BICSI Practice Test-Retake Questions
and Answers/ 2024-2025.
The 2 main considerations concerning the existing cabling are? - Answer:
Grandfathered system
Abandoned cable 11-25
The type of cutover where cross-connects are relocated one pair after another
until completed is called a - Answer: rolling cut 11-28
1|Page
,Which practice involves moving the customer to a temporary office space until
their section of the retrofit is completed and then moving them back to their
recabled office space? - Answer: Swing space phasing
Which of these testers would you clamp around a strand of fiber to check for the
presence of light? - Answer: Fiber strand identifier 11-11
A ______ provides a quick graphical representation of how the circuit is layed out?
- Answer: CLR 11-27
A ______ uses several pluggable modules to locate and Identify cables. - Answer:
Office locator kit
A _________ injects light (at a proper wavelength) and measures the results t the
other end. - Answer: Light source and power meter
A ________ detects the presence of light within a fiber strand - Answer: Fiber
strand identifier
A _______ uses a laser to identify fiber strands and find breaks in the fiber at the
near end. - Answer: Visual fault locator
A________ will leave the customer momentarily without communications -
Answer: Hot-cut 11-28
2|Page
, During a _______, cross-connects are relocated one pair after another until
completed. - Answer: Rolling cut
*_________ is a property of an electromagnetic field built around a conductor
that opposes any changes in current flow in a circuit. - Answer: Inductance
____________ is a property of conductors that allows storage of electrical charges
when potential differences (voltages) exist between the conductors. - Answer:
Capacitance
*In AC circuits, the total opposition to current flow is called _________, which is
measured in ohms. - Answer: Impedance
The nominal characteristic impedance of balanced twisted pair cable is _______
ohms at 100 MHz - Answer: 100
Pair 626 would be in the __________ Super Binder - Answer: Red
Series ______ is the preferred choice for longer runs - Answer: 11
The _________ connector/s have center pins (choose all that apply) - Answer: N
BNC
3|Page
and Answers/ 2024-2025.
The 2 main considerations concerning the existing cabling are? - Answer:
Grandfathered system
Abandoned cable 11-25
The type of cutover where cross-connects are relocated one pair after another
until completed is called a - Answer: rolling cut 11-28
1|Page
,Which practice involves moving the customer to a temporary office space until
their section of the retrofit is completed and then moving them back to their
recabled office space? - Answer: Swing space phasing
Which of these testers would you clamp around a strand of fiber to check for the
presence of light? - Answer: Fiber strand identifier 11-11
A ______ provides a quick graphical representation of how the circuit is layed out?
- Answer: CLR 11-27
A ______ uses several pluggable modules to locate and Identify cables. - Answer:
Office locator kit
A _________ injects light (at a proper wavelength) and measures the results t the
other end. - Answer: Light source and power meter
A ________ detects the presence of light within a fiber strand - Answer: Fiber
strand identifier
A _______ uses a laser to identify fiber strands and find breaks in the fiber at the
near end. - Answer: Visual fault locator
A________ will leave the customer momentarily without communications -
Answer: Hot-cut 11-28
2|Page
, During a _______, cross-connects are relocated one pair after another until
completed. - Answer: Rolling cut
*_________ is a property of an electromagnetic field built around a conductor
that opposes any changes in current flow in a circuit. - Answer: Inductance
____________ is a property of conductors that allows storage of electrical charges
when potential differences (voltages) exist between the conductors. - Answer:
Capacitance
*In AC circuits, the total opposition to current flow is called _________, which is
measured in ohms. - Answer: Impedance
The nominal characteristic impedance of balanced twisted pair cable is _______
ohms at 100 MHz - Answer: 100
Pair 626 would be in the __________ Super Binder - Answer: Red
Series ______ is the preferred choice for longer runs - Answer: 11
The _________ connector/s have center pins (choose all that apply) - Answer: N
BNC
3|Page
