AWS-CWI Part B Test 1 | AWS-CWI Part
B, Book Of Specifications | Latest
2024/25
There is a weld that was bent outside the bend radius of the shoe and no fracture on the
ii ii ii ii ii ii ii ii ii ii ii ii ii ii ii ii ii ii
bend. what should be done when this is noted? - Cut another specimen from the original
ii ii ii ii ii ii ii ii ii ii ii ii ii ii ii ii ii ii
specimen and bend it.
ii ii ii ii
All structural steel fillet welds that has a "W" (width) of 1" or greater shall have no
ii ii ii ii ii ii ii ii ii ii ii ii ii ii ii ii ii
convexitity greater than __________? - 3/16"
ii ii ii ii ii ii ii ii
How should the weld reinforcement and backing be prepared prior to mechanical
ii ii ii ii ii ii ii ii ii ii ii ii
bending? - It shall be removed flush with the surface of the specimen.
ii ii ii ii ii ii ii ii ii ii ii ii ii ii ii
which of the following conditions shall cause inadequate penetration (IP) to be considered
ii ii ii ii ii ii ii ii ii ii ii ii ii
a defect? - The length of an individual indication of IP exceeds 1 inch.
ii ii ii ii ii ii ii ii ii ii ii ii ii ii ii ii
A welder was qualified in the 3G position, is he qualified to make a weld in the overhead
ii ii ii ii ii ii ii ii ii ii ii ii ii ii ii ii ii ii
position? - No, he is only qualified for the vertical, horizontal, and flat positions
ii ii ii ii ii ii ii ii ii ii ii ii ii ii ii ii
Cracked welds shall be cut out unless the repair is authorized by the company. when a
ii ii ii ii ii ii ii ii ii ii ii ii ii ii ii ii
crack repair is authorized for pipeline: - A double repair of a crack is not permitted
ii ii ii ii ii ii ii ii ii ii ii ii ii ii ii ii ii ii
ii what is the abbreviation for inside diameter? - ID
ii ii ii ii ii ii ii ii ii ii
ii What is the abbreviation for leak testing? - LT
ii ii ii ii ii ii ii ii ii ii
If a procedure qualification record is qualified on a plate test in the 3G position, does it
ii ii ii ii ii ii ii ii ii ii ii ii ii ii ii ii ii
qualify a welding procedure specification in all positions? - Yes, being as position is not
ii ii ii ii ii ii ii ii ii ii ii ii ii ii ii ii ii
listed as a procedure qualification variable on table 8.
ii ii ii ii ii ii ii ii ii
Arc burns on the parent metal shall not exceed ________ in length? - never accepted,
ii ii ii ii ii ii ii ii ii ii ii ii ii ii ii ii ii
regardless of their length
ii ii ii ii
ii What is an alternate term for weld face in the pipeline application? - Crown surface.
ii ii ii ii ii ii ii ii ii ii ii ii ii ii ii ii
When more than one welder is welding on the same test piece for qualification, failure of
ii ii ii ii ii ii ii ii ii ii ii ii ii ii ii ii
any portion of a single test weldment for performance qualification constitutes failure for
ii ii ii ii ii ii ii ii ii ii ii ii ii
what. - All processes used in the test, All welders in the test.
ii ii ii ii ii ii ii ii ii ii ii ii ii ii ii
True or False: the number of filler and finish beads should allow the completed weld
ii ii ii ii ii ii ii ii ii ii ii ii ii ii ii
substitutionally uniform cross section around the circumference of the pipe? - True.
ii ii ii ii ii ii ii ii ii ii ii ii ii ii
B, Book Of Specifications | Latest
2024/25
There is a weld that was bent outside the bend radius of the shoe and no fracture on the
ii ii ii ii ii ii ii ii ii ii ii ii ii ii ii ii ii ii
bend. what should be done when this is noted? - Cut another specimen from the original
ii ii ii ii ii ii ii ii ii ii ii ii ii ii ii ii ii ii
specimen and bend it.
ii ii ii ii
All structural steel fillet welds that has a "W" (width) of 1" or greater shall have no
ii ii ii ii ii ii ii ii ii ii ii ii ii ii ii ii ii
convexitity greater than __________? - 3/16"
ii ii ii ii ii ii ii ii
How should the weld reinforcement and backing be prepared prior to mechanical
ii ii ii ii ii ii ii ii ii ii ii ii
bending? - It shall be removed flush with the surface of the specimen.
ii ii ii ii ii ii ii ii ii ii ii ii ii ii ii
which of the following conditions shall cause inadequate penetration (IP) to be considered
ii ii ii ii ii ii ii ii ii ii ii ii ii
a defect? - The length of an individual indication of IP exceeds 1 inch.
ii ii ii ii ii ii ii ii ii ii ii ii ii ii ii ii
A welder was qualified in the 3G position, is he qualified to make a weld in the overhead
ii ii ii ii ii ii ii ii ii ii ii ii ii ii ii ii ii ii
position? - No, he is only qualified for the vertical, horizontal, and flat positions
ii ii ii ii ii ii ii ii ii ii ii ii ii ii ii ii
Cracked welds shall be cut out unless the repair is authorized by the company. when a
ii ii ii ii ii ii ii ii ii ii ii ii ii ii ii ii
crack repair is authorized for pipeline: - A double repair of a crack is not permitted
ii ii ii ii ii ii ii ii ii ii ii ii ii ii ii ii ii ii
ii what is the abbreviation for inside diameter? - ID
ii ii ii ii ii ii ii ii ii ii
ii What is the abbreviation for leak testing? - LT
ii ii ii ii ii ii ii ii ii ii
If a procedure qualification record is qualified on a plate test in the 3G position, does it
ii ii ii ii ii ii ii ii ii ii ii ii ii ii ii ii ii
qualify a welding procedure specification in all positions? - Yes, being as position is not
ii ii ii ii ii ii ii ii ii ii ii ii ii ii ii ii ii
listed as a procedure qualification variable on table 8.
ii ii ii ii ii ii ii ii ii
Arc burns on the parent metal shall not exceed ________ in length? - never accepted,
ii ii ii ii ii ii ii ii ii ii ii ii ii ii ii ii ii
regardless of their length
ii ii ii ii
ii What is an alternate term for weld face in the pipeline application? - Crown surface.
ii ii ii ii ii ii ii ii ii ii ii ii ii ii ii ii
When more than one welder is welding on the same test piece for qualification, failure of
ii ii ii ii ii ii ii ii ii ii ii ii ii ii ii ii
any portion of a single test weldment for performance qualification constitutes failure for
ii ii ii ii ii ii ii ii ii ii ii ii ii
what. - All processes used in the test, All welders in the test.
ii ii ii ii ii ii ii ii ii ii ii ii ii ii ii
True or False: the number of filler and finish beads should allow the completed weld
ii ii ii ii ii ii ii ii ii ii ii ii ii ii ii
substitutionally uniform cross section around the circumference of the pipe? - True.
ii ii ii ii ii ii ii ii ii ii ii ii ii ii
