BMW Associate Level ASE Latest Test Exam Written With Accurate Answers 2024

BMW Associate Level ASE Latest Test Exam Written With Accurate Answers 2024 A lifting pad must be in place to lift a BMW vehicle, T or F? Correct Answer True A technician should consider which of the following questions for a quality control process after performing service work to a vehicle? Did I address all concerns? Did I top off all fluids and set tire pressure? Did I reset service lights? All of the above Correct Answer All of the above According to MSDS warning symbols, the warning symbol with a skull and cross bones shown represents Correct Answer Acute toxicity All BMW special tools are autoship to the dealer. True or False? Correct Answer False All brand new BMW vehicles require a QC1 inspection. Tech A states that transport Mode should be deleted using ISTA. Tech B says that transport mode should be deleted using the transport mode switching device. Correct Answer Both A and B All of the following are true concerning the Roundtable, EXCEPT : There are 12 shows each year. Each Roundtable has a bulletin describing the topics. The Roundtable is accessed through AIR. Each Roundtable has a quiz Correct Answer The Roundtable is accessed through AIR. Battery voltage is not critical when performing a voltage drop on a circuit. True or False? Correct Answer Flase BMW recommends replacing tire at least every 6 years what resource can you use to determine that the above statement is correct? Correct Answer Owners Manual BMW special took can be used during an inspection to measure: Coolant level Coolant concentrate Brake pad thickness and tire thread depth Air pressure Correct Answer Brake pad thickness and tire thread depth CPO inspections require a minimum tread depth of 3 mm, as measured from the lowest area in the tread. T or F? Correct Answer False (from top of wear indicators) During a CPO inspection, a front brake pad measurement is taken of 4mm on the left inner pad and 7mm on the left outer pad. Technician A says the pads are within specifications. Technician B says the inner pad is at the minimum allowed specifications. Who is correct? Correct Answer Neither A or B During a CPO inspection, all of the following items will need to be addressed before the CPO sale, EXCEPT: Mismatched tires Aftermarket windshield OEM brake pads with 4mm thickness of material remaining Wheel with a lateral runout of 1.2mm Correct Answer Aftermarket windshield During a CPO inspection, which of the following will irreversibly disqualify a vehicle from the CPO program: Modified suspension Aftermarket windshield Genuine BMW Performance exhaust Aftermarket brake pads Correct Answer Modified Suspension Engine oil Top-up services may be reimbursed under the terms of the BMW Maintenance Program when it is "active" on the vehicle. Correct Answer True If the vehicle is placed in transport mode and the vehicle battery voltage drops below 12 volts