• ¿Documento equivocado? Cámbialo gratis
  • Escrito por estudiantes que aprobaron
  • Inmediatamente disponible después del pago
  • Leer en línea o como PDF
Vender
¿Dónde estudias?
Tu idioma
Document preview thumbnail
Vista previa 2 fuera de 8 páginas
Examen

API 1169. Study test questions test

Document preview thumbnail
Vista previa 2 fuera de 8 páginas

API 1169. Study test questions test RM#2 According to OSHA a "protective system" is defined as: Method of protecting employees from cave-ins. Design and development inputs shall be identified and reviewed for? Accuracy, completeness and lack of conflict The Excavator calls the One Call Center prior to excavation at least Two working days nor more than ten working days Encroachment Area is the area where the ground disturbance occurs within: 50 feet of the centerline of the existing facility (or ROW) or other easement The pressure recorders and deadweight gauge shall be located at a safe distance at least: 100 feet from the facility being tested In compliance with the Uniform Color Code the route and or area to be excavated shall be identified by: White markers Markings may include one or any combination of the following: paint, chalk, flags, stakes, brushes, or offsets. Matching markings to existing and expected surface conditions is the responsibility of? Facility Owner Subpart G of 49CFR192 prescribes minimum requirements for: Construction of transmission pipelines and mains. If a newspaper was seeking information about the project, are inspection personnel allowed to interac with them to answer their questions? Only if expressly allowed Before placing new gas pipelines in service all piping and components must be subjected to: 125% of MOP (maximum operational pressure) of the system for 4 hours A detailed design developed from operating requirements and conforming to Code requirements including all necessary drawings and specifications, goveming a liquid petroleum pipeline installation is also known as? Engineering design Planned, systematic, and preventative actions that are required to ensure that materials, products and services will meet specified requirements is called? Quality Control system Any physical objects detected by an in-line inspection device that may be anomalies, components, nearby metallic objects, or some other item are also known as? Features Which describes "rework" the best? Any grinding or welding on a completed weld to correct potentially rejectable indications General basic requirements for Chief Inspector qualification are? Environmental and pollution control

Vista previa del contenido

API 1169. Study test questions test RM#2
According to OSHA a "protective system" is defined as:
Method of protecting employees from cave-ins.


Design and development inputs shall be identified and reviewed for?
Accuracy, completeness and lack of conflict


The Excavator calls the One Call Center prior to excavation at least
Two working days nor more than ten working days


Encroachment Area is the area where the ground disturbance occurs within:
50 feet of the centerline of the existing facility (or ROW) or other easement


The pressure recorders and deadweight gauge shall be located at a safe distance at least:
100 feet from the facility being tested


In compliance with the Uniform Color Code the route and or area to be excavated shall be identified
by:
White markers


Markings may include one or any combination of the following: paint, chalk, flags, stakes, brushes, or
offsets. Matching markings to existing and expected surface conditions is the responsibility of?
Facility Owner


Subpart G of 49CFR192 prescribes minimum requirements for:
Construction of transmission pipelines and mains.


If a newspaper was seeking information about the project, are inspection personnel allowed to
interac with them to answer their questions?
Only if expressly allowed


Before placing new gas pipelines in service all piping and components must be subjected to:
125% of MOP (maximum operational pressure) of the system for 4 hours


A detailed design developed from operating requirements and conforming to Code requirements
including all necessary drawings and specifications, goveming a liquid petroleum pipeline installation
is also known as?
Engineering design


Planned, systematic, and preventative actions that are required to ensure that materials, products
and services will meet specified requirements is called?
Quality Control system

, Any physical objects detected by an in-line inspection device that may be anomalies, components,
nearby metallic objects, or some other item are also known as?
Features


Which describes "rework" the best?
Any grinding or welding on a completed weld to correct potentially rejectable indications


General basic requirements for Chief Inspector qualification are?
Environmental and pollution control


What type of hazard is a waterway crossing?
Site-Specific


What would a continuous run of pipe between adjacent blocks valves be called?
A pipeline section


Does a section of pipe removed and scheduled for reuse, but then reinstalled in the same loca need to
be retested?
No testing required


In intemational codes and standards, this is often referred to as the maximum steady state op
pressure or maximum allowable operating pressure
Operating pressure limit


The letter "I" identifies shipping names appropriate for:
.Describing materials in intermational transportation


Who is responsible for all safety on the job site?
Contractor


What identifies hazards that necessitate the use of PPE?
JSA


Which is an example of a sustained load?
The weight of the pipeline including components, fluids, and slurries


What is the standard of acceptance for welds of piping systems operating at hoop stress levels 50% of
the SMYS?
ASME B31,8


In regards to road and highway use, what should the Inspector be aware of?
Size and weight restrictions for heavy equipment


It is not necessary to vary the design stress for metal temperatures between what range?

Información del documento

Subido en
13 de junio de 2024
Número de páginas
8
Escrito en
2023/2024
Tipo
Examen
Contiene
Preguntas y respuestas
$11.49

¿Documento equivocado? Cámbialo gratis Dentro de los 14 días posteriores a la compra y antes de descargarlo, puedes elegir otro documento. Puedes gastar el importe de nuevo.
Escrito por estudiantes que aprobaron
Inmediatamente disponible después del pago
Leer en línea o como PDF

Seller avatar
Los indicadores de reputación están sujetos a la cantidad de artículos vendidos por una tarifa y las reseñas que ha recibido por esos documentos. Hay tres niveles: Bronce, Plata y Oro. Cuanto mayor reputación, más podrás confiar en la calidad del trabajo del vendedor.
ACADEMICAIDSTORE
4.1
(176)
Vendido
1224
Seguidores
894
Artículos
12801
Última venta
1 mes hace



Por qué los estudiantes eligen Stuvia

Creado por compañeros estudiantes, verificado por reseñas

Calidad en la que puedes confiar: escrito por estudiantes que aprobaron y evaluado por otros que han usado estos resúmenes.

¿No estás satisfecho? Elige otro documento

¡No te preocupes! Puedes elegir directamente otro documento que se ajuste mejor a lo que buscas.

Paga como quieras, empieza a estudiar al instante

Sin suscripción, sin compromisos. Paga como estés acostumbrado con tarjeta de crédito y descarga tu documento PDF inmediatamente.

Student with book image

“Comprado, descargado y aprobado. Así de fácil puede ser.”

Alisha Student

Preguntas frecuentes