Small Engines Chapter 1 Review
Failure to adhere to safety rules in the small engine shop could lead to serious _______ or
________. - correct answer-Injury / Death
Safety in the small engine shop is _______ responsibility. - correct answer-The
Gasoline and other flammable liquids give off vapors that can _________ if exposed to heat
or flame. - correct answer-Explode
Never pour gasoline into the tank of a(n) ________ engine. - correct answer-Active
Tools that have been used should always be _______ and replaced neatly in a toolbox or
workbench storage place. - correct answer-Cleaned
Why should gasoline never be used as a cleaning solvent? - correct answer-If you used as a
solvent, gasoline could release toxic fumes.
When working with small gas engines, _____________ should not be worn. - correct
answer-Loose clothing, jewelry, and/or neckties
___________ and ____________ are worn for ear/hearing protection. - correct
answer-Ear-plugs / Ear-phone-type protection
Four common types of excessive noise. - correct answer-People talking, tools falling, phones
going off, etc.
To prevent foot and toe injury, _______ _______ should be worn. - correct answer-Safety
Shoes
Breathing small amounts of CO2 can cause __________ and ________ - correct
answer-Headaches / Drowsiness
For protection against air containment in the shop, a personal ___________ should be worn
by the technician. - correct answer-Respirators
When using hammers, handles must be in good condition and hammer heads must be
_________ so that they do not come off. - correct answer-Secured
Power tools should have all ________ and _________ in place. - correct answer-Guards /
Shields
What is the purpose of a dead man switch? - correct answer-To prevent pieces moving
without the operator's control
Failure to adhere to safety rules in the small engine shop could lead to serious _______ or
________. - correct answer-Injury / Death
Safety in the small engine shop is _______ responsibility. - correct answer-The
Gasoline and other flammable liquids give off vapors that can _________ if exposed to heat
or flame. - correct answer-Explode
Never pour gasoline into the tank of a(n) ________ engine. - correct answer-Active
Tools that have been used should always be _______ and replaced neatly in a toolbox or
workbench storage place. - correct answer-Cleaned
Why should gasoline never be used as a cleaning solvent? - correct answer-If you used as a
solvent, gasoline could release toxic fumes.
When working with small gas engines, _____________ should not be worn. - correct
answer-Loose clothing, jewelry, and/or neckties
___________ and ____________ are worn for ear/hearing protection. - correct
answer-Ear-plugs / Ear-phone-type protection
Four common types of excessive noise. - correct answer-People talking, tools falling, phones
going off, etc.
To prevent foot and toe injury, _______ _______ should be worn. - correct answer-Safety
Shoes
Breathing small amounts of CO2 can cause __________ and ________ - correct
answer-Headaches / Drowsiness
For protection against air containment in the shop, a personal ___________ should be worn
by the technician. - correct answer-Respirators
When using hammers, handles must be in good condition and hammer heads must be
_________ so that they do not come off. - correct answer-Secured
Power tools should have all ________ and _________ in place. - correct answer-Guards /
Shields
What is the purpose of a dead man switch? - correct answer-To prevent pieces moving
without the operator's control
