• ¿Documento equivocado? Cámbialo gratis
  • Escrito por estudiantes que aprobaron
  • Inmediatamente disponible después del pago
  • Leer en línea o como PDF
Vender
¿Dónde estudias?
Tu idioma
Document preview thumbnail
Vista previa 3 fuera de 19 páginas
Examen

Millwright Level Final Exam

Document preview thumbnail
Vista previa 3 fuera de 19 páginas

MILLWRIGHT LEVEL FINAL EXAM

Vista previa del contenido

MILLWRIGHT LEVEL FINAL EXAM


On a pedestal grinder, the gap between the grinding wheel and work rest should not
exceed: - ANSWER 1/8 inch

The kind of abrasive material used in grinding wheels for general purpose
applications is: - ANSWER aluminum oxide

A blotter is used on a grinding wheel to: - ANSWER protect the flanges from the
abrasize grit, display information about the wheel and compensate for the uneven
surfaces on the wheel

Flanges should at least be: - ANSWER 1/3 the diameter of the wheel

The best wheel to use for cleaning scale and dirt off a workpiece is the: - ANSWER
wire wheel

What is a natural abrasive? - ANSWER made of natural material rather than
synthetic

Under properties of abrasives, to what does the term hardness refer? - ANSWER
ability of a material to scratch or penetrate another material

The ____ is the part of the wheel that holds the grains together - ANSWER bond

Markings for the wheel identification can be found on the _______ - ANSWER
Blotter

What is the recommended speed to run a grinding wheel? - ANSWER Never run it
faster that the max RPM of the grinding wheel

How should you start a grinder? - ANSWER Stand off to the side and wait a full
minute

Is 46 or 60 the coarser grit? - ANSWER 46

What are the 2 most commonly used abrasive materials? - ANSWER Aluminum
oxide and silicone carbide

For what purpose is the diamond dresser used? - ANSWER When a very fine finish
is required

What is the purpose of ring test? - ANSWER to check for cracks

If a grinding wheel makes a ringing sound what does that mean? - ANSWER wheel
is not cracked

,What is the purpose of truing a grinding wheel? - ANSWER Restores the shape of
the wheel and makes the outer surface of the wheel concentric with its bore

An out of balance wheel: - ANSWER vibrates

Belt grinders are useful for: - ANSWER quickly deburring and chamfering a
workpiece

What is the purpose of a GFCI? - ANSWER Senses drop in current and switches
power off

The kind of abrasive material use in grinding wheels for general purpose application
is: - ANSWER aluminum oxide

Is it safe to carry a portable grinder by the power cord? - ANSWER False

Is it safe to use standard sockets with electric impact wrenches - ANSWER False

The larger the power drill, the slower the RPMs and the higher the torque - ANSWER
True

Can you use conventional drill bits with a hammer drill? Why or why not? - ANSWER
Yes of the hammer drill has a switch to turn off hammer action

Most cordless drills have torque control - ANSWER True

Prolonged use of power or air tools can cause carpal tunnel sydrome - ANSWER
True

Is it safe to run an impact wrench with a universal joint and socket attached -
ANSWER No because it may throw off attachments

What conditions would you use a GFCI - ANSWER Wet conditions

What 3 things does a GFCI protect: - ANSWER 1. Overload 2. Overcurrent 3.
Ground fault protection

A GFCI prevents all electrical shocks - ANSWER False

Higher voltage on a battery means: - ANSWER Greater power of tool

What type of power load must be used in the low velocity tool? Why? - ANSWER
Power load with a crimped end must be used cause high power load would get
lodged in the tool

6 colours ranging from lowest strength to highest strength for power load are: -
ANSWER 1. Grey 2. Brown 3. Green 4. Yellow 5. Red 6. Purple

, Power loads should not be carried loosely in pockets or aprons. Why? - ANSWER
Could be set off causing serious injury or death

Fasteners used in explosive actuated tools are: - ANSWER Manufactured from
special steel and tempered

A drive pin is a fastener used to: - ANSWER Permanently attach one material to
another

What is base material? - ANSWER Material which the fastener shank is driven into

To determine the sustainability of a base material, use a fastener as a centre punch
struck by a single average hammer blow. If the fastener is blunted ( meaning it can't
fasten) the material is too: - ANSWER Hard

To determine the sustainability of a base material, use a fastener as a centre punch
struck by a single average hammer blow. If the fastener penetrates easily, do not
fasten because the material is too: - ANSWER Soft

To determine the sustainability of a base material, use a fastener as a centre punch
struck by a single average hammer blow. If the material cracks or shatters, do not
fasten because the material is too: - ANSWER Brittle

A threaded knurled pin is designed for what material - ANSWER Mild steel

To be a qualified operator of an explosive actuated tool you must posses: -
ANSWER training in the use of each tool and familiarity with local safety regulations

OH&S states that operators of explosive actuate tools should always wear: -
ANSWER Eye protection

If a tool is found to be defective, you should: - ANSWER Mark it defective and call a
service representative

According to OH&S, what safety equipment is required when using an explosive
actuate tool in a confined area such as a small room? - ANSWER ear plugs and eye
protection

Who is responsible if an accident occurs as a result of an unattended explosive
actuated tool? - ANSWER The operator

Should an explosive actuated tool be used in explosive or flammable area? -
ANSWER No

How often should an explosive actuated tool be cleaned under normal working
conditions? - ANSWER It should be cleaned daily or when it becomes sluggish

How much oil should be added to the tool parts after cleaning? - ANSWER None

What part requires replacement most often in a low velocity tool? - ANSWER Buffer

Información del documento

Subido en
10 de septiembre de 2024
Número de páginas
19
Escrito en
2024/2025
Tipo
Examen
Contiene
Preguntas y respuestas
$18.49

¿Documento equivocado? Cámbialo gratis Dentro de los 14 días posteriores a la compra y antes de descargarlo, puedes elegir otro documento. Puedes gastar el importe de nuevo.
Escrito por estudiantes que aprobaron
Inmediatamente disponible después del pago
Leer en línea o como PDF

Seller avatar
Los indicadores de reputación están sujetos a la cantidad de artículos vendidos por una tarifa y las reseñas que ha recibido por esos documentos. Hay tres niveles: Bronce, Plata y Oro. Cuanto mayor reputación, más podrás confiar en la calidad del trabajo del vendedor.
PREPPERFECT
4.7
(3481)
Vendido
483
Seguidores
62
Artículos
16598
Última venta
13 horas hace



Por qué los estudiantes eligen Stuvia

Creado por compañeros estudiantes, verificado por reseñas

Calidad en la que puedes confiar: escrito por estudiantes que aprobaron y evaluado por otros que han usado estos resúmenes.

¿No estás satisfecho? Elige otro documento

¡No te preocupes! Puedes elegir directamente otro documento que se ajuste mejor a lo que buscas.

Paga como quieras, empieza a estudiar al instante

Sin suscripción, sin compromisos. Paga como estés acostumbrado con tarjeta de crédito y descarga tu documento PDF inmediatamente.

Student with book image

“Comprado, descargado y aprobado. Así de fácil puede ser.”

Alisha Student

Preguntas frecuentes