be trained if they work with
highly hazardous chemicals. - ANSWER True
Facilities are not permitted to control your entrance and exit in covered process
areas. - ANSWER False
What should be your first concern from the moment you enter the work site? -
ANSWER Safety
Under the Stop Work Authority, you have the right and obligation to stop a work
activity if you have reason to believe your own safety or a coworkers safety is in
jeopardy or if the work plan is not clearly established or understood . - ANSWER
True
What's needed in order to operate a plant-owned vehicle or mobile equipment while
at a facility - ANSWER qualified only authorized only
What type of work permits you may encounter on the job - ANSWER safe work
permits confined space entry permits, hot work permits, line entry or line breaking
permits, lockout/tagout permits
if you are replacing a piece of equipment the new one should be the same as the
one being removed. If its not you should find out whether the change was on
purpose. what is this called - ANSWER Management of change
What is the most frequently cited OSHA violation? - ANSWER Fall Protection
What key elements are essential to recognizing hazards and reducing or eliminating
workplace hazards? - ANSWER Management commitment and employee
involvement
You are encouraged to ask your coworkers/supervisor for information whenever you
have a problem or are in doubt about what to do on a job? - ANSWER True
It is your responsibility to follow all safety regulations, inform your employer of any
unsafe condition; report all injuries no matter how minor they seem and wear the
proper personal protective equipment? - ANSWER True
The OSHA standard that addresses the requirements for preventing and lessening
the results of a bad release of toxic, reactive, flammable, or highly explosive
hazardous chemicals from a process - ANSWER Process safety management
Standard
The process Hazard Analysis (PHA) is one of the most important parts of the PSM
program. PHAs are used to identify and evaluate major processes and ensure they
are - ANSWER Evaluated, Controlled, and Identified
In the PSM standard OSHA states employees must be trained if they work with
highly hazardous chemicals. - ANSWER True
Facilities are not permitted to control your entrance and exit in covered process
areas. - ANSWER False
What should be your first concern from the moment you enter the work site? -
ANSWER Safety
Under the Stop Work Authority, you have the right and obligation to stop a work
activity if you have reason to believe your own safety or a coworkers safety is in
jeopardy or if the work plan is not clearly established or understood . - ANSWER
True
What's needed in order to operate a plant-owned vehicle or mobile equipment while
at a facility - ANSWER qualified only authorized only
What type of work permits you may encounter on the job - ANSWER safe work
permits confined space entry permits, hot work permits, line entry or line breaking
permits, lockout/tagout permits
if you are replacing a piece of equipment the new one should be the same as the
one being removed. If its not you should find out whether the change was on
purpose. what is this called - ANSWER Management of change
